E-viri
Recenzirano
-
Li, Liqun; Wang, Jiandong; Lin, Panpan; Liu, Han
Ceramics international, 12/2017, Letnik: 43, Številka: 18Journal Article
Crack-free functionally graded TiC particle (TiCp) reinforced Ti6Al4V (TiCp/Ti6Al4V) composite was manufactured by laser melting deposition (LMD) technology with TiC volume fraction changing gradually from 0% to 50%. This research focuses on the relationship between the microstructure and mechanical properties (microhardness and tensile properties) of TiCp/Ti6Al4V composites under different TiC volume fractions. Besides the unmelted TiC particles, the granular and chain shaped eutectic TiC phases are observed in the composite with 5vol% TiC due to the melting and dissolution of TiC particles into matrix. The granular and dendritic primary TiC phases are obtained in the composite with 10vol% TiC, while the chain shaped eutectic TiC phases can scarcely be seen. The main reinforcement phases are primary TiC phases when the TiC volume fraction exceeds 15%. (i) The quantity of unmelted TiC particles, (ii) the quantity and size of primary TiC phases and (iii) the porosity of composite increase gradually when the TiC volume fraction increases. The interfaces exhibit good bonding between consecutive layers. The microhardness of the functionally graded TiCp/Ti6Al4V composite increases gradually with TiC volume fraction increasing. It is attributed to the C element in solid solution and the appearance of eutectic and primary TiC phases. The microhardness at the top layer with 50vol% TiC is improved by nearly 94% compared with that at the Ti6Al4V side. The tensile strength of TiCp/Ti6Al4V composite with 5vol% TiC is enhanced by nearly 12.3% compared with that of the Ti6Al4V matrix alloy. However, both the tensile strength and elongation of composite decrease gradually when the TiC volume fraction exceeds 5%. The reason is that the quantity of brittle unmelted TiC particles and the quantity and size of dendritic TiC phases increase with TiC volume fraction increasing. The fracture mechanism of the TiCp/Ti6Al4V composite is quasi-cleavage fracture.
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|
Vir: Osebne bibliografije
in: SICRIS
To gradivo vam je dostopno v celotnem besedilu. Če kljub temu želite naročiti gradivo, kliknite gumb Nadaljuj.