Background The aim of this study was to assess the influence of 3-dimensional (3D) preoperative planning and patient-specific instrument (PSI) guidance of glenoid component positioning on its ...inclination in total shoulder arthroplasty (TSA) and reverse shoulder arthroplasty (RSA). Materials and methods Thirty-six shoulder arthroplasties (12 TSAs, 24 RSAs) were analyzed, of which 18 procedures (6 TSAs, 12 RSAs) were executed using preoperative 3D planning and patient-specific guides to position the central guide pin for glenoid component implantation. In 9 cases, the glenoid anatomy was severely distorted through wear or previous surgery. The inclination of the glenoid component was measured by 2 observers, using the angle between the glenoid baseplate and the floor of the supraspinatus fossa (angle β) on postoperative radiographs. Results For TSA, the average angle β was 74 ± 9 in the PSI group and 86 ± 12 in the non-PSI group; for RSA, the average angle β was 83 ± 7 in the PSI group and 90 ± 17 in the non-PSI group. Extreme angles β, which represent extreme values of glenoid component inclination, are more likely to occur in the non-PSI group than in the PSI group ( P < .001 for TSA; P = .02 for RSA). Conclusions The3D preoperative surgical planning and PSI guidance reduce variability in glenoid component inclination and avoid extreme inclination errors for TSA and RSA.
Osteocyte apoptosis is spatially and temporally linked to bone fatigue‐induced microdamage and to subsequent intracortical remodeling. Specifically, osteocytes surrounding fatigue microcracks in bone ...undergo apoptosis, and those regions containing apoptotic osteocytes co‐localize exactly with areas subsequently resorbed by osteoclasts. Here we tested the hypothesis that osteocyte apoptosis is a key controlling step in the activation and/or targeting of osteoclastic resorption after bone fatigue. We carried out in vivo fatigue loading of ulna from 4‐ to 5‐mo‐old Sprague‐Dawley rats treated with an apoptosis inhibitor (the pan‐caspase inhibitor Q‐VD‐OPh) or with vehicle. Intracortical bone remodeling and osteocyte apoptosis were quantitatively assessed by standard histomorphometric techniques on day 14 after fatigue. Continuous exposure to Q‐VD‐OPh completely blocked both fatigue‐induced apoptosis and the activation of osteoclastic resorption, whereas short‐term caspase inhibition during only the first 2 days after fatigue resulted in >50% reductions in both osteocyte apoptosis and bone resorption. These results (1) show that osteocyte apoptosis is necessary to initiate intracortical bone remodeling in response to fatigue microdamage, (2) indicate a possible dose‐response relationship between the two processes, and (3) suggest that early apoptotic events after fatigue‐induced microdamage may play a substantial role in determining the subsequent course of tissue remodeling.
To systematically review the literature for efficacy of isolated articular mobilization techniques in patients with primary adhesive capsulitis (AC) of the shoulder.
PubMed and Web of Science were ...searched for relevant studies published before November 2014. Additional references were identified by manual screening of the reference lists.
All English language randomized controlled trials evaluating the efficacy of mobilization techniques on range of motion (ROM) and pain in adult patients with primary AC of the shoulder were included in this systematic review. Twelve randomized controlled trials involving 810 patients were included.
Two reviewers independently screened the articles, scored methodologic quality, and extracted data for analysis. The review was conducted and reported according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement. All studies were assessed in duplicate for risk of bias using the Physiotherapy Evidence Database Scale for randomized controlled trials.
The efficacy of 7 different types of mobilization techniques was evaluated. Angular mobilization (n=2), Cyriax approach (n=1), and Maitland technique (n=6) showed improvement in pain score and ROM. With respect to translational mobilizations (n=1), posterior glides are preferred to restore external rotation. Spine mobilizations combined with glenohumeral stretching and both angular and translational mobilization (n=1) had a superior effect on active ROM compared with sham ultrasound. High-intensity mobilization (n=1) showed less improvement in the Constant Murley Score than a neglect group. Finally, positive long-term effects of the Mulligan technique (n=1) were found on both pain and ROM.
Overall, mobilization techniques have beneficial effects in patients with primary AC of the shoulder. Because of preliminary evidence for many mobilization techniques, the Maitland technique and combined mobilizations seem recommended at the moment.
Objective
To summarize factors that are associated with a better treatment outcome after post-operative physical therapy in patients with shoulder arthroplasty.
