Objective The chimney/snorkel endovascular aortic repair (ch-EVAR) is gaining ever-greater acceptance in the treatment of pararenal pathologic processes. However, the published experience includes ...mainly short-term clinical results with combinations of several abdominal devices and types of chimney grafts. The aim of this study was the midterm evaluation of the Endurant stent graft (Medtronic, Santa Rosa, Calif) as a standard abdominal device for ch-EVAR. Methods Between January 2009 and January 2013, prospectively collected data of high-risk patients with pararenal pathologic processes who underwent ch-EVAR with placement of the Endurant abdominal device were analyzed. The chimney graft intended for use was a balloon-expandable covered stent. Main outcome measures were aneurysm sac regression and chimney graft patency. Results A total of 187 snorkel/chimney grafts were successfully placed in 128 patients (mean age, 76.6 years). The technical success was 100%. The mean preoperative proximal neck length and aneurysm size were 4.7 mm and 64.8 mm (range, 48-135 mm), respectively. The postoperative new neck length after use of chimney grafts was 18.7 ± 6.3 mm. The mean aneurysm sac decreased significantly (60.8 mm; 95% confidence interval, 2.036-7.084; P = .001) after a mean radiologic follow up of 24.6 ± 17.4 months. Thirty-day mortality and midterm mortality were 0.8% and 17.2%, respectively. Two patients (1.6%) with single chimneys presented with late new onset of type Ia endoleak and underwent additional tube and multiple chimney placement. Primary chimney graft patency was 95.7%. Freedom from chimney graft-related reinterventions was 93.1%. Conclusions Standard use of the Endurant abdominal device for ch-EVAR in >120 patients is associated with high technical success, significant aneurysm sac regression, and low incidence of secondary procedures after 2-year radiologic follow-up. These results will give significant impetus to device selection, facilitating the standardization of technique.
Background and Objectives: This study aims to identify the minor allele of the single nucleotide polymorphisms (SNPs) DAB2IP rs7025486, IL6R rs2228145, CDKN2BAS rs10757278, LPA rs3798220, LRP1 ...rs1466535, and SORT1 rs599839 in order to assess the risk of abdominal aortic aneurysm (AAA) formation and define the linkage among these SNPs. Materials and Methods: A case-control study with AAA patients (AAA group) and non-AAA controls (control group) was carried out in a study population. DNA was isolated from whole blood samples; the SNPs were amplified using PCR and sequenced. Results: In the AAA group of 148 patients, 87.2% of the patients were male, 64.2% had a history of smoking, and 18.2% had relatives with AAA. The mean ± SD of age, BMI, and aneurysmal diameter in the AAA group were 74.8 ± 8.3 years, 27.6 ± 4.6 kg/m2, and 56.2 ± 11.8 mm, respectively. In comparison with 50 non-AAA patients, there was a significantly elevated presence of the SNPs DAB2IP rs7025486A, CDKN2BAS rs10757278G, and SORT1 rs599839G in the AAA group (p-values 0.040, 0.024, 0.035, respectively), while LPA rs3798220C was significantly higher in the control group (p = 0.049). A haplotype investigation showed that the SNPs DAB2IP, CDKN2BAS, and IL6R rs2228145C were significantly elevated in the AAA group (p = 0.037, 0.037, and 0.046) with minor allele frequencies (MAF) of 25.5%, 10.6%, and 15.4%, respectively. Only DAB2IP and CDKN2BAS showed significantly higher occurrences of a mutation (p = 0.028 and 0.047). Except for LPA, all SNPs were associated with a large aortic diameter in AAA (p < 0.001). Linkage disequilibrium detection showed that LPA to DAB2IP, to IL6R, to CDKN2BAS, and to LRP1 rs1466535T had D’ values of 70.9%, 80.4%, 100%, and 100%, respectively. IL6R to LRP1 and to SORT1 had values for the coefficient of determination (r2) of 3.9% and 2.2%, respectively. Conclusions: In the investigated study population, the SNPs CDKN2BAS rs10757278, LPA rs3798220, SORT1 rs599839, DAB2IP rs7025486, and IL6R rs2228145 were associated with the development of abdominal aortic aneurysms. Individuals with risk factors for atherosclerosis and/or a family history of AAA should be evaluated using genetic analysis.
Until today, no dedicated bridging stent graft (BSG) has been available for use in fenestrated and branched endovascular aneurysm repair (F/BEVAR). The purpose of this study was to evaluate the ...clinical performance of the well-known Advanta/iCast V12 (Getinge Maquet, Rastatt, Germany) and the new Viabahn VBX (W. L. Gore & Associates, Flagstaff, Ariz) balloon-expandable stent graft in F/BEVAR.
