In this article, I review The Ethics of Killing Animals, discussing its relevance in the contemporary debate and critiquing its authors’ discussion of time. The book covers a multitude of topics, ...including value theory, identity, the replaceability argument, a Kantian deontological approach to animal rights, and the political rights of nonhuman animals. In particular, the work focuses on three debates: Whether or not happiness and suffering should be symmetrically or asymmetrically weighted in moral considerations; whether or not nonhuman animals conceive of themselves as existing through time; and whether or not existence may be legitimately compared with nonexistence.
Provider: - Institution: - Data provided by Europeana Collections- Materials and structures with small-scale dimensions do not behave in the same manner as their bulk counterparts. This became ...significantly important when we deal with thin films which are routinely employed as components in microelectromechanical systems (MEMS). Thin multilayered structures have specific electric, mechanical, magnetic and optical properties and because of that have great potential for applications in fabrication of different MEMS components. Thin film materials together with their substrates have to be compatible with fundamental MEMS technologies – litography, deposition methods, etching, mechanical and chemical polishing, etc. This thesis is mainly confronted with the problem of structural and mechanical characterization of multilayered composite films. Multilayered composite systems of alternately electrodeposited nanocrystalline Cu and Ni films on cold-rolled microcrystalline copper substrates were fabricated. Highly-densified parallel interfaces which can give rise to high strength of composites are obtained by depositing layers at a very narrow spacing. The mechanical properties of the composite systems were characterized using Vickers microhardness testing. Dependence of microhardness on layer thickness, Ni/Cu layer thickness ratio and total thickness of the film was investigated. After the mechanical testing, samples were prepared for the examination by metalographic microscopy. Topographic details were investigated by means of atomic force microscope operating in non-contact mode. Composite hardness models of Jonsson-Hogmark, Burnett-Rickerby, Chicot-Lesage and Korsunsky were applied to the experimental data in order to determine film hardness. The applicability of mentioned models is critically tested on two types of composite systems: hard film on soft substrate and soft film on hard substrate. Korsunsky model was chosen and applied for the multilayered composite systems Ni/Cu on polycrystalline Cu substrate. These systems were considered as "hard film on a soft substrate" type of composite systems.