-
As-rolled multi-phase microalloyed steel bars with improved properties = Valjane večfazne mikrolegirane jeklene palice z izboljšanimi lastnostmiDrobnjak, Djordje ; Koprivica, A.A series of experimental steels, based on a 0.3 C, 1.5 Mn, 0.1 V composition, with and without 0.01% Ti addition, was made by laboratory and full scale casting, and fabricated into 22 mmdia bars by ... full-scale hot-rolling. Multi phase Polygonal Ferrite-Pearlite-Non Polygonal Ferrite (PF-P-NPF) structures with varying amount of NPF are obtained in as-rolled bars. Acicular Ferrite (AF) and classical Bainite Sheaves (BS) are found to be dominant NPF morphologies in steels with a low (<30%) and a high (>40%) fraction of NPF, respectively. In Ti-bearing PF-P-AF steels, the PF-grain and P-colony size control, obtained through fine TiN particles, which also provide preferential sites for intragranular nucleation of AF, a tensile strength of 800/850 MPa and 900/950 MPa in 0.2 and 0.3 C steels was obtained, while maintaining the room temperature CVN impact energy at a level of 65/75 J and 40/50 J, respectively. A high fraction of grain boundary nucleated BS is promoted by increasing the content of Cr, Mo or Mn above the base level. The main effect of introducing BS into structure is a drop in impact toughness. Even so, in some BS dominated steels (notably Cr treated) an impact energy of 30/35 J is maintained at a tensile strength level of 1050/1100 MPa. These results have provided a bases for the development of as-rolled medium carbon mycroalloyed engineering bars, that achieve satisfactory properties in the as-rolled conditions without the need for subsequent heat treatment.Source: Kovine zlitine tehnologije = Metals alloys technologies. - ISSN 1318-0010 (Letn. 31, št. 6, 1997, str. 533-537)Type of material - article, component part ; adult, seriousPublish date - 1997Language - englishCOBISS.SI-ID - 71338
Author
Drobnjak, Djordje |
Koprivica, A.
Topics
mikrolegiranje |
valjane palice |
poligonalni ferit |
perlit |
ne poligonalni ferit |
bainit |
acikularni ferit |
trdnost |
microalloying |
bara-rolling |
polygonal ferrite |
bainite |
acicular ferrite |
strength |
toughness
source: Kovine zlitine tehnologije = Metals alloys technologies. - ISSN 1318-0010 (Letn. 31, št. 6, 1997, str. 533-537)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|
Select pickup location:
Material pickup by post
Notification
Subject headings in COBISS General List of Subject Headings
Select pickup location
Pickup location | Material status | Reservation |
---|
Please wait a moment.
zato vas vljudno prosimo, da nas glede knjižničnega gradiva predhodno kontaktirate na e-mail:
knjiznica@imt.si
Hvala za razumevanje!
Knjižnica IMT