The design of the front-end electronics for the new tracker of the MAGNEX Focal Plane Detector (FPD) for the NUMEN project is presented. The front-end is based on the VMM chip, developed for ATLAS experiment at CERN. The architecture of the front-end (FE) electronics is designed to be modular and scalable to the final detector. The segmented anode board is designed in order to take advantage of the unique performances of the VMM chip, allowing a digital reconstruction of the track at high event rate. This anode board is connected to front-end by mean of Micro Coax Cable Assembly and does not make use of vacuum connectors. The front-end boards will be placed in air, facilitating in this way the heat dissipation and the connection to the read-out (RO) electronics. An innovative anode read-out strategy allows the reduction of the total number of channels to about 1400 and the measurement of the track at different depth in the detector with 750 µm spatial resolution.