Display omitted
•Organosolv selectively fractionates lignocellulose into high-purity streams.•High-purity lignin needed for higher contribution towards feasible biorefineries.•Ethanol organosolv and ...wood materials dominate research investigations.•Other substrates need definition regarding most suitable organosolv systems.•Integration in 1st generation ethanol plants can boost commercialization.
Lignocellulose-based processes for production of value-added products still face bottlenecks to attain feasibility. The key might lie on the biorefining of all lignocellulose main polymers, that is, cellulose, hemicellulose and lignin. Lignin, considered an impediment in the access of cellulose and normally considered for energy recovery purposes, can give a higher contribution towards profitability of lignocellulosic biorefineries. Organosolv pretreatment allows selective fractionation of lignocellulose into separate cellulose-, hemicellulose- and lignin-rich streams. Ethanol organosolv and wood substrates dominated the research studies, while a wide range of substrates need definition on the most suitable organosolv pretreatment systems. Techno-economic and environmental analyses of organosolv-based processes as well as proper valorization strategies of the hemicellulose-rich fraction are still scarce. In view of dominance of ethanol organosolv with high delignification yields and high-purity of the recovered cellulose-rich fractions, close R & D collaboration with 1st generation ethanol plants might boost commercialization.
Water oxidation is a crucial reaction for renewable energy conversion and storage. Among the alkaline oxygen evolution reaction (OER) catalysts, NiFe based oxyhydroxides show the highest catalytic ...activity. However, the details of their OER mechanism are still unclear, due to the elusive nature of the OER intermediates. Here, using a novel differential electrochemical mass spectrometry (DEMS) cell interface, we performed isotope‐labelling experiments in 18O‐labelled aqueous alkaline electrolyte on Ni(OH)2 and NiFe layered double hydroxide nanocatalysts. Our experiments confirm the occurrence of Mars‐van‐Krevelen lattice oxygen evolution reaction mechanism in both catalysts to various degrees, which involves the coupling of oxygen atoms from the catalyst and the electrolyte. The quantitative charge analysis suggests that the participating lattice oxygen atoms belong exclusively to the catalyst surface, confirming DFT computational hypotheses. Also, DEMS data suggest a fundamental correlation between the magnitude of the lattice oxygen mechanism and the faradaic efficiency of oxygen controlled by pseudocapacitive oxidative metal redox charges.
Differential electrochemical mass spectrometry using a hanging droplet cell confirmed the occurrence of Mars‐van‐Krevelen lattice oxygen evolution reaction mechanism in both Ni(OH)2 and NiFe layered double hydroxide nanocatalysts. This mechanism involves the coupling of oxygen atoms from the catalyst surface and the electrolyte.
NiFe and CoFe (MFe) layered double hydroxides (LDHs) are among the most active electrocatalysts for the alkaline oxygen evolution reaction (OER). Herein, we combine electrochemical measurements, ...operando X-ray scattering and absorption spectroscopy, and density functional theory (DFT) calculations to elucidate the catalytically active phase, reaction center and the OER mechanism. We provide the first direct atomic-scale evidence that, under applied anodic potentials, MFe LDHs oxidize from as-prepared α-phases to activated γ-phases. The OER-active γ-phases are characterized by about 8% contraction of the lattice spacing and switching of the intercalated ions. DFT calculations reveal that the OER proceeds via a Mars van Krevelen mechanism. The flexible electronic structure of the surface Fe sites, and their synergy with nearest-neighbor M sites through formation of O-bridged Fe-M reaction centers, stabilize OER intermediates that are unfavorable on pure M-M centers and single Fe sites, fundamentally accounting for the high catalytic activity of MFe LDHs.
Display omitted
•Hydrothermal pretreatment recovered starch and protein from brewer’s spent grain.•Edible fungi assimilated the recovered streams to produce fungal biomass and ethanol.•This process ...increased up to 30% in protein content of BSG compared to untreated BSG.•Neurospora intermedia resulted into the highest protein content of 59.62% from BSG.•A brewery biorefinery based on BSG valorization with the focus on food and feed production.
