Ferroelectric materials have a spontaneous electric polarization that can be manipulated for applications. The polarization is usually not uniform throughout the material, and for nanosized ...ferroelectrics, polarization can be quite complex. Using scanning transmission electron microscopy, Tang et al. found that in thin films of the ferroelectric PbTiO3, the polarization vector rotated in space, forming a closed loop, the so-called flux closure. The flux closure structures formed an array, with the period dependent on the width of the thin film, and caused the buildup of considerable strain within the crystal lattice of the material Science, this issue p. 547 Nanoscale ferroelectrics are expected to exhibit various exotic domain configurations, such as the full flux-closure pattern that is well known in ferromagnetic materials. Here we observe not only the atomic morphology of the flux-closure quadrant but also a periodic array of flux closures in ferroelectric PbTiO3 films, mediated by tensile strain on a GdScO3 substrate. Using aberration-corrected scanning transmission electron microscopy, we directly visualize an alternating array of clockwise and counterclockwise flux closures, whose periodicity depends on the PbTiO3 film thickness. In the vicinity of the core, the strain is sufficient to rupture the lattice, with strain gradients up to 109 per meter. Engineering strain at the nanoscale may facilitate the development of nanoscale ferroelectric devices.
Although elastic strains, particularly inhomogeneous strains, are able to tune, enhance or create novel properties of some nanoscale functional materials, potential devices dominated by inhomogeneous ...strains have not been achieved so far. Here we report a fabrication of inhomogeneous strains with a linear gradient as giant as 10
per metre, featuring an extremely lower elastic energy cost compared with a uniformly strained state. The present strain gradient, resulting from the disclinations in the BiFeO
nanostructures array grown on LaAlO
substrates via a high deposition flux, induces a polarization of several microcoulomb per square centimetre. It leads to a large built-in electric field of several megavoltage per metre, and gives rise to a large enhancement of solar absorption. Our results indicate that it is possible to build up large-scale strain-dominated nanostructures with exotic properties, which in turn could be useful in the development of novel devices for electromechanical and photoelectric applications.
Dysbiotic oral microbiota has been associated with multiple sclerosis. However, the role and mechanism of oral microbiota in the development of multiple sclerosis are still elusive. Here, we ...demonstrated that ligature-induced periodontitis (LIP) aggravated experimental autoimmune encephalomyelitis (EAE) in mice, and this was likely dependent on the expansion of T helper 17 (Th17) cells. LIP increased the splenic richness of Enterobacter sp., which was able to induce the expansion of splenic Th17 cells and aggravate EAE in mice. LIP also led to enrichment of Erysipelotrichaceae sp. in the gut and increased Th17 cells in the large intestinal lamina propria of EAE mice. Fecal microbiota transplantation from EAE mice with LIP also promoted EAE symptoms. In conclusion, periodontitis exacerbates EAE, likely through ectopic colonization of oral pathobionts and expansion of Th17 cells.
Background
Sarcopenia is an age-related disease, which is characterized by a decline in muscle mass and function. It is one of the most important health issues in the elderly and often leads to a ...high rate and variety of adverse outcomes.
Objectives
To evaluate the screening accuracy of SARC-F for sarcopenia in the elderly.
Design
We conducted a meta-analysis using articles available in 6 databases including PubMed (Medline), Web of Science, Embase, Cochrane Controlled Register of Trials (CENTRAL), China Knowledge Resource Integrated Database (CNKI), and Wanfang databases from inception to May 2020. Participants: Adults aged 60 years and older.
Measurements
Sarcopenia was defined by EWGSOP2, EWGSOP, AWGS, FNIH and IWGS. Two authors independently extracted data based on predefined criteria. Where data were available we calculated pooled summary estimates of sensitivity, specificity, positive likelihood ratio (PLR), negative likelihood ratio (NLR), diagnostic odds ratio (DOR) and their 95% confidence interval (CI) based on different criteria using the hierarchical logistic regression modeling including bivariate modeling and hierarchical summary receiver operating characteristic (HSROC) modeling.
Results
We included 20 studies, with the prevalence of sarcopenia ranging from 6.42% to 21.56%. The number of the literatures using EWGSOP, EWGSOP2, AWGS, IWGS and FNIH as diagnostic criteria was 13, 4, 13, 8, 7, respectively. Bivariate analysis yielded a pooled sensitivity of 32% (95%CI: 19%–47%), 77% (95%CI: 49%–92%), 27% (95%CI: 16%–42%), 39% (95%CI: 27%–52%), 35% (95%CI: 23%–49%) and a pooled specificity of 86% (95%CI:77%–92%), 63% (95%CI: 43%–79%), 91% (95%CI: 85%–95%), 86% (95%CI: 76%–92%), 89% (95%CI: 81%–93%), respectively. The area under the HSROC curve were 0.68 (95%CI: 0.64–0.72), 0.75 (95%CI: 0.71–0.78), 0.73 (95%CI: 0.69–0.77), 0.67 (95%CI: 0.62–0.71), 0.70 (95%CI: 0.65–0.73), respectively.
Conclusions
The screening accuracy of SARC-F was various based on different diagnostic criteria. There were some limitations for SARC-F, however, considering the higher practicability and specificity for screening sarcopenia in practice, SARC-F was still an effective screening tool for sarcopenia in the elderly. And the screening accuracy of SARC-F needs further exploration when EWGSOP2 is applied as diagnostic criteria and geriatric inpatients are the target participants.
Composite structures made of 2 mm-thick titanium and 10 mm-thick carbon steel are widely used in infrastructures such as long-distance gas transportation. However, cracking, which is caused by ...intermetallic compounds (ICs), is a dominate failure mode in welds of this structure. Thus, a common way to improve the in-service life of is reduce the number of ICs. In this paper, we employ a novel hybrid welding method to fabricate composite structures of TA
titanium and Q235 carbon steel. Specifically, Ti and carbon steel is welded by laser and double Cold Metal Transfer (CMT) welding, respectively. The microstructure near the interface of Ti and steel is then examined using SEM, EBSD, EDS, with emphasis on the ICs in terms of chemical elements and morphologies. Results show that FeTi and Fe
Ti are the main ICs near the interface, and responsible for the failure of the welds. The effect of welding heat input on the formation of ICs is investigated as well. Results show that ICs are smaller when the heat input is low. Under low heat input circumstance, the tensile strength of the weld can reach up to 420 MPa.
Abstract
Noting the weakest modulation and relatively high metal abundance of the ab-type RR Lyrae star V838 Cyg, we collected the photometric data of this star from several sky surveys to carry out ...an in-depth analysis. The
O
−
C
diagram shows that the pulsation period of V838 Cyg increases linearly over a long timescale. In a reanalysis of the high-precision Kepler data, we confirmed the modulation with a period of 59.45 ± 0.07 days found by Benkő et al., and also found an additional weak modulation with a longer period (840 ± 21 days). After a series of analyses, we incline to the view that the mechanisms causing the two modulations are different: the former is more similar to the typical Blazhko effect, while the mechanism leading to the latter may be an extrinsic factor. We also collected and compared the modulation and physical parameters of other Blazhko RR Lyrae stars from several works in the literature, and find that there is a potential negative correlation between the modulation amplitude (or upper limit of amplitude) and the metal abundance. We infer that the relatively high metal abundance will promote convection in the outer stellar atmosphere, and then inhibit those factors (turbulence, shock wave, etc.) that may cause Blazhko modulation. Future observations and research work can be carried out with reference to this viewpoint. We also introduce the moiré effects that appear in the Kepler long-cadence light curves and their possible interference in the previous analyses.
PDF