Data sources
PubMed, Cochrane, and Web ...of Science.
Review methods
Studies examining factors that are associated with a better outcome after post-operative physical therapy interventions in patients with shoulder arthroplasty were included. Two independent reviewers performed screening, extracted data, and assessed the risk of bias and level of evidence, using the Quality In Prognosis Studies tool and Evidence-Based Guideline Development checklist. PRISMA guidelines were followed.
Results
In total, 460 articles were found and 14 studies were included. Two of the included articles had a moderate risk of bias, 12 high. The overall number of patients in the included studies varied from 20 to 2053. Patients had either a reverse (N = 1863), an anatomic total shoulder arthroplasty (N = 1029) or, a hemiarthroplasty (N = 133). Anatomic total shoulder arthroplasty patients with a neutral rotation sling position showed less night pain and greater range of motion, which was awarded moderate evidence. Other modifiable and non-modifiable factors such as telemedicine, immediate range of motion exercises, and pre-operative function were only awarded preliminary or conflicting evidence.
Conclusion
Mainly preliminary and conflicting evidence was found. The possible causes of the conflicting evidence were the different measurement methods, implant types, and follow-up times used. The methodological quality was low and physical therapy protocols differed greatly. More high-quality research with standardized protocols is needed to determine the association of various factors with treatment outcomes after post-operative physical therapy in patients with shoulder arthroplasty.
Purpose The purpose of this cadaveric study was to compare standard and modified coracoid transfer procedures, bicortical and tricortical iliac crest autografts, and tibial plafond and glenoid ...allografts with respect to glenoid surface curvature restoration. Methods Computed tomography scans of 8 cadaveric shoulders were acquired in 9 conditions: (1) intact, (2) 25% width defect, (3) classic Latarjet, (4) modified congruent-arc Latarjet, (5) tricortical iliac crest inner table, (6) outer table, (7) bicortical iliac crest, (8) distal tibia, and (9) glenoid allograft. Outcome measures included articular surface area, width, depth, axial and coronal radius of curvature, and subchondral articular step-off, analyzed in bone and soft-tissue window. Results Reconstruction of the articular surface area was optimal with the glenoid allograft (99.4%), classic Latarjet (97.4%), and iliac crest bicortical graft (93.2%). Depth was best restored by the congruent-arc Latarjet (101.0%), tibial (98.9%), and glenoid (95.3%) allografts. Axial curvature was closely matched by the glenoid allograft (97.5%), classic Latarjet (108.7%), and iliac bicortical graft (91.2%). Coronal curvature was most accurately restored by the glenoid allograft (102.6%), the tibial allograft (115.0%), and the classic Latarjet (55.9%). The articular step-off was smallest using the glenoid allograft. Conclusions Overall, glenoid allografts most accurately restored articular geometry. Alternative grafts provided restoration of some parameters but not others. Classic Latarjet performed well in axial and coronal curvature on average but exhibited large variability. Tibial allograft produced the poorest results in axial curvature, despite excellent coronal curvature reconstruction. The congruent-arc Latarjet did not restore the axial curvature accurately and overcorrected coronal curvature. Graft geometry must be weighed against availability, morbidity, and the role of additional stabilizers. Clinical Relevance Accurate graft morphology may help prevent postoperative osteoarthritis. Grafts differ significantly regarding geometric parameters. The findings of this study will help surgeons select the most appropriate graft for glenoid reconstruction.
Frozen shoulder (FS) is a pathology that is difficult to understand and difficult to manage. Over the last ten years, contradictory and new evidence is provided regarding the recovery and its natural ...course. This narrative review provides new information about the diagnosis and conservative treatment of patients with FS and ongoing research hypotheses that might provide new insights in the pathology and treatment options. FS has a characteristic course. People with Diabetes Mellitus and thyroid disorders have a higher risk of developing a FS. The diagnosis FS is based on pattern recognition and physical examination. Additionally, ‘rule-in’ and ‘rule-out’ criteria can be used to increase the likelihood of the frozen shoulder diagnosis. Recommended and most common physical therapy interventions are mobilization techniques and exercises, in which tissue irritability can guide its intensity. In addition, physical therapy is often complementary with patient education and pharmacotherapy. The latest evidence-based practice related to FS is proprioceptive neuromuscular facilitation and mirror therapy. In addition, interventions like pain neuroscience education, high-intensity interval training and lifestyle changes are still hypothetical. Finally, better insight in the involvement of biochemical processes, function of myofibroblasts and matrix metalloproteinases can provide better understanding in the pathophysiology and will be addressed in current review.