This study aimed at recovering a highly concentrated starch and protein stream from the brewer’s spent grain (BSG). The effect of pretreatment temperature and retention time on the solubilization of starch and protein; and the generation of fermentation inhibitors were studied. Then, the application of recovered streams for fungal cultivation was evaluated using different edible fungi Aspergillus oryzae, Neurospora intermedia, and Rhizopus delemar. The hydrothermal pretreatment resulted in the highest solubilized starch concentration, 43 g/L, corresponding to 83% solubilization of initial BSG starch content. The highest protein concentration was 27 g/L (48% solubilization of initial BSG protein content). Cultivation with Neurospora intermedia on the recovered streams from the two best pretreatment conditions, 140 ℃ for 4 h and 180 ℃ for 30 min, resulted in pure fungal biomass with the highest protein content 59.62% and 50.42% w/w, respectively. Finally, a brewery biorefinery was proposed for the valorization of BSG.
Cu oxides catalyze the electrochemical carbon dioxide reduction reaction (CO2RR) to hydrocarbons and oxygenates with favorable selectivity. Among them, the shape-controlled Cu oxide cubes have been ...most widely studied. In contrast, we report on novel 2-dimensional (2D) Cu(II) oxide nanosheet (CuO NS) catalysts with high C
products, selectivities (> 400 mA cm
) in gas diffusion electrodes (GDE) at industrially relevant currents and neutral pH. Under applied bias, the (001)-orientated CuO NS slowly evolve into highly branched, metallic Cu
dendrites that appear as a general dominant morphology under electrolyte flow conditions, as attested by operando X-ray absorption spectroscopy and in situ electrochemical transmission electron microscopy (TEM). Millisecond-resolved differential electrochemical mass spectrometry (DEMS) track a previously unavailable set of product onset potentials. While the close mechanistic relation between CO and C
H
was thereby confirmed, the DEMS data help uncover an unexpected mechanistic link between CH
and ethanol. We demonstrate evidence that adsorbed methyl species, *CH
, serve as common intermediates of both CH
H and CH
CH
OH and possibly of other CH
-R products via a previously overlooked pathway at (110) steps adjacent to (100) terraces at larger overpotentials. Our mechanistic conclusions challenge and refine our current mechanistic understanding of the CO
electrolysis on Cu catalysts.
Display omitted
•The replacement of fossil-based plastics by polyhydroxyalkanoates will increase.•Recycling strategies need to be developed to avoid polyhydroxyalkanoate waste.•Extrusion and ...pyrolysis dominate mechanical and chemical recycling, respectively.•Biological recycling studies are scarce and related mostly to anaerobic conditions.•Clear links between material composition and ease of recycling need to be unveiled.
The plastics market is dominated by fossil-based polymers, but their gradual replacement by bioplastics (e.g., polyhydroxyalkanoates) is occurring. However, recycling strategies need to be developed to truly unveil the impact of bioplastics on waste accumulation. This review provides a state of the art of recycling strategies investigated for polyhydroxyalkanoate-based polymers and proposes future research avenues. Research on mechanical and chemical recycling is dominated by the use of extrusion and pyrolysis, respectively, while that on biodegradation of polyhydroxyalkanoates is related to soil and aquatic samples, and to anaerobic digestion towards biogas production. Research gaps exist in the relationships between polymer composition and ease of use of all recycling strategies investigated. This is of utmost importance since it will influence the need for separation at the source. Therefore, research emphasis needs to be given to the area to follow the continuous improvement of the process economics towards widespread commercial production of polyhydroxyalkanoates.
Alfalfa is an important forage crop that is moderately tolerant to salinity; however, little is known about its salt-tolerance mechanisms. We studied root and leaf transcriptomes of a salt-tolerant ...(G03) and a salt-sensitive (G09) genotype, irrigated with waters of low and high salinities. RNA sequencing led to 1.73 billion high-quality reads that were assembled into 418,480 unigenes; 35% of which were assigned to 57 Gene Ontology annotations. The unigenes were assigned to pathway databases for understanding high-level functions. The comparison of two genotypes suggested that the low salt tolerance index for transpiration rate and stomatal conductance of G03 compared to G09 may be due to its reduced salt uptake under salinity. The differences in shoot biomass between the salt-tolerant and salt-sensitive lines were explained by their differential expressions of genes regulating shoot number. Differentially expressed genes involved in hormone-, calcium-, and redox-signaling, showed treatment- and genotype-specific differences and led to the identification of various candidate genes involved in salinity stress, which can be investigated further to improve salinity tolerance in alfalfa. Validation of RNA-seq results using qRT-PCR displayed a high level of consistency between the two experiments. This study provides valuable insight into the molecular mechanisms regulating salt tolerance in alfalfa.