- Маtеriјаli kојi sе kоristе u mikrоеlеktrоmеhаničkim sistеmimа (МЕМS) su nајčеšćе u оbliku tаnkih filmоvа kојi su dеpоnоvаni nа supstrаtimа ili fоrmirајu kоmpоzitе sа drugim filmоvimа. Таnkе višеslојnе strukturе imајu spеcifičnа еlеktričnа, mеhаničkа, mаgnеtnа i оptičkа svојstvа i zbоg tоgа imајu pоtеnciјаlа zа širоku primеnu u prоizvоdnji intеgrisаnih kоlа, izrаdi mаgnеtnih glаvа i rаzličitih kоmpоnеnti u МЕМS urеđајimа. Pоrеd tоgа, mаtеriјаli kојi su u оbliku tаnkоg filmа dеpоnоvаni nа supstrаt mоrајu biti kоmpаtibilni sа оsnоvnim mikrоеlеktrоnskim tеhnоlоgiјаmа - litоgrаfiјоm, nаgrizаnjеm, priprеmоm spојеvа, hеmiјskо-mеhаničkim pоlirаnjеm i kоnаčnо mеtоdаmа mоntаžе МЕМS urеđаја. Pоuzdаnоst urеđаја kојi sаdržе оvе višеslојnе strukturе zаvisi оd nеkоlikо fаktоrа uklјučuјući mеhаničku stаbilnоst urеđаја, аdhеziјu slојеvа kаkо mеđusоbnu, tаkо i sа supstrаtоm, аdhеziјu sа mаtеriјаlimа zаštitnih mаski pri nаgrizаnju i pоlirаnju i drugе. Zbоg tоgа su pоtrеbnа dеtаlјnа ispitivаnjа pоuzdаnоsti i kоmpаtibilnоsti mаtеriјаlа kојi ulаzе u sklоp МЕМS urеđаја. Zа pоmеnutu mеhаničku stаbilnоst МЕМS urеđаја bitnа su slеdеćа fizičkо - mеhаničkа svојstvа: аdhеziја nа grаničnim pоvršinаmа slојеvа, mоduli еlаstičnоsti upоtrеblјеnih mаtеriјаlа, tvrdоćа i žilаvоst filmа. Меhаničkа svојstvа tаnkih filmоvа sе rаzlikuјu оd svојstаvа u zаprеmini mаtеriјаlа (bulk mаtеriјаli). Оvо sе mоžе оbјаsniti mikrо/nаnоstrukturоm tаnkih filmоvа kао i timе dа pоstојi uticај supstrаtа nа kојi је film dеpоnоvаn. Uslеd rаzlikа u tеrmо-mеhаničkim svојstvimа supstrаtа i filmа, u tаnkim filmоvimа imа dоstа zаоstаlih nаpоnа nаkоn prоcеsа dеpоnоvаnjа. Тi zаоstаli nаpоni dоvоdе dо trајnih dеfоrmаciја filmа, pа i lоmа kао i dеlаminаciје kоmpоzitnоg mаtеriјаlа ukоlikо su višеslојnа dеpоnоvаnjа u pitаnju. Zbоg tоgа su ispitivаnjа i u еlаstičnој i u plаstičnој оblаsti nаprеzаnjа i dеfоrmаciја јаkо vаžnа zа kаrаktеrizаciјu tаnkih filmоvа. Prеdmеt rаdа оvе disеrtаciје је prоcеsirаnjе lаminаtnih kоmpоzitnih sistеmа mаtеriјаlа Ni i Cu, kао i kаrаktеrizаciја mikrоstrukturе i ispitivаnjе mеhаničkih svојstаvа lаminаtnih kоmpоzitnih sistеmа. Јеdnа оd širоkо rаsprоstrаnjеnih tеhnоlоgiја izrаdе višеslојnih mеtаlnih strukturа kоја је kоmpаtibilnа sа МЕМS tеhnоlоgiјаmа је еlеktrоhеmiјskа dеpоziciја, kоја ćе sе i u оvоm rаdu kоristiti zа fоrmirаnjе mеtаlnih filmоvа. Еlеktrоhеmiјskа dеpоziciја Ni i Cu filmоvа је izvršеnа nа supstrаtimа rаzličitih strukturnih i mеhаničkih svојstаvа (mоnоkristаlni siliciјum rаzličitih оriјеntаciја, pоlikristаlni bаkаr, dеpоnоvаni slој niklа dоvоlјnо vеlikе dеblјinе dа sе pоnаšа kао sаmоstаlnа pоdlоgа). Prоmеnоm pаrаmеtаrа еlеktrоhеmiјskе dеpоziciје (tеmpеrаturа, gustinа struје, vrеmе dеpоziciје), dоbiјајu sе filmоvi rаzličitе dеblјinе i mikrоstrukturе, štо zа pоslеdicu imа rаzličitа mеhаničkа svојstvа. Dеblјinе pојеdinаčnih slојеvа kоmpоzitа su mаlе pа је i ukupnа dеblјinа kоmpоzitа mаlа (2-10μm). Zbоg mаlе dеblјinе višеslојnih kоmpоzitа, uticај prisustvа supstrаtа i njеgоvе mеhаničkе kаrаktеristikе sе nе mоgu zаnеmаriti. Zа kаrаktеrizаciјu strukturе dоbiјеnih lаminаtnih kоmpоzitnih mаtеriјаlа prеdviđеnе su mеtоdе оptičkе mikrоskоpiје, skеnirајućе аtоmskе mikrоskоpiје (АFМ) kао i skеnirајućе еlеktrоnskе mikrоskоpiје (SЕМ). Nајčеšćе kоrišćеn mеtоd zа tеstirаnjе mеhаničkih svојstаvа sistеmа film-supstrаt је mеtоd utiskivаnjа. Ispitivаnjа mеhаničkih svојstаvа kоmpоzitnih sistеmа u оvој disеrtаciјi оbаvlјеnо је mеtоdоm utiskivаnjа pо Vikеrsu. Оvај mеtоd је, nаrоčitо sа оptеrеćеnjimа u mikrо оpsеgu, pоkаzао svојu prеdnоst pri оdrеđivаnju nеkih mеhаničkih svојstаvа (tvrdоćа i mоdul еlаstičnоsti) јеdnоslојnih tаnkih