A recent slip-rate of an active fault is a very important seismotectonic parameter, but not easy to determine. Idrija fault, 120 km long, is a prominent geomorphologic feature with large seismogenic ...potential, still needed to be researched. Measurements of tectonic micro-displacements can provide insight into its recent activity. The Učja valley extends transversally to the Idrija fault and was therefore selected for the installation of TM 71 extensometer. Measurements on the crack within its inner fault zone are conducted from the year 2004. In 14 years of observations a systematic horizontal displacements with average rate of 0.21 mm/year and subordinate vertical displacements of 0.06 mm/year were established, proving the activity of this fault. An overview of methods of displacement measurements related to active faults and of newer interdisciplinary investigations of the Idrija fault is given. Displacement rates are beside for geodynamic interpretations important for improvement of seismotectonic models and thus for better seismic hazard assessment.
The 1998 Krn Mountains Mw 5.6 earthquake had widespread effects on the natural environment, among which rockfalls prevail. All rockfalls were evaluated to estimate the total affected area. The 180 ...km2 area (r=7.6 km) was established and compared with two worldwide datasets. The affected area is considerably below the upper bound limit established from both datasets. The same is valid for the nearby 1976 Friuli Mw 6.4 earthquake with a 2050 km2 affected area. However, comparison with the ESI 2007 scale definitions has shown that the area affected by the 1998 Imax VII–VIII event is significantly larger than the one proposed by this scale, but smaller for the 1976 Imax X event. This could not be explained by differences in hypocentral depth or focal mechanisms of both events. The results of the study have implications for seismic hazard assessment and for understanding environmental effects caused by moderate earthquakes in mountain regions.
Two moderate magnitude (Mw = 5.6 and 5.2) earthquakes in Krn Mountains occurred in 1998 and 2004 which had maximum intensity VII-VIII and VI-VII EMS-98, respectively. Comparison of both macroseismic ...fields showed unexpected differences in the epicentral area which cannot be explained by site effects. Considerably, different distribution of the highest intensities can be noticed with respect to the strike of the seismogenic fault and in some localities even higher intensities have been estimated for the smaller earthquake. Although hypocentres of both earthquakes were only 2 km apart and were located on the same seismogenic Ravne fault, their focal mechanisms showed a slight difference: almost pure dextral strike-slip for the first event and a strike-slip with small reverse component on a steep fault plane for the second one. Seismotectonically the difference is explained as an active growth of the Ravne fault at its NW end. The radiation patterns of both events were studied to explain their possible impact on the observed variations in macroseismic fields and damage distribution. Radiation amplitude lobes were computed for three orthogonal directions: radial P, SV, and SH. The highest intensities of both earthquakes were systematically observed in directions of four (1998) or two (2004) large amplitude lobes in SH component (which corresponds mainly to Love waves), which have significantly different orientation for both events. On the other hand, radial P direction, which is almost purely symmetrical for the strike-slip mechanism of 1998 event, showed for the 2004 event that its small reverse component of movement has resulted in a very pronounced amplitude lobe in SW direction where two settlements are located which expressed higher intensities in the case of the 2004 event with respect to the 1998 one. Although both macroseismic fields are very complex due to influences of multiple earthquakes, retrofitting activity after 1998, site effects, and sparse distribution of settlements, unusual differences in observed intensities can be explained with different radiation patterns.
On Kranjsko polje in central Slovenia, carbonate conglomerates have been dated to several Pleistocene glacial phases by relative dating based on the morphostratigrafic mapping and borehole data, and ...by paleomagnetic and 10Be analyses. To define how the age of conglomerates determines the geomorphological characteristics of karst surface features, morphometrical and distributive spatial analyses of dolines were performed on three test sites including old, middle, and young Pleistocene conglomerates. As dolines on conglomerates are covered by a thick soil cover and show a strong human influence, the ground penetrating radar (GPR) method was first applied to select dolines appropriate for further morphometrical and distributive analyses. A considerable modification of natural morphology was revealed for cultivated dolines, excluding this type of depression from spatial analyses. Input parameters for spatial analyses (doline rim and deepest point) were manually extracted from the 1 × 1 m grid digital elevation model (DEM) originating from the high-resolution LiDAR (Light Detection and Ranging) data. Basic geomorphological characteristics, namely circularity index, planar size, depth, and density index of dolines were calculated for each relative age of conglomerates, and common characteristics were determined from these data to establish a general surface typology for a particular conglomerate. The obtained surface typologies were spatially extrapolated to the wider conglomerate area in central Slovenia to test the existent geological dating. Spatial analyses generally confirmed previous dating, while in four areas the geomorphological characteristics of dolines did not correspond to the existing dating and require further revision and modification. Doline populations exhibit specific and common morphometrical and distributive characteristics on conglomerates of a particular age and can be a reliable and fast indicator for their dating.
