The chemical 6PPD-quinone is highly toxic to some fish species of the Oncorhynchus and Salvelinus genera and is the oxidation product of the common car tire additive 6PPD. We present a new sample preparation method that involves liquid-liquid extraction of water samples followed by silica-based solid phase extraction prior to LC–MS/MS analysis. The new sample preparation method showed good analyte recovery from spiked water samples (78%–91%) and a low ion suppression effect, surpassing previously published methods. This new method was successfully validated, achieving a limit of quantification of 5 ng/L and estimated expanded measurement uncertainty of 18.6%. In a proof-of-concept study, the method was applied to several water samples from various sources in Southern Norway. These were runoff samples from tunnel washing, from a tunnel runoff treatment plant and downstream of the plant drain. In addition, two water samples from puddles were included: one was run-off from an artificial soccer turf field and one from a puddle on a country road. The results of the analyses revealed that the concentration of 6PPD-quinone was above the LC50 reported for coho salmon ( Oncorhynchus kisutch ) in all samples except the samples from and downstream of the treatment plant. The highest measured concentration was 258 ng/L, which is the 2.7-fold of the reported LC50 in coho salmon (95 ng/L). Our initial data emphasize the need for more comprehensive environmental monitoring of 6PPD-quinone as well as toxicological studies in aquatic organisms.