Quasi-two-dimensional (quasi-2D) perovskites have attracted extraordinary attention due to their superior semiconducting properties and have emerged as one of the most promising materials for ...next-generation light-emitting diodes (LEDs). The outstanding optical properties originate from their structural characteristics. In particular, the inherent quantum-well structure endows them with a large exciton binding energy due to the strong dielectric- and quantum-confinement effects; the corresponding energy transfer among different n-value species thus results in high photoluminescence quantum yields (PLQYs), particularly at low excitation intensities. The review herein presents an overview of the inherent properties of quasi-2D perovskite materials, the corresponding energy transfer and spectral tunability methodologies for thin films, as well as their application in high-performance LEDs. We then summarize the challenges and potential research directions towards developing high-performance and stable quasi-2D PeLEDs. The review thus provides a systematic and timely summary for the community to deepen the understanding of quasi-2D perovskite materials and resulting LED devices.
Efficient ultra-broadband emitter is realized by using lanthanide ion doping coupled with "DPs-in-glass composite" (DiG) structure. The synergy of self-trapped exciton together with the energy ...transition induce this ultra-broadband emission emerge.
Rapid Auger recombination represents an important challenge faced by quasi-2D perovskites, which induces resulting perovskite light-emitting diodes' (PeLEDs) efficiency roll-off. In principle, Auger ...recombination rate is proportional to materials' exciton binding energy (E
). Thus, Auger recombination can be suppressed by reducing the corresponding materials' E
. Here, a polar molecule, p-fluorophenethylammonium, is employed to generate quasi-2D perovskites with reduced E
. Recombination kinetics reveal the Auger recombination rate does decrease to one-order-of magnitude lower compared to its PEA
analogues. After effective passivation, nonradiative recombination is greatly suppressed, which enables resulting films to exhibit outstanding photoluminescence quantum yields in a broad range of excitation density. We herein demonstrate the very efficient PeLEDs with a peak external quantum efficiency of 20.36%. More importantly, devices exhibit a record luminance of 82,480 cd m
due to the suppressed efficiency roll-off, which represent one of the brightest visible PeLEDs yet.
Reduced-dimensional (quasi-2D) perovskite materials are widely applied for perovskite photovoltaics due to their remarkable environmental stability. However, their device performance still lags far ...behind traditional three dimensional perovskites, particularly high open circuit voltage (V
) loss. Here, inhomogeneous energy landscape is pointed out to be the sole reason, which introduces extra energy loss, creates band tail states and inhibits minority carrier transport. We thus propose to form homogeneous energy landscape to overcome the problem. A synergistic approach is conceived, by taking advantage of material structure and crystallization kinetic engineering. Accordingly, with the help of density functional theory guided material design, (aminomethyl) piperidinium quasi-2D perovskites are selected. The lowest energy distribution and homogeneous energy landscape are achieved through carefully regulating their crystallization kinetics. We conclude that homogeneous energy landscape significantly reduces the Shockley-Read-Hall recombination and suppresses the quasi-Fermi level splitting, which is crucial to achieve high V
.
Serious performance decline arose for perovskite light-emitting diodes (PeLEDs) once the active area was enlarged. Here we investigate the failure mechanism of the widespread active film fabrication ...method; and ascribe severe phase-segregation to be the reason. We thereby introduce L-Norvaline to construct a COO
-coordinated intermediate phase with low formation enthalpy. The new intermediate phase changes the crystallization pathway, thereby suppressing the phase-segregation. Accordingly, high-quality large-area quasi-2D films with desirable properties are obtained. Based on this, we further rationally adjusted films' recombination kinetics. We reported a series of highly-efficient green quasi-2D PeLEDs with active areas of 9.0 cm
. The peak EQE of 16.4% is achieved in <n > = 3, represent the most efficient large-area PeLEDs yet. Meanwhile, high brightness device with luminance up to 9.1 × 10
cd m
has achieved in = 10 film.
Quasi-two-dimensional (quasi-2D) Ruddlesden-Popper (RP) perovskites such as BA
Cs
Pb
Br
(BA = butylammonium, n > 1) are promising emitters, but their electroluminescence performance is limited by a ...severe non-radiative recombination during the energy transfer process. Here, we make use of methanesulfonate (MeS) that can interact with the spacer BA cations via strong hydrogen bonding interaction to reconstruct the quasi-2D perovskite structure, which increases the energy acceptor-to-donor ratio and enhances the energy transfer in perovskite films, thus improving the light emission efficiency. MeS additives also lower the defect density in RP perovskites, which is due to the elimination of uncoordinated Pb
by the electron-rich Lewis base MeS and the weakened adsorbate blocking effect. As a result, green light-emitting diodes fabricated using these quasi-2D RP perovskite films reach current efficiency of 63 cd A
and 20.5% external quantum efficiency, which are the best reported performance for devices based on quasi-2D perovskites so far.