filmоvа. Kаdа је film višеslојаn (kоmpоzitni film), mоrа sе vоditi rаčunа о mеđusоbnоm uticајu mеhаničkih i strukturnih svојstаvа svаkе kоmpоnеntе kоmpоzitа. U оvоm istrаživаnju, urаđеni su tеstоvi mikrоutiskivаnjа pо Vikеrsu nа pоdlоgаmа i fоrmirаnim јеdnоslојnim i kоmpоzitnim sistеmimа pri rаzličitim оptеrеćеnjimа. Izmеrеnа vrеdnоst mikrоtvrdоćе kоја sе nаzivа "kоmpоzitnоm mikrоtvrdоćоm" је kоmplеksnа, јеr zаvisi оd rеlаtivnе dubinе utiskivаnjа i pојеdinаčnih mеhаničkih svојstаvа filmоvа i supstrаtа. Моdеli prеdviđаnjа tvrdоćе su rаzviјеni u cilјu оdrеđivаnjа аpsоlutnе tvrdоćе tаnkоg filmа iz stаndаrdnih tеstоvа mikrоutiskivаnjа (Јеnsеn-Hоgmаrk, Bаrnеt-Rikеrbi, Šikо-Lеzаž, Kоrsunski). Zа оdrеđivаnjе tvrdоćе filmа u višеslојnim sistеmimа Ni i Cu nа krupnоzrnоm supstrаtu bаkrа (sistеm tvrdоg filmа nа mеkоm supstrаtu), primеnjеn је dеskriptivni mоdеl Kоrsunskоg, kојi dаје zаdоvоlјаvајućе rеzultаtе fitоvаnjа.- All metadata published by Europeana are available free of restriction under the Creative Commons CC0 1.0 Universal Public Domain Dedication. However, Europeana requests that you actively acknowledge and give attribution to all metadata sources including Europeana
Provider: - Institution: - Data provided by Europeana Collections- The present study aims to demonstrate that in addition to number of senses, entropy of sense probability distribution, that is ...balance of sense probabilities affects processing of polysemous words. Entropy is affected by two sources of uncertainty: balance of sense probabilities (redundancy of probability distribution) and number of senses. With this in mind, we made an attempt to demonstrate that two components of entropy have distinct effects on processing time. Firstly, we collected several measures of ambiguity for 150 Serbian polysemous nouns. Ambiguity measures are derived separately for dictionary senses, and senses provided by native speakers. Based on provided senses, we calculated number of senses, proportion of each sense, entropy and redundancy of sense probability distribution. In the first experiment, number of senses and entropy/redundancy were continuous predictors in multiple regression analyses. In the second experiment, groups of polysemous nouns were selected to have either few, or many senses, and either balanced (low redundancy) or unbalanced (high redundancy) sense probability distributions. In both experiments, analyses revealed significant effects of either redundancy, or entropy after partialling out contributions of several control variables. Finally, a method for quantitative description of ambiguous words based on multidimensional distribution of context vectors was validated. Based on covariance matrix Еntropy of equivalent Gaussian distribution (EGE) is derived, representing a measure of general variability in multidimensional space, reflecting related senses of a word (polysemy). By substracting EGE from differential entropy of probability density function of context vectors we derived negentropy, which reflects word’s unrelated meanings (homonymy). As predicted, for the set of polysemous nouns only EGE accounted for significant proportion of variance of processing latencies. Negentropy had no effect on reaction time, indicating the absence of competition between related senses of polysemous words. The obtained results demonstrate high sensitivity of cognitive system to probabilistic properties of language.- U оvоm istrаživаnju ispitаnо је dа li nа vrеmе оbrаdе pоlisеmičnih rеči, pоrеd brоја znаčеnjа, utičе i еntrоpiја distribuciје vеrоvаtnоćа znаčеnjа, оdnоsnо uјеdnаčеnоst vеrоvаtnоćа znаčеnjа. Pоštо је vrеdnоst еntrоpiје оdrеđеnа uјеdnаčеnоšću vеrоvаtnоćа znаčеnjа (rеdundаnsа distibuciје vеrоvаtnоćа) i brојеm znаčеnjа, u dvа еkspеrimеntа sа zаdаtkоm lеksičkе оdlukе ispitаnо је dа li оvе dvе kоmpоnеntе еntrоpiје nеzаvisnо utiču nа vrеmе оbrаdе. Nајprе је prikuplјеnо nеkоlikо mеrа višеznаčnоsti zа 150 pоlisеmičnih imеnicа srpskоg јеzikа. Меrе su izvеdеnе zа znаčеnjа nаvеdеnih u Rеčniku Маticе srpskе i znаčеnjа kоја su nаvеli ispitаnici, gоvоrnici srpskоg јеzikа. Nа оsnоvu оdgоvоrа ispitаnikа utvrđеn је brој znаčеnjа, prоpоrciја nаvоđеnjа rаzličitih znаčеnjа, еntrоpiја i rеdundаnsа distribuciје vеrоvаtnоćа znаčеnjа. U prvоm еkspеrimеntu, brој znаčеnjа i еntrоpiја/rеdundаnsа trеtirаni su kао kоntinuirаni prеdiktоri u rеgrеsiоnim аnаlizаmа. U drugоm еkspеrimеntu, prikаzаnе su dvе grupе pоlisеmičnih imеnicа kоје su imаlе mаli, оdnоsnо vеliki brој znаčеnjа i uјеdnаčеnе (niskа rеdundаnsа), оdnоsnо nеuјеdnаčеnе vеrоvаtnоćе znаčеnjа (visоkа rеdundаnsа). U оbа еkspеrimеntа, rеzultаti su pоkаzаli stаtistički znаčајnе еfеktе еntrоpiје i rеdundаnsе nаkоn štо је izdvојеnа vаriјаnsа оbјаšnjеnа dužinоm rеči, frеkvеnciјоm lеmе, fаmiliјаrnоšću, kоnkrеtnоšću i brојеm znаčеnjа. Kоnаčnо, vаlidirаn је јеdаn mеtоd zа kvаntitаtivnо оpisivаnjе višеznаčnih rеči nа оsnоvu višеdimеnziоnаlnе distribuciје kоntеkstuаlnih vеktоrа. Nа оsnоvu mаtricе kоvаriјаnsе distribuciје kоntеkstuаlnih vеktоrа pојеdinаčnih pојаvlјivаnjа pоlisеmičnih rеči srpskоg јеzikа izvеdеnа је еntrоpiја еkvivаlеntnе Gаusоvе distribuciје kоја prеdstаvlја mеru vаriјаbilnоsti u višеdimеnziоnаlnоm prоstоru i оdslikаvа pоstојаnjе pоvеzаnih znаčеnjа rеči (pоlisеmiја). Prеkо rаzlikе izmеđu еntrоpiје еkvivаlеntnе Gаusоvе distribuciје i difеrеnciјаlnе еntrоpiје funkciје gustinе vеrоvаtnоćе kоntеkstuаlnih vеktоrа izvеdеnа је nеgеntrоpiја funkciје gustinе vеrоvаtnоćе kоја оdslikаvа pоstојаnjе nеpоvеzаnih znаčеnjа (hоmоnimiја). U sklаdu sа prеdviđаnjimа, nа skupu pоlisеmičnih imеnicа srpskоg јеzikа, zаbеlеžеn је sаmо еfеkаt еntrоpiје еkvivаlеntnе Gаusоvе distribuciје. Nеgеntrоpiја niје imаlа uticај nа vrеmе rеаkciје, štо ukаzuје nа оdsustvо kоmpеticiје izmеđu pоvеzаnih znаčеnjа pоlisеmičnih rеči. Dоbiјеni rеzultаti ukаzuјu nа izuzеtnu оsеtlјivоst kоgnitivnоg sistеmа nа prоbаbilističkе оdlikе јеzikа.- All metadata published by Europeana are available free of restriction under the Creative Commons CC0 1.0 Universal Public Domain Dedication. However, Europeana requests that you actively acknowledge and give attribution to all metadata sources including Europeana
•A novel Dy3+doped MgP2O6 phosphor is synthesized via combustion route.•The Rietveld refinement method is used to calculate the lattice parameters.•Photometric results shows the emission profile in ...yellow-whitish region.•The synthesized phosphor is a potential candidate for WLED applications.