Retrospective analysis of prospectively collected data was performed. Inclusion criteria were treatment with fenestrated or branched endografts for complex aortic diseases, implantation of at least one VBX stent graft as a BSG in one of the target vessels, and clinical or radiologic follow-up of 6 months. The primary end point of the study was technical success of all BSGs, defined as placement of the BSG in the desired position with absence of endoleak on final angiography. Secondary end points were freedom from perioperative major adverse events and freedom from reinterventions and mortality at 6 months. Procedural and postoperative data were analyzed.
Between December 2017 and July 2018, there were 50 patients (40 male; mean age, 71 years) included. A total of 145 VBX stent grafts were implanted, followed by 57 Advanta V12, 29 Viabahn, and 28 bare-metal stents. There were 126 branches (celiac trunk, 27; superior mesenteric artery, 25; renal arteries, 74) sealed exclusively with VBX. Technical success rate was 98.6%. There were six device-related reinterventions due to type IC endoleaks (n = 4), target vessel stenosis distal to the BSG, and stent graft occlusion in a left renal artery in one case. The perioperative and aneurysm-related mortality was 0%; the 6-month all-cause mortality was 2%.
The used BSGs demonstrated promising preliminary results in F/BEVAR. Further evaluation is mandatory to determine durability of the VBX.
Abstract Objective The introduction of lower profile endografts expanded the application of aortic endovascular repair. However, evidence about their durability is still scarce. The objective of this ...study was to assess longer term durability of the Zenith Alpha Thoracic Stent Graft (Cook Inc, Bloomington, Ind) after thoracic endovascular aortic repair. Methods Prospectively collected data of all patients treated for thoracic aortic aneurysms or penetrating aortic ulcers and having computed tomography angiography-based follow-up of ≥12 months were retrospectively analyzed. The primary end point was ongoing clinical success. Among the secondary end points, stent graft migration and fracture were analyzed. Results Between August 2010 and October 2015, 70 consecutive patients were treated in a single center with the Zenith Alpha stent graft. With computed tomography angiography-based follow-up of 22.3 ± 15.9 months, ongoing clinical success was 87.1%. There were three cases of type Ia endoleak (4.3%), two cases of type Ib endoleak (2.9%), and one case of aneurysm sac enlargement (1.4%). Five patients died postoperatively (7.1%). No type III or type IV endoleak was detected; there was one case of distal stent graft migration and no stent fracture. Reintervention was necessary in one case (1.4%) of a combined type Ia and type II endoleak. There were no conversions to open repair and no ruptures or intraoperative deaths. All-cause mortality was 17.1% at 76 months. Conclusions The Zenith Alpha Thoracic Stent Graft appears to maintain favorable results in a longer time frame with a low incidence of aneurysm sac growth and migration. Results from multicenter prospective trials are needed to validate these data.
Purpose: To evaluate the safety and integrity of a new stent-graft as a potential bridging device in fenestrated stent-grafts using an in vitro fenestrated model. Materials and Methods: Polyester ...test sheets with ten 6-mm- or 8-mm-diameter fenestrations were used to simulate a fenestrated main body endoprosthesis. In total, 50 Viabahn balloon-expandable (VBX) stent-grafts of varying lengths (29 and 39 mm) and diameters (6, 7, and 8 mm) were implanted in the fitting fenestrations. After release, the 6- and 7-mm-diameter stent-grafts were flared with a 10×20-mm angioplasty balloon; a 12×20-mm balloon was used in the 8-mm-diameter devices. Safety of the devices was defined as absence of fractures detected on radiography or computed tomography (CT), as well as material failure detected by microscopy and water permeability testing. The forces (in Newtons, N) needed for perpendicular dislocation (pullout force) and axial dislocation (shear stress force) were also evaluated. Results: Forty VBX stent-grafts were subjected to digital radiographic imaging and multiplanar CT. None showed any stent fracture. Subsequent microscopy indicated no damage to the fabric or separation of the graft after flaring. Ten VBX stent-grafts underwent water permeability testing after flaring; no water passed through the graft wall during a 10-minute period under an intraluminal pressure at 120 mm Hg. Testing of 25 VBX stent-grafts revealed initial pullout forces between 11.3 and 31 N. Shear stress tests showed that the average force needed to dislocate the stent-grafts by 50% of their diameter ranged between 5.75 and 6.91 N (mean 6.1±0.5 N) for the 6-mm stents and between 3.31 and 5.4 N (mean 4.4±0.8) for the 8-mm stents. Conclusion: This preliminary study demonstrated the applicability of the VBX as a bridging stent-graft in a simulated fenestration model. A comparison with other stent-grafts and clinical assessment are required.