Device performance and in particular device stability for blue perovskite light-emitting diodes (PeLEDs) remain considerable challenges for the whole community. In this manuscript, we conceive an ...approach by tuning the 'A-site' cation composition of perovskites to develop blue-emitters. We herein report a Rubidium-Cesium alloyed, quasi-two-dimensional perovskite and demonstrate its great potential for pure-blue PeLED applications. Composition engineering and in-situ passivation are conducted to further improve the material's emission property and stabilities. Consequently, we get a prominent film photoluminescence quantum yield of around 82% under low excitation density. Encouraged by these findings, we finally achieve a spectra-stable blue PeLED with the peak external quantum efficiency of 1.35% and a half-lifetime of 14.5 min, representing the most efficient and stable pure-blue PeLEDs reported so far. The strategy is also demonstrated to be able to generate efficient perovskite blue emitters and PeLEDs in the whole blue spectral region (from 454 to 492 nm).
Lead halide perovskite nanocrystals (PeNCs) are promising materials for applications in optoelectronics. However, their environmental instability remains to be addressed to enable their advancement ...into industry. Here the development of a novel synthesis method is reported for monodispersed PeNCs coated with all inorganic shell of cesium lead bromide (CsPbBr3) grown epitaxially on the surface of formamidinium lead bromide (FAPbBr3) NCs. The formed FAPbBr3/CsPbBr3 NCs have photoluminescence in the visible range 460–560 nm with narrow emission linewidth (20 nm) and high optical quantum yield, photoluminescence quantum yield (PLQY) up to 93%. The core/shell perovskites have enhanced optical stability under ambient conditions (70 d) and under ultraviolet radiation (50 h). The enhanced properties are attributed to overgrowth of FAPbBr3 with all‐inorganic CsPbBr3 shell, which acts as a protective layer and enables effective passivation of the surface defects. The use of these green‐emitting core/shell FAPbBr3/CsPbBr3 NCs is demonstrated in light‐emitting diodes (LEDs) and significant enhancement of their performance is achieved compared to core only FAPbBr3‐LEDs. The maximum current efficiency observed in core/shell NC LED is 19.75 cd A‐1 and the external quantum efficiency of 8.1%, which are approximately four times and approximately eight times higher, respectively, compared to core‐only devices.
Perovskite core/shell nanocrystals, formamidinium lead bromide/cesium lead bromide (FAPbBr3/CsPbBr3), are synthesized with an all‐inorganic shell and have photoluminescence‐enhanced optical stability compared to FAPbBr3 perovskites. The FAPbBr3/CsPbBr3 retains an optical quantum yield of ≈ 80% over at least 70 d of exposure to ambient conditions and under long‐term exposure to the ultraviolet radiation (50 h). These nanocrystals are used in light‐emitting diode devices with enhanced performance.
Chiral quasi‐2D perovskite single crystals (SCs) were investigated for their circular polarized light (CPL) detecting capability. Quasi‐2D chiral perovskites, (R)‐β‐MPA2MAPb2I7 ...((R)‐β‐MPA=(R)‐(+)‐β‐methylphenethylamine, MA=methylammonium), have intrinsic chirality and the capability to distinguish different polarization states of CPL photons. Corresponding quasi‐2D SCs CPL photodetector exhibit excellent detection performance. In particular, our device responsivity is almost one order of magnitude higher than the reported 2D perovskite CPL detectors to date. The crystallization dynamics of the film were modulated to facilitate its carrier transport. Parallel oriented perovskite films with a homogeneous energy landscape is crucial to maximize the carrier collection efficiency. The photodetector also exhibits superior mechanical flexibility and durability, representing a promising candidate for sensitive and robust CPL photodetectors.
Chiral quasi‐2D perovskites possess intrinsic chirality and thus exhibit circular polarized light (CPL) detection capability. A flexible chiral quasi‐2D perovskite thin‐film photodetector, which exhibits excellent CPL detection efficiency and durability, is presented that is a promising candidate for sensitive and robust CPL photodetectors.
Tin‐based perovskites have exhibited high potential for efficient photovoltaics application due to their outstanding optoelectrical properties. However, the extremely undesired instabilities ...significantly hinders their development and further commercialization process. A novel tin‐based reduced‐dimensional (quasi‐2D) perovskites is reported here by using 5‐ammoniumvaleric acid (5‐AVA+) as the organic spacer. It is demonstrated that by introducing appropriate amount of ammonium chloride (NH4Cl) as additive, highly vertically oriented tin‐based quasi‐2D perovskite films are obtained, which is proved through the grazing incidence wide‐angle X‐ray scattering characterization. In particular, this approach is confirmed to be a universal method to deliver highly vertically oriented tin‐based quasi‐2D perovskites with various spacers. The highly ordered vertically oriented perovskite films significantly improve the charge collection efficiency between two electrodes. With the optimized NH4Cl concentration, the solar cells employing quasi‐2D perovskite, AVA2FAn−1SnnI3n+1 ( = 5), as light absorbers deliver a power conversion efficiency up to 8.71%. The work paves the way for further employing highly vertically oriented tin‐based quasi‐2D perovskite films for highly efficient and stable photovoltaics.
A NH4Cl additive is introduced in the preparation of AVA2FAn−1SnnI3n+1 ( = 5) perovskite, leading to highly vertically oriented tin‐based reduced‐dimensional perovskite films with enhanced efficiency and stability. Herein, under the effects of NH4Cl additive, the optimized power conversion efficiency of tin‐based quasi‐2D perovskite solar cells increases from 4.19% to 8.71% with enhanced stability.