Ground penetrating radar (GPR) using a special unshielded 50 MHz Rough Terrain Antenna (RTA) in combination with a shielded 250 MHz antenna was used to study the capability of this geophysical method ...for detecting cave sediments. Allochthonous cave sediments found in the study area of Lanski vrh (W Slovenia) are now exposed on the karst surface in the so-called “unroofed caves” due to a general lowering of the surface (denudation of carbonate rocks) and can provide valuable evidence of the karst development. In the first phase, GPR profiles were measured at three test locations, where cave sediments are clearly evident on the surface and appear with flowstone. It turned out that cave sediments are clearly visible on GPR radargrams as areas of strong signal attenuation. Based on this finding, GPR profiling was used in several other places where direct indicators of unroofed caves or other indicators for speleogenesis are not present due to strong surface reshaping. The influence of various field conditions, especially water content, on GPR measurements was also analysed by comparing radargrams measured in various field conditions. Further mineralogical-geochemical analyses were conducted to better understand the factors that influence the attenuation in the area of cave sediments. Samples of cave sediments and soils on carbonate rocks (rendzina) were taken for X-ray diffraction (XRD) and X-ray fluorescence (XRF) analyses to compare the mineral and geochemical compositions of both sediments. Results show that cave sediments contain higher amounts of clay minerals and iron/aluminium oxides/hydroxides which, in addition to the thickness of cave sediments, can play an important role in the depth of penetration. Differences in the mineral composition also lead to water retention in cave sediments even through dry periods which additionally contribute to increased attenuation with respect to surrounding soils. The GPR method has proven to be reliable for locating areas of cave sediments at the surface and to determine their spatial extent, which is very important in delineating the geometry of unroofed cave systems. GPR thus proved to be a very valuable method in supporting geological and geomorphological mapping for a more comprehensive recognition of unroofed cave systems. These are important for understanding karstification and speleogenetic processes that influenced the formation of former underground caves and can help us reconstruct the direction of former underground water flows.
The Ljubljana Moor basin is characterized by moderate bedrock topography and thicknesses of Quaternary lacustrine and fluvial sediments ranging from 0 to 200 m. More than 65 boreholes which reached ...the bedrock were drilled in the area, but their distribution in the basin is very uneven and some data from the boreholes uncertain. There are also no data on S-velocity distribution within the basin, but seismic refraction measurements pointed out a rather uniform increase of P-velocity with depth, great impedance contrast with the bedrock and relatively small lateral velocity variations. The microtremor horizontal-to-vertical spectral ratio (HVSR) method was therefore applied as a complementary tool to seismic refraction survey to map the thickness of sediments. First, microtremors were measured at the locations of boreholes which reached the bedrock and the resonance frequencies determined. The inverse power relationship between the resonance frequency and the thickness of sediments was then determined from 53 data pairs. The quality of the correlation is moderate due to possible heterogeneities in sediments and possible 3D effects in some minor areas, but the obtained parameters correspond well to the values obtained in six other European basins. Secondly, a 16 km-long discontinuous seismic refraction profile was measured across the whole basin, leaving uncovered some larger segments where active seismic measurements were not possible. Microtremors were then measured at 64 locations along the same profile, using 250 m point spacing, without leaving any gaps. The frequency–thickness relationship was used to invert resonance frequencies to depths. These were first validated using the results of the seismic refraction survey, which showed good agreement, and finally used for interpolation in the segments of missing refraction data to obtain a continuous depth profile of the bedrock. The study has shown that the microtremor method can be used as a complementary tool for mapping the thickness of unconsolidated sediments also in areas characterized by moderate bedrock topography. As the input data are always to some extent uncertain, it is important to have a sufficiently large number of borehole data to establish a frequency–thickness relationship, as well as some additional independent geophysical information for its validation.
High frequency ground penetrating radar (GPR) is usually applied for cavities detection in a shallow subsurface of karst areas to prevent geotechnical hazards. For specific projects, such as tunnel ...construction, it is important to detect also larger voids at medium depth range. However, dimensions of classical rigid low frequency antennas seriously limit their applicability in a rough terrain with dense vegetation commonly encountered in a karst. In this study recently developed 50 MHz antennas designed in a tube form were tested to detect cave gallery at the depth between 12 m and 60 m. The Divaca cave was selected because of a wide range of depths under the surface, possibility of unknown galleries in the vicinity and a rough terrain surface typical for Slovenian karst. Seven GPR profiles were measured across the main gallery of the cave and additional four profiles NE of the cave entrance where no galleries are known. Different acquisition and processing parameters were analysed together with the data resolution issues. The main gallery of the cave was clearly imaged in the part where the roof of the gallery is located at the depth from 10 m to 30 m. The width of the open space is mainly around 10 m. Applied system was not able to detect the gallery in the part where it is located deeper than 40 m, but several shallower cavities were discovered which were unknown before. The most important result is that the profiles acquired NE of the cave entrance revealed very clearly the existence of an unknown gallery which is located at the depth between 15 m and 22 m and represents the continuation of the Divaca cave. Access to this gallery is blocked by the sediment fill in the entrance shaft of the cave. The results of the study are important also for future infrastructure projects which will involve construction of tunnels through karstified limestone and for speleological investigations to direct the research efforts.Keywords: ground penetrating radar, cavity detection, spatial resolution, limestone, Divača cave.
Results are presented of the first airborne LiDAR survey ever flown in Europe for the purpose of mapping the surface expression of earthquake‐prone faults. Detailed topographic images derived from ...LiDAR data of the Idrija and Ravne strike‐slip faults in NW Slovenia reveal geomorphological and structural features that shed light on the overall architecture and kinematic history of both fault systems. The 1998 MW = 5.6, and 2004 MW = 5.2 Ravne Fault earthquakes and the historically devastating 1511 M = 6.8 Idrija earthquake indicate that both systems pose a serious seismic hazard in the region. Because both fault systems occur within forested terrain, a tree removal algorithm was applied to the data; the resulting images reveal surface scarps and tectonic landforms in unprecedented detail. Importantly, two sites were discovered to be potentially suitable for fault trenching and palaeo‐seismological analysis. This study highlights the potential contribution of LiDAR surveying in both low‐relief valley terrain and high‐relief mountainous terrain to a regional seismic hazard assessment programme. Geoscientists working in other tectonically active regions of the world where earthquake‐prone faults are obscured by forest cover would also benefit from LiDAR maps that have been processed to remove the canopy return and reveal the forest floor topography.
PDF