Purpose: To compare experimentally the biomechanical properties of the Viabahn Balloon-Expandable Stent Graft (VBX) with the widely used Advanta V12/iCast in the role of bridging stent-grafts for ...fenestrated endovascular aortic repair. Materials and Methods: Test sheets made of polyester having 2 rows of 5 fenestrations in 6-mm and 8-mm diameters were used to simulate a commercially made fenestrated aortic endograft. In total, 40 stent-grafts measuring 6×39 mm and 8×39 mm (10 of each size for each stent-graft) were implanted in fenestration sheets immersed in a 37°C water bath. After flaring, all stent-grafts were evaluated using microscopy and radiography. Biomechanical evaluation included pullout and the shear stress force testing; results are reported in Newtons (N) as the median (minimum–maximum). Results: After flaring, no damage or fracture to the stent-graft structures were detected. Pullout forces for the 6-mm stent-grafts were 27.1 N (20.0–28.9) for the VBX and 16.6 N (14.7–19.2) for the Advanta (p=0.008). Pullout forces for the 8-mm stent-grafts were 20.1 N (14.8–21.5) for the VBX and 15.8 N (12.4–17.5) for the Advanta (p=0.095). The shear stress forces necessary to dislocate the device at 150% stent diameter displacement was 12.5 N (VBX) vs 14.7 N (Advanta) for the 6-mm devices and 23.3 N (VBX) vs 20.2 N (Advanta) for the 8-mm stents (p>0.99 and p=0.222, respectively). Conclusion: In vitro tests simulating external pull and shear forces on bridging stent-grafts implanted in fenestrations showed that the VBX had resistance to dislocation equivalent to a well-known control device.
Purpose
Bridging stent stability is crucial for efficacy and safety of branched aortic endovascular repair (bEVAR) of thoracoabdominal aortic aneurysms (TAAAs). In this study, we assess the ...performance of the new Viabahn Balloon-Expandable endoprosthesis (VBX) in bEVAR. Based on our learning curve we give recommendations for a safe and effective use of the device.
Materials and Methods
We prospectively collected the data of patients with TAAAs undergoing bEVAR between December 2017 and December 2019. All patients with implantation of at least 1 VBX stent-graft as bridging stent were included in our single-center analysis. Demographic, comorbidity, and computed tomography angiography (CTA) data of 112 patients were retrospectively evaluated. Primary endpoint was a composite of branch-related technical success and freedom from target vessel instability. Secondary endpoints were clinical and ongoing clinical success.
Results
Primary endpoint: technical success was achieved in all patients (100%) with a freedom from target vessel instability of 96.3% after a median follow-up of 18 months. Overall mortality was 13.4% (n=15) and 13 patients underwent secondary interventions, 12 of them are still alive and 1 suffered from aneurysm sac expansion, consequently an ongoing clinical success of 75.9% was reached. After modification of the implantation technique during the course of the study by selecting longer stent lengths after accurate estimation of vessel curvature and expected adaptation of the flexible endoskeleton to the specific anatomical conditions, no type Ic endoleaks were observed in the last 70 cases.
Conclusions
The VBX stent-graft can be safely used as bridging stent for branched thoracoabdominal repair. However, learning curve should be considered to avoid type Ic endoleak and edge stenosis. Based on this experience longer landing zones and 2-step deployment of VBX are useful for successful bridging also of challenging target vessels.
Purpose:
To evaluate the efficiency of totally percutaneous endovascular aortic aneurysm repair in a large cohort of patients and to define risk factors for failure with a 10-F vascular closure ...system.
Methods:
A prospective study examined the feasibility and safety of percutaneous femoral artery closure with a single Prostar XL 10-F vascular closure device applied in conjunction with the preclose technique. Between January 2004 and December 2005, 535 consecutive patients were treated for aortic aneurysmal disease. Thirty-five patients were excluded, leaving 500 patients (417 men; mean age 72±6.6 years) treated for aortic aneurysms using the Talent or Zenith stent-graft delivered through sheaths measuring 14-F (191, 21.2%), 16-F (33, 3.7%), 18-F (179, 19.8%), 20-F (2, 0.2%), 22-F (228, 25.2%), and 24-F (271, 29.9%). Primary clinical success was defined as the freedom from additional early or late procedures to treat any complication at the access site. Data were analyzed to reveal any correlation of access site complications or early/late repairs to operator experience or risk factors (obesity, extensive femoral artery calcification, and previous interventions/scars in the groin).
Results:
Primary success was achieved in 96.1% of all percutaneous approaches. Twenty-three patients developed early (n=16) or late (n=7) complications at the access vessel; in 12 cases, hemostasis was achieved using pledgets with the Prostar sutures. No wound complications were recorded. The need for early conversion to an open access correlated with CFA calcification (OR 74.5, 95% CI 17.8 to 310.7; p<0.001) and operator experience (OR 43.2, 95% CI 9.8 to 189.0; p<0.001). The risk of late access site repairs was significantly higher in the presence of a groin scar (OR 48.8, 95% CI 9.2 to 259.0; p<0.001). Correlation of sheath size with early conversion to open access was weaker compared to all the other factors (OR 1.2, CI 95% 1.0 to 1.4; p<0.05). Obesity was not a risk factor for any complication.
Conclusion:
Percutaneous EVAR using the Prostar XL is safe, with minimal early and late complications. Operator experience is one of the most significant predictors of success. Anterior wall calcification and severe fibrosis of the access vessel are also predictors of primary failure, whereas obesity and sheath size are not.
To report the cost of target lesion revascularisation procedures (TLR) for femoropopliteal peripheral artery disease (PAD) following stenting, from a healthcare payer’s perspective.
European ...multicentre study involving consecutive patients requiring femoropopliteal TLR (January 2017 – December 2021). The primary outcome was overall cost (euros) associated with a TLR procedure from presentation to discharge. Exact costs per constituent, clinical characteristics, and early outcomes were reported.
This study included 482 TLR procedures (retrospectively, 13 hospitals, six countries): 56% were female, mean age was 75 ± 2 years, 61% were Rutherford class 5 or 6, 67% had Tosaka class 3 disease, and 16% had common femoral or iliac involvement. A total of 52% were hybrid procedures and 6% involved open surgery only. Technical success was 70%, 30 day mortality rate was 1%, and the 30 day major amputation rate was 4%. Most costs were for operating time during the TLR (healthcare professionals’ salaries, indirect and estate costs), with a mean of: €21 917 ± €2 110 for all procedures; €23 337 ± €8 920 for open procedures; €12 903 ± €3 108 for endovascular procedures; and €22 806 ± €3 977 for hybrid procedures. In a regression analysis, procedure duration was the main parameter associated with higher overall TLR costs (coefficient, 2.77; standard error, 0.88; p < .001). The mean cost per operating minute of TLR (indirect, estate costs, all salaried staff present included) was €177 and the mean cost per night stay in hospital (outside intensive care unit) was €356. The mean cost per overnight intensive care unit stay (minimum of 8 hours per night) was €1 193.
The main driver of the considerable peri-procedure costs associated with femoropopliteal TLR was procedure time.
Purpose: To investigate 2 generations of balloon-expandable covered stents as potential bridging devices using an in vitro model of stent-graft fenestrations. Materials and Methods: Twenty BeGraft ...and 20 BeGraft+ cobalt-chromium stents covered in expanded polytetrafluoroethylene (ePTFE) in 6- and 8-mm diameters were tested in sheets mimicking stent-graft fenestrations. Microscopy and radiography were employed to evaluate stent morphology after flaring. In vitro bench tests measured maximum pullout (perpendicular displacement) and the shear stress (axial displacement) forces needed to dislocate the stents. Results: No alteration of ePTFE coverage was detected in the flared stents. Digital radiography and computed tomography showed marked alteration of the stent geometry, which was more pronounced in the BeGraft group. No fractures were detected. Median (minimum–maximum) pullout forces for the 6-mm stent-grafts were 17.1 N (15.8–19.6) for the BeGraft device and 30.4 N (20.2–31.9) for the BeGraft+ device (p=0.006). Median (minimum–maximum) pullout forces for the 8-mm stent-grafts were 11.3 N (11–12.1) for the BeGraft device and 21.8 N (18.2–25.5) for the BeGraft+ device (p<0.001). The shear stress test showed median forces of 10.5 vs 15.28 N at 150% of the stent diameter for the 6-mm BeGraft and BeGraft+ stent-grafts, respectively, and 15.23 vs 20.72 N at 150% stent diameter for the 8-mm models (p=0.016 and 0.017, respectively). Conclusion: Flaring changed the stent geometry but did not provoke stent fractures. The BeGraft+ is superior to the BeGraft in terms of pullout and shear stress forces, demonstrating greater resilience.