IntroductionThere is a large diversity in the clinical presentation of frozen shoulder (FS) and the clinical outcome is not always satisfactory. The aim of the current study was to examine to what ...extent range of motion (ROM) limitation, metabolic factors (diabetes mellitus and thyroid disorders), autonomic symptoms and pain sensitivity may contribute to the prognosis in terms of shoulder pain and disability and quality of life in patients with FS.MethodsPatients with stage 1 or 2 FS were longitudinally followed-up during 9 months after baseline assessment. They completed six questionnaires and underwent quantitative sensory testing (pressure pain thresholds, temporal summation and conditioned pain modulation) and ROM assessment.ResultsOne hundred and forty-nine patients with FS were initially recruited and 121 completed at least one follow-up measurement. Shoulder pain and disability improved over time and diabetes mellitus was found to be a prognostic factor for final outcome. Several domains of quality of life also improved over time and external rotation ROM, diabetes mellitus, thyroid disorder and autonomic symptoms were found to be prognostic factors for final outcome. These prognostic factors explained 2.5%–6.3% of the final outcome of shoulder pain and disability and quality of life.Discussion and conclusionIn patients with FS, prognostic variables were able to predict different outcomes, indicating that outcomes in this population can be variable-dependent. Other variables not explored in this study might contribute to the prognosis of patients with FS, which should be investigated in future research. In clinical practice, baseline assessment of prognostic factors and focusing on a more holistic approach might be useful to inform healthcare practitioners about progression of patients with FS during a 9-month period.
Background Only a few articles describe the reproducibility and clinical feasibility of glenoid inclination measurements on conventional radiographs, and none of them validated their method in ...shoulder arthroplasty cases. From a clinical point of view, the angle measured between the supraspinatus fossa and the glenoid fossa line (angle β) appears to be the most interesting angle to assess glenoid inclination. This study aimed to validate the angle β in shoulder arthroplasty patients to facilitate the assessment of glenoid component inclination. Materials and methods Seventeen patients who underwent total or reverse shoulder arthroplasty were evaluated. The angle β was measured by 2 independent observers on postoperative radiographs and 3-dimensional (3D) models. The interobserver variability and accuracy of angle β were analyzed by calculating the intraclass correlation coefficient (ICC) and by generating Bland-Altman plots. Results The angle β showed a good interobserver variability (ICC = 0.971 for radiographs, ICC = 0.980 for 3D models) and a good agreement between the radiographic and 3D measurements (ICC = 0.904 for observer 1 and ICC = 0.908 for observer 2). Bland-Altman plots demonstrated that in 95% of the measurements on radiographs, the error will be <10. In the investigated population, 85% showed an error <6. Conclusion This study demonstrates that angle β can be measured on radiographs to assess glenoid component inclination in total and reverse shoulder arthroplasty, but clinicians and researchers should keep in mind that measurement errors of 10° may occur in a minority of cases.
Hypothesis Navigation can improve accuracy of placement of the glenoid component in reversed shoulder arthroplasty. Material and methods A glenoid component of a reversed shoulder prosthesis was ...implanted in 14 paired scapulohumeral cadaver specimens. Seven procedures with standard instrumentation were compared with 7 procedures using navigation. The intraoperative goal was to place the component centrally in the glenoid in the axial plane and 10° inferiorly tilted in the frontal plane. Glenoid component version and tilt and screw placement were studied using CT scan and macroscopic dissection. Results The mean version of the glenoid component in the standard instrumentation group was 8.7° of anteversion, compared with 3.1° of anteversion in the navigated group. The mean tilt of the glenoid component was 0.9° in the standard group and 5.4° of inferior tilt in the navigated group. Using navigation, the range of error for version was 8° (SD 3.3°) compared to 12° (SD 4.1°) in controls. For tilt, the range of error was 8° (SD 3.6°) in navigated specimens and 16° (SD 6.0°) for controls. In the control group, there were no perforations of the central peg, but 1 inferior screw and 4 superior screws were malpositioned. In the navigation group, no central peg perforated, all inferior screws were correctly positioned, and 2 superior screws were malpositioned. Conclusion Computer navigation was more accurate and more precise than standard instrumentation in its placement of the glenoid component in reversed shoulder arthroplasty.