-
Influence of air plasma pretreatments on mechanical properties in metal-reinforced laminated wood [Elektronski vir]Dahle, Sebastian ...The use of wood-based materials in building and construction is constantly increasing as environmental aspects and sustainability gain importance. For structural applications, however, there are many ... examples where hybrid material systems are needed to fulfil the specific mechanical requirements of the individual application. In particular, metal reinforcements are a common solution to enhance the mechanical properties of a wooden structural element. Metal-reinforced wood components further help to reduce cross-sectional sizes of load-bearing structures, improve the attachment of masonry or other materials, enhance the seismic safety and tremor dissipation capacity, as well as the durability of the structural elements in highly humid environments and under high permanent mechanical load. A critical factor to achieve these benefits, however, is the mechanical joint between the different material classes, namely the wood and metal parts. Currently, this joint is formed using epoxy or polyurethane (PU) adhesives, the former yielding highest mechanical strengths, whereas the latter presents a compromise between mechanical and economical constraints. Regarding sustainability and economic viability, the utilization of different adhesive systems would be preferable, whereas mechanical stabilities yielded for metal-wood joints do not permit for the use of other common adhesive systems in such structural applications. This study extends previous research on the use of non-thermal air plasma pretreatments for the formation of wood-metal joints. The plasma treatments of Norway spruce [Picea abies (L.) Karst.] wood and anodized (E6/EV1) aluminum AlMgSi0.5 (6060) F22 were optimized, using water contact angle measurements to determine the effect and homogeneity of plasma treatments. The adhesive bond strengths of plasma-pretreated and untreated specimens were tested with commercial 2-component epoxy, PU, melamine-urea formaldehyde (MUF), polyvinyl acetate (PVAc), and construction adhesive glue systems. The influence of plasma treatments on the mechanical performance of the compounds was evaluated for one selected glue system via bending strength tests. The impact of the hybrid interface between metal and wood was isolated for the tests by using five-layer laminates from three wood lamellae enclosing two aluminum plates, thereby excluding the influence of congeneric wood-wood bonds. The effect of the plasma treatments is discussed based on the chemical and physical modifications of the substrates and the respective interaction mechanisms with the glue systems.Vir: Frontiers in materials. - ISSN 2296-8016 (Vol. 8, 2022, 1 spletni vir (1 datoteka PDF ([10] str.)))Vrsta gradiva - e-članekLeto - 2022Jezik - angleškiCOBISS.SI-ID - 93765635
Avtor
Dahle, Sebastian |
Srinivasa, Kavyashree |
Žigon, Jure |
Cheumani-Yona, Arnaud Maxime |
Avramidis, Georg |
Viöl, Wolfgang |
Petrič, Marko, 1962-
Teme
hladna plazma |
smreka |
aluminij |
strižna trdnost |
upogibna trdnost |
les |
non-thermal plasma |
spruce |
aluminium |
metal-reinforced laminate |
shear strength |
bending strength
Avtor | Dahle, Sebastian ... |
Naslov | Influence of air plasma pretreatments on mechanical properties in metal-reinforced laminated wood [Elektronski vir] |
Datum objave | 2022-01-17 |
COBISS.SI-ID | 93765635 |
Verzija objave v repozitoriju | Založnikova različica |
Licenca objave v repozitoriju | Creative Commons Priznanje avtorstva 4.0 Mednarodna |
Embargo | Ni določeno |
Projekti, iz katerih je bila financirana objava
Naziv | Akronim | Številka projekta | Financer |
---|---|---|---|
Les in lignocelulozni kompoziti | P4-0015-2020 |
Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije |
Datoteke, ki spadajo k objavi
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Dahle, Sebastian | 51819 |
Srinivasa, Kavyashree | 54475 |
Žigon, Jure | 37804 |
Cheumani-Yona, Arnaud Maxime | 54058 |
Avramidis, Georg | |
Viöl, Wolfgang | |
Petrič, Marko, 1962- | 00395 |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.