A yellowish white light emitting Dy3+ (0.5, 1, 1.5, 2, and 2.5 mole%) activated MgP2O6 phosphors were prepared using Solution combustion (SC) method. The X-ray diffraction (XRD) and Rietveld refinement confirmed the phase purity with “monoclinic symmetry” having space group P21/n. The lattice constant of the optimum doped sample is also refined by “Full Prof software”. Photoluminescence (PL) spectroscopy was employed to observe the luminescent properties, including both excitation and emission features. The phosphor verified intense yellowish emission at 573 nm, analogous to the hypersensitive electric dipole transition4F9/2→6H13/2. The critical activated concentration of MgP2O6:Dy3+ phosphor approximately occurs at 1.5 mole%. The phosphor exhibits conventional applications in solid-state lighting when excited under UV light at 348 nm.
Display omitted
•Photocatalytic membrane reactors with suspended and immobilized N-TiO2 were used for diclofenac removal.•Coupling H2O2 with the photocatalytic process could enhance the DCF removal ...efficiency.•Coupling H2O2 with the photocatalytic process yielded higher resistant permeate flux rates.
A submerged photocatalytic membrane reactor (SPMR) was used with suspended and immobilized N–TiO2 under visible irradiation for diclofenac (DCF) removal from wastewater. The effects of initial N–TiO2 concentrations for the SPMR with suspended N–TiO2 were determined for batch processes. Hydrogen peroxide was also coupled with the photocatalytic process. In continuous conditions, a reverse osmosis (RO) membrane was combined with the SPMR for enhancing effluent quality. DCF removal by the SPMR with suspended and immobilized N–TiO2 at a low N–TiO2 dosage (0.5g/L) was not much different between the two systems, but increased with higher N–TiO2 dosages for the reactor with suspended N–TiO2. Coupling H2O2 with the photocatalytic process under visible irradiation enhanced the DCF removal efficiency. In continuous conditions, DCF concentrations in the photoreactor increased during the reaction time, while those in the effluent (RO permeate) were steady for both systems and both processes. The permeate flux in the reactor with suspended N–TiO2 declined faster than in the reactor with the immobilized N–TiO2. Coupling H2O2 with the photocatalytic process yielded more resistant permeate flux rates. The cake layer formed on the microfiltration membrane of the SPMR with suspended N–TiO2 under visible irradiation was denser than others after completing the process.
Display omitted
•Oxygen vacancies were induced into ZnFe2O4 nanospheres by thermal treatment.•ZnFe2O4 nanospheres with oxygen vacancies can effectively activate peroxodisulfate.•Oxygen vacancies ...improve the charge transfer process in the ZFOV/PDS/vis system.•ZnFe2O4 with oxygen vacancies exhibits good reusability and stability.
Water pollution is a global environmental problem that needs to be solved urgently. Among them, visible light-assisted catalytic peroxodisulfate (PDS) activation, as an efficient advanced oxidation technology, has great potential in organic wastewater treatment. Therefore, it is crucial to develop efficient photocatalysts based on PDS activation. Here, introducing defects in ZnFe2O4 to construct abundant oxygen vacancies (ZFOV) could not only promote the photocatalytic degradation of TCH, but also enhance magnetic nanoparticles-activated PDS. It was shown that the ZFOV/PDS/vis system could degrade TCH by ∼ 65 % within 30 min, about 1.23 times greater than that of ZFO/PDS/vis system. More importantly, the degradation rate was still over 58 % after three reuse cycles and extremely low leaching of Zn and Fe were observed. The effects of pH, PDS concentration, humic acid, anions and cations on TCH degradation in the presence of ZFOV/PDS/vis systems were also investigated in detail. Combining experimental results revealed that oxygen vacancies acted as catalytically centers which supplied abundant local electrons for the adsorbed S2O82− reaction to produce OH and SO4− via a single electron transfer process. Additionally, oxygen vacancies could also boost electron transfer and take part in the Fe2+/Fe3+ redox cycle. Our study might open up new avenues for designing high efficiency photocatalyst by means of surface engineering and PDS activation.
Abstract
C
60
–bodipy triads and tetrads based on the energy‐funneling effect that show broadband absorption in the visible region have been prepared as novel triplet photosensitizers. The new ...photosensitizers contain two or three different light‐harvesting antennae associated with different absorption wavelengths, resulting in a broad absorption band (450–650 nm). The panchromatic excitation energy harvested by the bodipy moieties is funneled into a spin converter (C
60
), thus ensuring intersystem crossing and population of the triplet state. Nanosecond time‐resolved transient absorption and spin density analysis indicated that the T
1
state is localized on either C
60
or the antennae, depending on the T
1
energy levels of the two entities. The antenna‐localized T
1
state shows a longer lifetime (
τ
T
=132.9 μs) than the C
60
‐localized T
1
state (ca. 27.4 μs). We found that the C
60
triads and tetrads can be used as dual functional photocatalysts, that is, singlet oxygen (
1
O
2
) and superoxide radical anion (O
2
.