The phyllosphere is the aerial part of plants that is exposed to different environmental conditions and is also known to harbor a wide variety of bacteria including both plant and human pathogens. ...However, studies on phyllosphere bacterial communities have focused on bacterial composition at different stages of plant growth without correlating their functional capabilities to bacterial communities. In this study, we examined the seasonal effects and temporal variabilities driving bacterial community composition and function in spinach phyllosphere due to increasing salinity and season and estimated the functional capacity of bacterial community16S V4 rRNA gene profiles by indirectly inferring the abundance of functional genes based on metagenomics inference tool Piphillin. The experimental design involved three sets of spinach (Spinacia oleracea L., cv. Racoon) grown with saline water during different seasons. Total bacteria DNA from leaf surfaces were sequenced using MiSeq® Illumina platform. About 66.35% of bacteria detected in the phyllosphere were dominated by four phyla- Proteobacteria, Firmicutes, Bacteroidetes, and Actinobacteria. Permutational analysis of variance (PERMANOVA) showed that phyllosphere microbiomes were significantly (P < 0.003) affected by season, but not salinity (P = 0.501). The most abundant inferred functional pathways in leaf samples were the amino acids biosynthesis, ABC transporters, ribosome, aminoacyl-tRNA biosynthesis, two-component system, carbon metabolism, purine metabolism, and pyrimidine metabolism. The photosynthesis antenna proteins pathway was significantly enriched in June leaf samples, when compared to March and May. Several genes related to toxin co-regulated pilus biosynthesis proteins were also significantly enriched in June leaf samples, when compared to March and May leaf samples. Therefore, planting and harvesting times must be considered during leafy green production due to the influence of seasons in growth and proliferation of phyllosphere microbial communities.
Display omitted
•Fish processing sidestreams follow biogas production and wastewater treatment.•The sidestreams can alternatively be used for production of ingredients for feed.•An edible fungus was ...used to convert the nutrients into protein-rich biomass.•Protein content of the biomass was influenced by the stream type.•220–480 kg of biomass containing 33–62% protein were produced per ton of COD.
The sidestreams produced during fish processing end in a separation tank where the resulting fractions follow biogas production or wastewater treatment. These streams can alternatively be used for production of protein-rich fungal biomass for e.g. fish feed applications, a product in increasing demand. These streams and upper streams originated during fish processing were used in this study for production of biomass using the edible filamentous fungus Rhizopus oryzae. The COD of the streams varied between 11 and 54 kg/m3 and, after fungal conversion of organic matter into protein-rich biomass and separation, a reduction of 34–69% was achieved. The stream origin had an effect on the final production and composition of the fungal biomass: 480 kg of biomass containing 33% protein per ton of COD were produced after cultivation in the separation tank streams, while 220 kg of biomass containing 62% protein per ton of COD were produced in upper sidestreams with lower amounts of suspended solids. Changing the initial pH (6.1–6.5) to 5.0 had a negative influence on the amount of biomass produced while medium supplementation had no influence. Thus, fish processing sidestreams can be diverted from biogas production and wastewater treatment to the production of protein-rich biomass for feed applications.
Abstract
The Solanaceae family includes commercially important vegetable crops characterized by their relative sensitivity to salinity. Evaluation of 8 eggplant (
Solanum melongena
), 7 tomato (
...Solanum lycopersicum
), and 8 pepper (
Capsicum
spp.) heirloom cultivars from different geographic regions revealed significant variation in salt tolerance. Relative fruit yield under salt treatment varied from 52 to 114% for eggplant, 56 to 84% for tomato, and 52 to 99% for pepper. Cultivars from all three crops, except Habanero peppers, restricted Na transport from roots to shoots under salinity. The high salt tolerance level showed a strong association with low leaf Na concentration. Additionally, the leaf K-salinity/K-control ratio was critical in determining the salinity tolerance of a genotype. Differences in relative yield under salinity were regulated by several component traits, which was consistent with the gene expression of relevant genes. Gene expression analyses using 12 genes associated with salt tolerance showed that, for eggplant and pepper, Na
+
exclusion was a vital component trait, while sequestration of Na
+
into vacuoles was critical for tomato plants. The high variability for salt tolerance found in heirloom cultivars helped characterize genotypes based on component traits of salt tolerance and will enable breeders to increase the salt tolerance of Solanaceae cultivars.