Display omitted •Relative humidity affects the amount of dimethyl methylphosphonate (DMMP) sorbed on office materials.•Cardboard retains captured DMMP longer than paint layer and polyurethane foam.•DMMP, a nerve agent simulant, was retained after 6 weeks on office materials. Dimethyl methylphosphonate (DMMP) was used as a simulant to investigate the sorption and desorption of G-series nerve agents such as sarin (GB) released into an office space. DMMP was disseminated systematically as an aerosol and vapor on three common office materials, cardboard, polyurethane foam, and cured acrylic-based paint. The amount of DMMP initially captured on the office materials and the amount retained over a period of 10 h was tracked gravimetrically and by solvent extraction and gas chromatography/mass spectrometry (GC/MS). Physicochemical properties of the office media including the surface area per mass, polarity, and Henry’s constant were determined to help explain the capture and release of DMMP that was observed. Polyurethane foam was found to have the largest sorption capacity for DMMP in a low-humidity setting, however, cardboard was found to have the largest sorption capacity at higher humidity. A fraction of the collected DMMP desorbed with first-order kinetics from all of the office materials in an open-air atmosphere over 8 h. However, importantly for forensic purposes relevant to an indoor attack, a significant quantity (most notably on cardboard) of the nerve agent simulant was retained after 6 weeks and could be analyzed efficiently using solvent extraction followed by GC/MS.