UP - logo
Institute of Metals and Technology, Ljubljana (IMTLJ)
Spoštovane uporabnike knjižnice IMT obveščamo, da je zaradi urejanja knjižnične zbirke moten prost dostop do gradiva,
zato vas vljudno prosimo, da nas glede knjižničnega gradiva predhodno kontaktirate na e-mail:
knjiznica@imt.si

Hvala za razumevanje!
Knjižnica IMT
  • Microstructure, yield stress and hardness in weld heat-affected zone of 9-12% Cr steels
    Kafexhiu, Fevzi ; Vodopivec, Franc ; Vojvodič-Tuma, Jelena
    The effect of welding and tempering on microstructure and room temperature mechanical properties of two types of creep-resistant steels, X20CrMoV121 and P91, was investigated. Samples were welded and ... then tempered for 17 520 h at 650 [compositum]C and 8 760 h at 750 [compositum]C. After tempering, the room-temperature yield stress and hardness of two regions of weld heat-affected zone (HAZ) were determined. In addition, the scanning electron microscopy (SEM) imaging was carried out. It was found that the effect of tempering at 750 [compositum]C on the microstructure, room-temperature yield stress and hardness was greater than the effect of tempering at 650 [compositum]C. It was also found that weakest part of the HAZ for both tempering temperatures, with regard to the yield stress and hardness, was the coarse grained [gamma] microstructure.
    Source: Zbornik = Proceedings (Str. 296-303)
    Type of material - conference contribution
    Publish date - 2013
    Language - english
    COBISS.SI-ID - 985770

source: Zbornik = Proceedings (Str. 296-303)

loading ...
loading ...
loading ...