Anti-abrasion thin-film-coated tool is well known for its enhanced micro machining performances. However, coating increases tool edge radius, which spurs additional ploughing and rubbing. Therefore, selecting appropriate thin-film thickness and suitable abrasion-resistant coating material for micro tool is necessary to reduce friction and size effects together. To meet these objectives, first, single-layer TiAlN coating having various thin-film thicknesses has been deposited on uncoated micro end mills by PVD process. By analyzing the cutting force, surface quality and edge radius of both fresh and worn tools in micro milling of P-20 steel, appropriate thin-film thickness has been found to be ≈ 1 μm. Next, single layer TiN and diamond-like-carbon (DLC) coating of thickness ≈ 1 μm have been coated on uncoated WC tools. Then coefficient of friction (COF) and hardness of all coated and uncoated surfaces are assessed. Finally, the performance of all the coated and uncoated tools have been evaluated analytically and experimentally by analyzing dynamic stability and machinability, respectively. All the coated tools manifested enhancement in performance by uplifting stability limit and reducing tool wear, cutting forces, surface roughness and burr heights compared to the uncoated tool. Owing to the least COF, the DLC-coated tool exhibited the best performance by uplifting stability limit by 23.37% and reducing cutting force, surface roughness and burr height by 27.35%, 67.7%, and 30.58%, respectively. However, for a long machining length (1200 mm), the DLC-coated tool could not exhibit such performance as compared to TiAlN-coated tool due to significant delamination.