Dependent on the excretion pattern, wastewater monitoring of viruses can be a valuable approach to characterizing their circulation in the human population. Using polyethylene glycol precipitation ...and reverse transcription-quantitative PCR, the occurrence of RNA of SARS-CoV-2 and influenza viruses A/B in the raw wastewater of two treatment plants in Germany between January and May 2022 was investigated. Due to the relatively high incidence in both exposal areas (plant 1 and plant 2), SARS-CoV-2-specific RNA was determined in all 273 composite samples analyzed (concentration of E gene: 1.3 × 10
to 3.2 × 10
gc/L). Despite a nation-wide low number of confirmed infections, influenza virus A was demonstrated in 5.2% (concentration: 9.8 × 10
to 8.4 × 10
gc/L; plant 1) and in 41.6% (3.6 × 10
to 3.0 × 10
gc/L; plant 2) of samples. Influenza virus B was detected in 36.0% (7.2 × 10
to 8.5 × 10
gc/L; plant 1) and 57.7% (9.6 × 10
to 2.1 × 10
gc/L; plant 2) of wastewater samples. The results of the study demonstrate the frequent detection of two primary respiratory viruses in wastewater and offer the possibility to track the epidemiology of influenza by wastewater-based monitoring.
Wastewater treatment plants represent relevant point sources of environmental-adverse pharmaceuticals in river systems. Extensive monitoring and substance-routing models are crucial for environmental ...risk assessment and river planning. However, most current models assume long-term and large spatial averaged values of pharmaceutical consumption and river discharge flows. This study describes a detailed tracking of pharmaceutical occurrence across river networks with high spatiotemporal resolution to assist better environmental risk assessments. Using high spatiotemporal prescription data of four (pseudo-) persistent pharmaceuticals and river discharge characterization, an adjusted graph-theory-based model was implemented to efficiently evaluate the impact of the effluents of 626 wastewater treatment plants across nine river networks located in Saxony, Germany. Multisite calibration results demonstrated the model capability to satisfactorily predict daily pharmaceutical loads and concentrations with high spatial discretization. Based on minimal river dilution and mean predicted concentrations, the risk exposure revealed carbamazepine and ciprofloxacin as the most critical pharmaceuticals and Vereinigte Mulde as the most risk-exposed river network with up to 34.0% and 23.7% of its river length exceeding half and the total of ecotoxicological criteria, respectively. In comparison, other river networks showed less than 23.5% and 15.0% of their river lengths exceeding half and the total of ecotoxicological criteria of all four selected pharmaceuticals, respectively.
The European Union Water Framework Directive (2000/60/EC; WFD) aims to achieve a good ecological and chemical status of all bodies of surface water by 2027. The development of integrated guidance on ...surface water chemical monitoring (e.g., WFD Guidance Document No. 7/19) has been transferred into national German law (Ordinance for the Protection of Surface Waters, OGewV). For the majority of compounds, this act requires monthly sampling to assess the chemical quality status of a body of surface water. To evaluate the representativeness of the sampling strategy under the OGewV, high-frequency online monitoring data are investigated under different sampling scenarios and compared with current, monthly grab sampling data. About 23 million data points were analyzed for this study. Three chemical parameters (dissolved oxygen, nitrate-nitrogen, and chloride concentration) and discharge data were selected from four catchments of different sizes, ranging from 51,391 km2 to 84 km2 (Elbe, Vereinigte Mulde, Neiße and two stations at Lockwitzbach). In this paper, we propose short-term online-monitoring (STOM) as a sampling alternative. STOM considers the placement of online sensors over a limited duration and return interval. In general, we: (I) compare the results of conventional grab sampling with STOM, (II) investigate the different performance of STOM and grab sampling using discharge data as a proxy for analyzing event-mobilized pollutants, and (III) investigate the related uncertainties and costs of both sampling methods. Results show that STOM outperforms grab sampling for parameters where minimum/maximum concentrations are required by law, as the probability of catching a single extreme value is higher with STOM. Furthermore, parameters showing a pronounced diurnal pattern, such as dissolved oxygen, are also captured considerably better. The performance of STOM showed no substantial improvements for parameters with small concentration variability, such as nitrogen-nitrate or chloride. The analysis of discharge events as a proxy parameter for event-mobilized pollutants proves that the probability of capturing samples during events is significantly increased by STOM.
The fluvial nitrogen dynamics at locations around weirs are still rarely studied in detail. Eulerian data, often used by conventional river monitoring and modelling approaches, lags the spatial ...resolution for an unambiguous representation. With the aim to address this knowledge gap, the present study applies a coupled 1D hydrodynamic–water quality model to a 26.9 km stretch of an upland river. Tailored simulations were performed for river sections with water retention and free-flow conditions to quantify the weirs’ influences on nitrogen dynamics. The water quality data were sampled with Eulerian and Lagrangian strategies. Despite the limitations in terms of required spatial discretization and simulation time, refined model calibrations with high spatiotemporal resolution corroborated the high ammonification rates (0.015 d−1) on river sections without weirs and high nitrification rates (0.17 d−1 ammonium to nitrate, 0.78 d−1 nitrate to nitrite) on river sections with weirs. Additionally, using estimations of denitrification based on typical values for riverbed sediment as a reference, we could demonstrate that in our case study, weirs can improve denitrification substantially. The produced backwater lengths can induce a means of additional nitrogen removal of 0.2-ton d−1 (10.9%) during warm and low-flow periods.
