E-viri
Recenzirano
Odprti dostop
-
Basha, Ali M.; Eldisouky, Esraa A.
International Journal of Geo-Engineering, 12/2023, Letnik: 14, Številka: 1Journal Article
The stability of circular footings under eccentric vertical loads is a significant problem in geotechnical engineering. Therefore, this paper shows the results of experimental tests carried out on an eccentrically loaded circular foundation on sand soil. The focus of this research is on examining how eccentric loads affect the behavior of circular footings on sand soil, both with and without skirts. Various load eccentricities (e) equals zero, 2.50, 5.00, 7.50, 10.00, 12.50, 15.00, 17.50 and 20.00 mm are used. In addition to, a 60 mm-diameter circular foundation and sand with an 85% relative density (Dr) are used in this experimental study. To study the effect of changing the skirts depth on the load-settlement response skirts with different depths (h) = 60 mm, 150 mm, 240 mm are used for vertical reinforcement. In comparison to the unreinforced condition, test findings show an improvement in ultimate bearing capacity. When the skirts are positioned at the ideal embedment depth L/D = 4, it is found that the circular footing's load-settlement behavior is enhanced by 92% and 93% in case of using (e/D) ratio = 0.125 and 0.25 compared to the unreinforced case.
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|
Vir: Osebne bibliografije
in: SICRIS
To gradivo vam je dostopno v celotnem besedilu. Če kljub temu želite naročiti gradivo, kliknite gumb Nadaljuj.