ALL libraries (COBIB.SI union bibliographic/catalogue database)
-
Influence of feedstock characteristics and process parameters on properties ofMIM parts made of 316LBerginc, Boštjan ; Kampuš, Zlatko ; Šuštaršič, BorivojMetal injection moulding (MIM) is already a well establiched and promising technology for the mass production of small, complex, near net shape products. The dimensions and mechanical properties of ... MIM products are influenced by the feedstock characteristics, the process parameters of injection moulding, as well as the debinding and the sintering. The mechanical properties primarily depend on the sintering density and the microstructure. However, the process parameters of the injection moulding must not be neglected. The present investigations were focused on the influence of the main injection moulding parameters and the sintering conditions. The investigations showed that appropriate mechanical properties can be obtained for MIM products. However, they are drastically deteriorated if inappropriate injection moulding and sintering conditions are selected. In this contribution the influence of the injection moulding and sintering parameters on the mechanical properties of sintered material is presented and discussed. For the optimisation of the whole process a feedstock characterisation was also made.Source: Powder Metallurgy. - ISSN 0032-5899 (Vol. 50, no. 2, 2007, str. 172-183)Type of material - article, component partPublish date - 2007Language - englishCOBISS.SI-ID - 614058
Author
Berginc, Boštjan |
Kampuš, Zlatko |
Šuštaršič, Borivoj
Topics
metal injection mouldingz |
stainless steel |
mechanical properties |
Feedstock characterisation |
influence of process parameters |
injekcijsko brizganje kovine |
nerjavno jeklo |
mehanske lastnosti |
Feedstock karakteristika |
vpliv procesnih parametrov
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Berginc, Boštjan | 24246 |
Kampuš, Zlatko | 05911 |
Šuštaršič, Borivoj | 08195 |
Source: Personal bibliographies
and: SICRIS
Select pickup location:
Material pickup by post
Delivery address:
Address is missing from the member's data.
The address retrieval service is currently unavailable, please try again.
By clicking the "OK" button, you will confirm the pickup location selected above and complete the reservation process.
By clicking the "OK" button, you will confirm the above pickup location and delivery address, and complete the reservation process.
By clicking the "OK" button, you will confirm the address selected above and complete the reservation process.
Notification
Automatic login and reservation service currently not available. You can reserve the material on the Biblos portal or try again here later.
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
Pickup location | Material status | Reservation |
---|
Reservation in progress
Please wait a moment.
Reservation was successful.
Reservation failed.
Reservation...
Membership card:
Pickup location: