-
Cutting performance of solid ceramic and carbide end milling tools in machining of nickel based alloy Inconel 718 and stainless steel 316LGrguraš, Damir ; Kern, Matjaž ; Pušavec, FranciMachining of nickel based alloys is in most of the times affected via high mechanical and thermal loads, causing high wear tendency of carbide tools, even at relatively low cutting speeds. On the ... other hand, ceramic as a cutting material, is more chemically stable and retains its hardness even at higher temperatures (> 800 °C) when machining difficult%to%cut materials. Therefore, to increase productivity, as an alternative to carbide tools, full body ceramic milling tools are proposed. In this paper, high speed milling process, using full body ceramic end milling tools, was analysed in parallel to carbide tools. Tool life of ceramic tools was compared with tool life of more widely used carbide tools when milling two different difficult-to-cut materials, i. e. nickel based alloy Inconel 718 and austenitic stainless steel 316L, under different cooling lubrication conditions. In addition, surface integrity and cost analysis were taken into account. Results are showing that ceramic milling tools are increasing material removal rate and productivity. However, the overall efficiency of ceramic tools can still be economically questionable.Source: Advances in production engineering & management. - ISSN 1854-6250 (Vol. 14, no. 1, Mar. 2019, str. 27-38)Type of material - article, component partPublish date - 2019Language - englishCOBISS.SI-ID - 16539931
Author
Grguraš, Damir |
Kern, Matjaž |
Pušavec, Franci
Topics
milling |
ceramic end mill |
carbide end mill |
Inconel 718 |
stainless steel 316L |
productivity |
frezanje |
keramična frezala |
Inconel 718 |
nerjavno jeklo 316L |
produktivnost
source: Advances in production engineering & management. - ISSN 1854-6250 (Vol. 14, no. 1, Mar. 2019, str. 27-38)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Grguraš, Damir | 38150 |
Kern, Matjaž | 50820 |
Pušavec, Franci | 26559 |
Select pickup location:
Material pickup by post
Notification
Subject headings in COBISS General List of Subject Headings
Select pickup location
Pickup location | Material status | Reservation |
---|
Please wait a moment.