E-viri
Recenzirano
-
Erlangga, Wahyu; Alandro, Daffa; Yudha, Nugroho Karya; Utomo, Rohadi Satrio Budi; Putro, Ardi Jati Nugroho; Rochardjo, Heru Santoso Budi; Muflikhun, Muhammad Akhsin
Materials letters, 06/2024, Letnik: 365Journal Article
•Hybrid CFRP-SLA resin successfully manufactured and tested.•The strength significantly increase 3 times higher (91.35 MPa).•The flexural strength can increase 4.7 higher.•Interlocking mechanism proven as the strengthen model.•Delay catastrophic failure mechanism are reported. Enhanced mechanical properties on the hybrid laminates consist of carbon fiber reinforced polymers-stereolithography (CFRP-SLA) reported in the present study. Hybrid laminates can significantly increase tensile strength more than 4,2 times higher (91.35 MPa), and flexural strength 10.7 times higher (156.81 MPa) compared to bare 3D printed samples. The improvement can be achieved due to the modification of the surface of the 3D printed model which has empty cavities filled with resin to form an interlocking mechanism and improved adhesion between laminates. The model can delay catastrophic failure mechanisms. The study could potentially be applied in structural and aerospace fields.
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|
Vir: Osebne bibliografije
in: SICRIS
To gradivo vam je dostopno v celotnem besedilu. Če kljub temu želite naročiti gradivo, kliknite gumb Nadaljuj.