Radomes protecting sensitive radar, navigational, and communications equipment of, e.g., aircraft, are strongly exposed to the environment and have to withstand harsh weather conditions and potential ...impacts. Besides their significance to the structural integrity of the radomes, it is often crucial to optimize the composite structures for best possible radio performance. Hence, there exists a significant interest in non-destructive testing techniques, which can be used for defect inspection of radomes in field use as well as for quality inspection during the manufacturing process. Contactless millimeter-wave and terahertz imaging techniques provide millimeter resolution and have the potential to address both application scenarios. We report on our development of a three-dimensional (3D) terahertz imaging system for radome inspection during industrial manufacturing processes. The system was designed for operation within a machining center for radome manufacturing. It simultaneously gathers terahertz depth information in adjacent frequency ranges, from 70 to 110 GHz and from 110 to 170 GHz by combining two frequency modulated continuous-wave terahertz sensing units into a single measurement device. Results from spiraliform image acquisition of a radome test sample demonstrate the successful integration of the measurement system.
Terahertz tomography is a promising method among non-destructive inspection techniques to detect faults and defects in dielectric samples. Recently, image quality was improved significantly through ...the incorporation of
information and off-axis data. However, this improvement has come at the cost of increased measurement time. To aim toward industrial applications, it is therefore necessary to speed up the measurement by parallelizing the data acquisition employing multi-channel setups. In this work, we present two tomographic frequency-modulated continuous wave (FMCW) systems working at a bandwidth of 230-320 GHz, equipped with an eight-channel detector array, and we compare their imaging results with those of a single-pixel setup. While in the first system the additional channels are used exclusively to detect radiation refracted by the sample, the second system features an f-θ lens, focusing the beam at different positions on its flat focal plane, and thus utilizing the whole detector array directly. The usage of the f-θ lens in combination with a scanning mirror eliminates the necessity of the formerly used slow translation of a single-pixel transmitter. This opens up the potential for a significant increase in acquisition speed, in our case by a factor of four to five, respectively.
Terahertz tomography is a non-contact inspection technique to image objects from multiple angles and reconstruct their 3D volume from intensity and time-of-flight transmission data, without the need ...for radiation protection measures. Unlike X-rays, terahertz radiation is subject to strong diffraction and refraction when propagating through dielectric materials, which often deteriorate the image reconstruction quality. Our solution to this problem applies ray tracing, considering the beam shape and an a priori model of the sample under investigation to predict the beam paths of the terahertz radiation. We present two reconstruction methods based on the resulting beam path predictions yielding higher image quality. Method 1 filters out beams deviating strongly, thus removing induced artifacts and errors from the reconstruction image. Method 2 employs off-axis measurements that acquire data along the full detection plane and in this way detect even strongly deflected beams. Considering these beams and the information they carry in the reconstruction enhances the image quality. Applying these methods to terahertz tomography, even complicated structures can be imaged. We display the significant enhancements achieved with the two methods by comparing the reconstruction results of different polymeric samples.
In this work we report on the application of the conjugate gradient least squares (CGLS) algorithm in terahertz tomography. The algorithm outperforms most established reconstruction techniques, ...especially the widely used filtered back projection (FBP). The performance of the algorithms is tested with simulated projection data as well as measured data from a frequency-modulated continuous-wave transmission tomography setup operating from 230 to 320 GHz. A 2D image of a test scene is reconstructed. This algorithm promises great improvement for the application of terahertz tomography in the field of non-destructive testing.
PDF
