(UL)
-
Design, manufacturing, and thermodynamic analysis of a gamma-type stirling engine powered by solar energyTopgül, TolgaStirling engines are external combustion engines. This feature eliminates the possible dependency of the engine on a specific energy resource and allows it to work with diverse energy sources, ... especially solar and other renewable energy sources. Also, Stirling engines could be built in different configurations that have a significant impact on the engine performance. With these aspects, Stirling engines have attracted the attention of researchers. In this study, firstly, a double-cylinder V-type air compressor has been converted to a gamma-type Stirling engine. The block, cylinders, connecting rods, and the crank mechanism of the compressor have been used in the converted engine. For this reason, the air compressor has determined some features of the Stirling engine, such as phase angle, strokes, and cylinder diameter. Other parts of the engine, such as piston, cylinder head, displacer, and displacer cylinder have been manufactured. Secondly, the optimum operating parameters to provide maximum thermal efficiency have been investigated using the nodal thermodynamic analysis considering that the engine is powered by solar energy. In the analysis, helium as the working fluid is used due to its suitable thermodynamic features and safety usage. The optimum working fluid mass and engine speed have been determined as 0.15 g and 100 rad/s for all temperatures (750, 800, and 850 K). Also, the optimum displacer height has been preferred as 190 mm since there is no significant improvement in the thermal efficiency after this dimension. The maximum thermal efficiency has been obtained as 46.5%Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 68, no. 12, Dec. 2022, str. 757-770)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2022Jezik - angleškiCOBISS.SI-ID - 137429763
vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 68, no. 12, Dec. 2022, str. 757-770)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Topgül, Tolga |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: