E-viri
Recenzirano
Odprti dostop
-
Hong, Eugene; Yeneneh, Anteneh Mesfin; Sen, Tushar Kanti; Ang, Ha Ming; Kayaalp, Ahmet
Advances in colloid and interface science, 07/2018, Letnik: 257Journal Article
Large quantities of sludge is generated from different sections of a wastewater treatment plant operation. Sludge can be a solid, semisolid or liquid muddy residual material. Understanding the flow behaviour and rheological properties of sewage sludge at different sections of a wastewater treatment plant (WWTP) is important for the design of pumping system, mixing, hydrodynamics and mass transfer rates of various sludge treatment units, optimization of conditioning dose and for sustainable sludge management. The current article provides a comprehensive review on up to date literature information on rheological behaviour of raw primary sludge, excess activated sludge, thickened excess activated sludge, mixture of raw primary and thickened excess activated sludge (mixed sludge), digested sludge, and biosolid under the influence of different operating parameters and their impacts on process performance. The influences of various process parameters such as solid concentration, temperature, pH, floc particle size, primary to secondary sludge mixing ratio, aging and conditioning agent doses on the rheological behaviour of sludge from different treatment units of WWTPs are critically analysed here. Yield stress was reported to increase with increasing solid concentration for all types of sludge whereas viscosity showed a decreasing trend with decreasing total solid concentration and percentage of thickened excess activated sludge in the mixture. Temperature showed an inverse relationship with yield stress and viscosity. Viscosity was reported to be decreased with decrease in pH. The effect of various conditioning agents on the rheological behaviour of sludge are also discussed here. The applicability and practical significance of various rheological models such as Bingham, Power Law (Ostwald), Herschel-Bulkley, Casson, Sisko, Careau, and Cross models to experimental rheological characteristics of various sludges were presented here. The reported results on various rheological parameters such as shear stress, yield stress, flow index, infinite, zero-rate viscosity, and flow consistency index of different sludge types obtained from the best fitted model were also compiled here. Conclusions have been drawn from the literature reviewed and few suggestions for future research direction are proposed. Display omitted •Rheological behaviour of different sources sludge of a WWTP has been reviewed.•Various physico-chemical factors on sludge rheological behaviour has been analysed.•The impacts of sludge rheology on process performance has been critically discussed.•Identified future research gap on sludge rheology study.
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|
Vir: Osebne bibliografije
in: SICRIS
To gradivo vam je dostopno v celotnem besedilu. Če kljub temu želite naročiti gradivo, kliknite gumb Nadaljuj.