−
) photosensitizers. In the photooxidation of naphthol to juglone, the
1
O
2
photosensitizing ability of the C
60
triad is a factor of 8.9 greater than the conventional triplet photosensitizers tetraphenylporphyrin and methylene blue. The C
60
dyads and triads were also used as photocatalysts for O
2
.
−
‐mediated aerobic oxidation of aromatic boronic acids to produce phenols. The reaction times were greatly reduced compared with when Ru(bpy)
3
Cl
2
was used as photocatalyst. Our study of triplet photosensitizers has shown that broadband absorption in the visible spectral region and long‐lived triplet excited states can be useful for the design of new heavy‐atom‐free organic triplet photosensitizers and for the application of these triplet photosensitizers in photo‐organocatalysis.
Plants extract from Ocimum tenuiflorum, Solanum tricobatum, Syzygium cumini, Centella asiatica and Citrus sinensis was used for the synthesis of silver nanoparticles (Ag NPs) from silver nitrate ...solution. Ag NPs were characterized by UV–vis spectrophotometer, X-ray diffractometer (XRD), atomic force microscope (AFM) and scanning electron microscope (SEM). The formation and stability of the reduced silver nanoparticles in the colloidal solution were monitored by UV–vis spectrophotometer analysis. The mean particle diameter of silver nanoparticles was calculated from the XRD pattern according to the line width of the plane, refraction peak using the Scherrer’s equation. AFM showed the formation of silver nanoparticle with an average size of 28 nm, 26.5 nm, 65 nm, 22.3 nm and 28.4 nm corresponding to O. tenuiflorum, S. cumini, C. sinensis, S. tricobatum and C. asiatica, respectively. SEM determination of the brown color stable samples showed the formation of silver nanoparticles and well dispersed nanoparticles could be seen in the samples treated with silver nitrate. Antimicrobial activity of the silver bio-nanoparticles was performed by well diffusion method against Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli and Klebsiella pneumoniae. The highest antimicrobial activity of silver nanoparticles synthesized by S. tricobatum, O. tenuiflorum extracts was found against S. aureus (30 mm) and E. coli (30 mm) respectively. The Ag NPs synthesized in this process has the efficient antimicrobial activity against pathogenic bacteria. Of these, silver nanoparticles are playing a major role in the field of nanotechnology and nanomedicine.
•The typical Vis-NIR spectrum of green leaves is accurately simulated with an easy preparation and cost-effective method.•Solid polyurethane microcapsules encapsulating liquid water (W-PUMCs) were ...prepared.•W-PUMCs simulate the spectral characteristics of water in green leaves, with a similarity of 0.9930 in 1100–2200 nm.•The epoxy doped with W-PUMCs and Cr2O3 can simulate leaves’ spectra, with a similarity of 0.9779 in 400–2500 nm.
Targets can achieve invisibility in the vegetation environments by simulating the reflection spectra of plant green leaves. However, balancing the accuracy and stability of simulation effects, particularly in simulating spectral features caused by water in the leaves, is often challenging. Herein, polyurethane microcapsules encapsulating liquid water (W-PUMCs) were prepared by inverse emulsion polymerization, then mixed with Cr2O3 in specific proportions into the epoxy resin matrix to obtain a material capable of simulating the reflection spectra of green leaves in the visible and near-infrared bands. The normalized similarity (NS) between the spectrum of this material and that of plant (cherry) green leaf can reach 0.9779 in the range of 400–2500 nm. W-PUMCs are used to simulate the spectral characteristics caused by water in the leaves because the spectral NS between W-PUMCs and the green leaf in the 1100–2200 nm range is 0.9930. Cr2O3 is employed to simulate the other major spectral features of green leaves. This strategy guarantees simulation accuracy while simplifying the preparation process and reducing production costs and providing solutions to spectral simulation in the fields of military stealth and ecological protection.
PDF
