High photoluminescence quantum yield, easily tuned emission colors, and high color purity of perovskite nanocrystals make this class of material attractive for light source or display applications. ...Here, green light-emitting devices (LEDs) were fabricated using inorganic cesium lead halide perovskite nanocrystals as emitters. By introducing a thin film of perfluorinated ionomer (PFI) sandwiched between the hole transporting layer and perovskite emissive layer, the device hole injection efficiency has been significantly enhanced. At the same time, PFI layer suppressed charging of the perovskite nanocrystal emitters thus preserving their superior emissive properties, which led to the three-fold increase in peak brightness reaching 1377 cd m–2. The full width at half-maximum of the symmetric emission peak with color coordinates of (0.09, 0.76) was 18 nm, the narrowest value among perovskite based green LEDs.
Due to their outstanding optoelectronic properties, metal halide perovskites have been intensively studied in recent years. The latest certificated efficiency of 23.3% recently achieved in perovskite ...solar cells (PVSCs) enables them to be used as a very promising candidate for next‐generation photovoltaics. The morphology, defect density, and water resistance of perovskite films have an enormous impact on the performance and stability of PVSCs. Ligands, with coordinating capability, have been widely developed to improve the quality and stability of perovskite materials significantly. In the first section of this review, the role of ligands in fabricating perovskite films by different methods (one‐step, two‐step, and postdeposition treatment) is discussed. In the second section, the progress on ligand‐passivated perovskites via post‐treatment, in situ passivation during perovskite formation, and modifying the substrates before perovskite formation is reviewed. In the third section, a discussion of ligand‐stabilized perovskite films from the perspectives of crystal crosslinking, dimensionality engineering, and interfacial modification is presented. Finally, a summary and an outlook are given.
The role of ligands in perovskite photovoltaics is discussed from the perspective of film formation, passivation, and stability. Ligands can be used to improve the morphology and film quality by modulating the crystallization kinetics of perovskite precursors and passivating the defects via coordinate bonding. Besides, the stability of perovskites can be enhanced by ligand engineering.
Environmental adaptation, predisposition to common diseases, and, potentially, speciation may all be linked through the adaptive potential of mitochondrial DNA (mtDNA) alterations of bioenergetics. ...This Perspective synthesizes evidence that human mtDNA variants may be adaptive or deleterious depending on environmental context and proposes that the accrual of mtDNA variation could contribute to animal speciation via adaptation to marginal environments.
Evidence that mitochondrial DNA mutations have been key not only for human disease, but also for adaptation to new environments is synthesized, and the hypothesis that these mutations may contribute to speciation is put forth.
The classical Mendelian genetic perspective has failed to adequately explain the biology and genetics of common metabolic and degenerative diseases. This is because these diseases are primarily ...systemic bioenergetic diseases, and the most important energy genes are located in the cytoplasmic mitochondrial DNA (mtDNA). Therefore, to understand these "complex" diseases, we must investigate their bioenergetic pathophysiology and consider the genetics of the thousands of copies of maternally inherited mtDNA, the more than 1,000 nuclear DNA (nDNA) bioenergetic genes, and the epigenomic and signal transduction systems that coordinate these dispersed elements of the mitochondrial genome.
Life is the interplay between structure and energy, yet the role of energy deficiency in human disease has been poorly explored by modern medicine. Since the mitochondria use oxidative ...phosphorylation (OXPHOS) to convert dietary calories into usable energy, generating reactive oxygen species (ROS) as a toxic by-product, I hypothesize that mitochondrial dysfunction plays a central role in a wide range of age-related disorders and various forms of cancer. Because mitochondrial DNA (mtDNA) is present in thousands of copies per cell and encodes essential genes for energy production, I propose that the delayed-onset and progressive course of the age-related diseases results from the accumulation of somatic mutations in the mtDNAs of post-mitotic tissues. The tissue-specific manifestations of these diseases may result from the varying energetic roles and needs of the different tissues. The variation in the individual and regional predisposition to degenerative diseases and cancer may result from the interaction of modern dietary caloric intake and ancient mitochondrial genetic polymorphisms. Therefore the mitochondria provide a direct link between our environment and our genes and the mtDNA variants that permitted our forbears to energetically adapt to their ancestral homes are influencing our health today.
The unorthodox genetics of the mtDNA is providing new perspectives on the etiology of the common "complex" diseases. The maternally inherited mtDNA codes for essential energy genes, is present in ...thousands of copies per cell, and has a very high mutation rate. New mtDNA mutations arise among thousands of other mtDNAs. The mechanisms by which these "heteroplasmic" mtDNA mutations come to predominate in the female germline and somatic tissues is poorly understood, but essential for understanding the clinical variability of a range of diseases. Maternal inheritance and heteroplasmy also pose major challengers for the diagnosis and prevention of mtDNA disease.
