Magnetically actuated mobile microrobots can access distant, enclosed, and small spaces, such as inside microfluidic channels and the human body, making them appealing for minimally invasive tasks. ...Despite their simplicity when scaling down, creating collective microrobots that can work closely and cooperatively, as well as reconfigure their formations for different tasks, would significantly enhance their capabilities such as manipulation of objects. However, a challenge of realizing such cooperative magnetic microrobots is to program and reconfigure their formations and collective motions with under-actuated control signals. This article presents a method of controlling 2D static and time-varying formations among collective self-repelling ferromagnetic microrobots (100
μ
m to 350
μ
m in diameter, up to 260 in number) by spatially and temporally programming an external magnetic potential energy distribution at the air–water interface or on solid surfaces. A general design method is introduced to program external magnetic potential energy using ferromagnets. A predictive model of the collective system is also presented to predict the formation and guide the design procedure. With the proposed method, versatile complex static formations are experimentally demonstrated and the programmability and scaling effects of formations are analyzed. We also demonstrate the collective mobility of these magnetic microrobots by controlling them to exhibit bio-inspired collective behaviors such as aggregation, directional motion with arbitrary swarm headings, and rotational swarming motion. Finally, the functions of the produced microrobotic swarm are demonstrated by controlling them to navigate through cluttered environments and complete reconfigurable cooperative manipulation tasks.
Stimuli-responsive hydrogel actuators have promising applications in various fields. However, the typical hydrogel actuation relies on the swelling and de-swelling process caused by osmotic-pressure ...changes, which is slow and normally requires the presence of water environment. Herein, we report a light-powered in-air hydrogel actuator with remarkable performances, including ultrafast motion speed (up to 1.6 m/s), rapid response (as fast as 800 ms) and high jumping height (~15 cm). The hydrogel is operated based on a fundamentally different mechanism that harnesses the synergetic interactions between the binary constituent parts, i.e. the elasticity of the poly(sodium acrylate) hydrogel, and the bubble caused by the photothermal effect of the embedded magnetic iron oxide nanoparticles. The current hydrogel actuator exhibits controlled motion velocity and direction, making it promising for a wide range of mobile robotics, soft robotics, sensors, controlled drug delivery and other miniature device applications.
The functionalities of the untethered miniature swimming robots significantly decrease as the robot size becomes smaller, due to limitations of feasible miniaturized on-board components. Here we ...propose an untethered jellyfish-inspired soft millirobot that could realize multiple functionalities in moderate Reynolds number by producing diverse controlled fluidic flows around its body using its magnetic composite elastomer lappets, which are actuated by an external oscillating magnetic field. We particularly investigate the interaction between the robot's soft body and incurred fluidic flows due to the robot's body motion, and utilize such physical interaction to achieve different predation-inspired object manipulation tasks. The proposed lappet kinematics can inspire other existing jellyfish-like robots to achieve similar functionalities at the same length and time scale. Moreover, the robotic platform could be used to study the impacts of the morphology and kinematics changing in ephyra jellyfish.
Mobile microrobotics has emerged as a new robotics field within the last decade to create untethered tiny robots that can access and operate in unprecedented, dangerous, or hard‐to‐reach small spaces ...noninvasively toward disruptive medical, biotechnology, desktop manufacturing, environmental remediation, and other potential applications. Magnetic and optical actuation methods are the most widely used actuation methods in mobile microrobotics currently, in addition to acoustic and biological (cell‐driven) actuation approaches. The pros and cons of these actuation methods are reported here, depending on the given context. They can both enable long‐range, fast, and precise actuation of single or a large number of microrobots in diverse environments. Magnetic actuation has unique potential for medical applications of microrobots inside nontransparent tissues at high penetration depths, while optical actuation is suitable for more biotechnology, lab‐/organ‐on‐a‐chip, and desktop manufacturing types of applications with much less surface penetration depth requirements or with transparent environments. Combining both methods in new robot designs can have a strong potential of combining the pros of both methods. There is still much progress needed in both actuation methods to realize the potential disruptive applications of mobile microrobots in real‐world conditions.
Magnetic and optical actuation methods used in mobile microrobotics systems in different contexts are compared with regard to their pros and cons. They can both enable long‐range, fast, and precise actuation of a single microrobot or a swarm of microrobots. Magnetic actuation has high potential for medical applications inside nontransparent deep tissues, while optical actuation is promising for transparent environments or close‐to‐surface tissues.
Mobile sub‐millimeter micro‐robots have demonstrated untethered motion and transport of cargo in remote, confined or enclosed environments. However, limited by simple design and actuation, they lack ...remotely‐actuated on‐board mechanisms required to perform complex tasks such as object assembly. A flexible patterned magnetic material which allows internal actuation, resulting in a mobile micro‐gripper which is driven and actuated by magnetic fields, is introduced here. By remotely controlling the magnetization direction of each micro‐gripper arm, a gripping motion which can be combined with locomotion for precise transport, orientation, and programmable three‐dimensional assembly of micro‐parts in remote environments is demonstrated. This allows the creation of out‐of‐plane 3D structures and mechanisms made from several building blocks. Using multiple magnetic materials in each micro‐gripper, the addressable actuation of gripper teams for parallel, distributed operation is also demonstrated. These mobile micro‐grippers can potentially be applied to 3D assembly of heterogeneous meta‐materials, construction of medical devices inside the human body, the study of biological systems in micro‐fluidic channels, 3D micro‐device prototyping or desktop micro‐factories.