Recently, metal nanowires have received great research interests due to their potential as next-generation flexible transparent electrodes. While great efforts have been devoted to develop enabling ...nanowire electrodes, reduced contact resistance of the metal nanowires and improved electrical stability under continuous bias operation are key issues for practical applications. Here, we propose and demonstrate an approach through a low-cost, robust, room temperature and room atmosphere process to fabricate a conductive silver nano-network comprising silver nanowires and silver nanoparticles. To be more specific, silver nanoparticles are selectively grown and chemically integrated in situ at the junction where silver nanowires meet. The site-selective growth of silver nanoparticles is achieved by a plasmon-induced chemical reaction using a simple light source at very low optical power density. Compared to silver nanowire electrodes without chemical treatment, we observe tremendous conductivity improvement in our silver nano-networks, while the loss in optical transmission is negligible. Furthermore, the silver nano-networks exhibit superior electrical stability under continuous bias operation compared to silver nanowire electrodes formed by thermal annealing. Interestingly, our silver nano-network is readily peeled off in water, which can be easily transferred to other substrates and devices for versatile applications. We demonstrate the feasibly transferrable silver conductive nano-network as the top electrode in organic solar cells. Consequently, the transparent and conductive silver nano-networks formed by our approach would be an excellent candidate for various applications in optoelectronics and electronics.
There has been rapid progress in solution‐processed organic solar cells (OSCs) and perovskite solar cells (PVSCs) toward low‐cost and high‐throughput photovoltaic technology. Carrier (electron and ...hole) transport layers (CTLs) play a critical role in boosting their efficiency and long‐time stability. Solution‐processed metal oxide nanocrystals (SMONCs) as a promising CTL candidate, featuring robust process conditions, low‐cost, tunable optoelectronic properties, and intrinsic stability, offer unique advantages for realizing cost‐effective, high‐performance, large‐area, and mechanically flexible photovoltaic devices. In this review, the recent development of SMONC‐based CTLs in OSCs and PVSCs is summarized. This paper starts with the discussion of synthesis approaches of SMONCs. Then, a broad range of SMONC‐based CTLs, including hole transport layers and electron transport layers, are reviewed, in which an emphasis is placed on the improvement of the efficiency and device stability. Finally, for the better understanding of the challenges and opportunities on SMONC‐based CTLs, several strategies and perspectives are outlined.
Solution‐processed metal oxide nanocrystals present unique properties as efficient carrier transport layers in photovoltaic devices. In this review, solution‐processed metal oxide nanocrystal‐based carrier transport layers in organic solar cells and perovskite solar cells, and their low‐temperature solution‐processed synthesis approaches are summarized.
Two of the recent major research topics in optoelectronic devices are discussed: the development of new organic materials (both molecular and polymeric) for the active layer of organic optoelectronic ...devices (particularly organic light‐emitting diodes (OLEDs)), and light management, including light extraction for OLEDs and light trapping for organic solar cells (OSCs). In the first section, recent developments of phosphorescent transition metal complexes for OLEDs in the past 3–4 years are reviewed. The discussion is focused on the development of metal complexes based on iridium, platinum, and a few other transition metals. In the second part, different light‐management strategies in the design of OLEDs with improved light extraction, and of OSCs with improved light trapping is discussed.
The recent development of phosphorescent transition metal complexes for the fabrication of highly efficient and multicolored organic light‐emitting devices and the use of novel light‐management techniques to enhance the efficiency of light‐emitting and solar‐light‐harvesting devices are discussed.
Solar cells incorporating lead halide-based perovskite absorbers can exhibit impressive power conversion efficiencies (PCEs), recently surpassing 15%. Despite rapid developments, achieving precise ...control over the morphologies of the perovskite films (minimizing pore formation) and enhanced stability and reproducibility of the devices remain challenging, both of which are necessary for further advancements. Here we demonstrate vacuum-assisted thermal annealing as an effective means for controlling the composition and morphology of the CH3NH3PbI3 films formed from the precursors of PbCl2 and CH3NH3I. We identify the critical role played by the byproduct of CH3NH3Cl on the formation and the photovoltaic performance of the perovskite film. By completely removing the byproduct through our vacuum-assisted thermal annealing approach, we are able to produce pure, pore-free planar CH3NH3PbI3 films with high PCE reaching 14.5% in solar cell device. Importantly, the removal of CH3NH3Cl significantly improves the device stability and reproducibility with a standard deviation of only 0.92% in PCE as well as strongly reducing the photocurrent hysteresis.