A robotic micro‐gripper is made from a flexible patterned magnetic composite material. By remotely controlling the magnetization direction of each micro‐gripper arm, grasping motion is combined with locomotion for precise transport, orientation, and programmable three‐dimensional assembly of micro‐parts in remote environments.
Untethered synthetic microrobots have significant potential to revolutionize minimally invasive medical interventions in the future. However, their relatively slow speed and low controllability near ...surfaces typically are some of the barriers standing in the way of their medical applications. Here, we introduce acoustically powered microrobots with a fast, unidirectional surface-slipping locomotion on both flat and curved surfaces. The proposed three-dimensionally printed, bullet-shaped microrobot contains a spherical air bubble trapped inside its internal body cavity, where the bubble is resonated using acoustic waves. The net fluidic flow due to the bubble oscillation orients the microrobot’s axisymmetric axis perpendicular to the wall and then propels it laterally at very high speeds (up to 90 body lengths per second with a body length of 25 μm) while inducing an attractive force toward the wall. To achieve unidirectional locomotion, a small fin is added to the microrobot’s cylindrical body surface, which biases the propulsion direction. For motion direction control, the microrobots are coated anisotropically with a soft magnetic nanofilm layer, allowing steering under a uniform magnetic field. Finally, surface locomotion capability of the microrobots is demonstrated inside a three-dimensional circular cross-sectional microchannel under acoustic actuation. Overall, the combination of acoustic powering and magnetic steering can be effectively utilized to actuate and navigate these microrobots in confined and hard-to-reach body location areas in a minimally invasive fashion.
Self-healing materials are indispensable for soft actuators and robots that operate in dynamic and real-world environments, as these machines are vulnerable to mechanical damage. However, current ...self-healing materials have shortcomings that limit their practical application, such as low healing strength (below a megapascal) and long healing times (hours). Here, we introduce high-strength synthetic proteins that self-heal micro- and macro-scale mechanical damage within a second by local heating. These materials are optimized systematically to improve their hydrogen-bonded nanostructure and network morphology, with programmable healing properties (2-23 MPa strength after 1 s of healing) that surpass by several orders of magnitude those of other natural and synthetic soft materials. Such healing performance creates new opportunities for bioinspired materials design, and addresses current limitations in self-healing materials for soft robotics and personal protective equipment.
As we move towards the miniaturization of devices to perform tasks at the nano and microscale, it has become increasingly important to develop new methods for actuation, sensing, and control. Over ...the past decade, bio‐hybrid methods have been investigated as a promising new approach to overcome the challenges of scaling down robotic and other functional devices. These methods integrate biological cells with artificial components and therefore, can take advantage of the intrinsic actuation and sensing functionalities of biological cells. Here, the recent advancements in bio‐hybrid actuation are reviewed, and the challenges associated with the design, fabrication, and control of bio‐hybrid microsystems are discussed. As a case study, focus is put on the development of bacteria‐driven microswimmers, which has been investigated as a targeted drug delivery carrier. Finally, a future outlook for the development of these systems is provided. The continued integration of biological and artificial components is envisioned to enable the performance of tasks at a smaller and smaller scale in the future, leading to the parallel and distributed operation of functional systems at the microscale.
The use of live biological cells as bio‐hybrid actuators has led to the development of novel microsystems. These systems utilize the sophisticated sensing and actuation capabilities of biological cells, enabling functional tasks to be performed at the microscale. Here, the recent advancements in the fabrication, design, and control of these bio‐hybrid microsystems are reviewed.
This review comprises a detailed survey of ongoing methodologies for soft actuators, highlighting approaches suitable for nanometer‐ to centimeter‐scale robotic applications. Soft robots present a ...special design challenge in that their actuation and sensing mechanisms are often highly integrated with the robot body and overall functionality. When less than a centimeter, they belong to an even more special subcategory of robots or devices, in that they often lack on‐board power, sensing, computation, and control. Soft, active materials are particularly well suited for this task, with a wide range of stimulants and a number of impressive examples, demonstrating large deformations, high motion complexities, and varied multifunctionality. Recent research includes both the development of new materials and composites, as well as novel implementations leveraging the unique properties of soft materials.
Ongoing soft‐actuator development is reviewed in detail, highlighting approaches suitable for nanometer‐ to centimeter‐scale robotic applications. These types of systems are often untethered and their actuation and sensing are often highly integrated. Soft, active materials are particularly well suited for these applications, with a wide range of stimulants, large deformations, high motion complexities, and varied multifunctionality.
This paper proposes a magnetically actuated soft capsule endoscope (MASCE) as a tetherless miniature mobile robot platform for diagnostic and therapeutic medical applications inside the stomach. Two ...embedded internal permanent magnets and a large external magnet are used to actuate the robot remotely. The proposed MASCE has three novel features. First, its outside body is made of soft elastomer-based compliant structures. Such compliant structures can deform passively during the robot-tissue contact interactions, which makes the device safer and less invasive. Next, it can be actively deformed in the axial direction by using external magnetic actuation, which provides an extra degree of freedom that enables various advanced functions such as axial position control, drug releasing, drug injection, or biopsy. Finally, it navigates in three dimensions by rolling on the stomach surface as a new surface locomotion method inside the stomach. Here, the external attractive magnetic force is used to anchor the robot on a desired location, and the external magnetic torque is used to roll it to another location, which provides a stable, continuous, and controllable motion. The paper presents design and fabrication methods for the compliant structures of the robot with its axial deformation and position control capability. Rolling-based surface locomotion of the robot using external magnetic torques is modeled, and its feasibility is tested and verified on a synthetic stomach surface by using a magnetically actuated capsule endoscope prototype.
PDF