Identifying the location and estimating the magnitude of urban pluvial flooding events is essential to assess their impacts, particularly in areas where data are unavailable. The present work focused ...on developing and exemplifying a tool to evaluate urban pluvial flooding based on open-access information. The tool has three separate submodules: (1) sewer network generation and design; (2) hydrodynamic model development; (3) urban pluvial flood evaluation. Application of the first two modules in two catchments and comparison of these results with real data indicated that the tool was able to generate systems with realistic layouts and hydraulic properties. Hydrodynamic models derived from this data were able to simulate realistic flow dynamics. The third module was evaluated for one of the study cases. The results of this indicated that the current approach could be used to identify flood areas and associated flood depths during different rainfall scenarios. The outcomes of this study could be used in a wide variety of contexts. For example, it could provide information in areas with data scarcity or uncertainty or serve as a tool for prospective planning, design, and decision making.
Urban pluvial floods (UPFs) are a threat that is expected to increase with economic development, climate change, and the proliferation of urban cover worldwide. Methods to assess the spatiotemporal ...magnitude of UPFS and their impacts are needed to research and explore mitigation measures. This study presents a method for the assessment of UPFs and their impacts by combining a hydrodynamic sewer system model with a GIS-based overland diffusive flow algorithm. The algorithm is implemented in the software GIS-based Agent-based Modeling Architecture (GAMA) along with the depth-damage functions and land use data to estimate financial impacts. The result is a dynamic and interactive model that allows the user to monitor the events in real-time. Functionality is demonstrated in a case study in Dresden, Germany and with ten to 100-year design storms. The majority of flood extents and damages occur in the early stages of the event. Sewer surcharge emerges from few of the manholes, suggesting early action vitally reduces flood risks and interventions at a few hot spots, largely reducing impacts. Flood protection barriers were interactively implemented as a potential response measure in the hot spot areas reducing the damage by up to 90%. The user can compare different parameters in a visually compelling way that can lead to a better understanding of the system and more efficient knowledge transfer.
Introduction
Urban pluvial flooding is a growing concern worldwide as consequence of rising urban population and climate change induced increases in heavy rainfall. Easy-to-implement and fast ...simulation tools are needed to cope with this challenge.
Methods
This study describes the development of the parsimonious, GPU-accelerated hydraulic model
RIM2D
for urban pluvial flood simulations. This is achieved by considering the built-up urban area as flow obstacles, and by introducing capacity-based approaches to consider urban drainage by infiltration on pervious surfaces and sewer drainage from roofs and sealed surfaces. The model performance was analyzed by simulating 8 heavy rainfall events in a test area in the city of Dresden, Germany. For these events detailed discharge measurements of sewer discharge are available, providing a unique dataset for evaluating the sewer drainage simulation, which is of high importance for realistic pluvial inundation simulations in urban areas.
Results and discussion
We show that the model simulates the temporal dynamics of the sewer discharge and the sewer volume within acceptable ranges. Moreover, the erratic variation of the simulated to measured sewer discharge suggests that the deviations from the measurements are caused by the precipitation input rather than the model simplifications. We conclude that
RIM2D
is a valid tool for urban inundation simulation. Its short simulation runtimes allow probabilistic flood risk assessments and operational flood forecasts.
Use of wastewater-based epidemiology as a tool to record and manage the course of SARS-CoV-2 infections in human populations requires information about the efficiency of methods to concentrate the ...virus from wastewater. In the present study, we spiked untreated wastewater with quantified SARS-CoV-2 positive clinical material and enriched the virus by polyethylene glycol precipitation and ultrafiltration with Vivaspin 10 kDa MWCO columns. SARS-CoV-2 was detected and quantified by reverse transcription quantitative PCR (E- and S-gene) and droplet digital PCR. The concentration of virus with precipitation resulted in mean recoveries between 59.4% and 63.7% whereas rates from 33.0% to 42.6% after ultrafiltration of samples were demonstrated. The results suggest that the use of both methods allows an effective and practicable enrichment of SARS-CoV-2 from raw wastewater.
Although river water quality monitoring (WQM) networks play an important role in water management, their effectiveness is rarely evaluated. This study aims to evaluate and optimize water quality ...variables and monitoring sites to explain the spatial and temporal variation of water quality in rivers, using principal component analysis (PCA). A complex water quality dataset from the Freiberger Mulde (FM) river basin in Saxony, Germany was analyzed that included 23 water quality (WQ) parameters monitored at 151 monitoring sites from 2006 to 2016. The subsequent results showed that the water quality of the FM river basin is mainly impacted by weathering processes, historical mining and industrial activities, agriculture, and municipal discharges. The monitoring of 14 critical parameters including boron, calcium, chloride, potassium, sulphate, total inorganic carbon, fluoride, arsenic, zinc, nickel, temperature, oxygen, total organic carbon, and manganese could explain 75.1% of water quality variability. Both sampling locations and time periods were observed, with the resulting mineral contents varying between locations and the organic and oxygen content differing depending on the time period that was monitored. The monitoring sites that were deemed particularly critical were located in the vicinity of the city of Freiberg; the results for the individual months of July and September were determined to be the most significant. In terms of cost-effectiveness, monitoring more parameters at fewer sites would be a more economical approach than the opposite practice. This study illustrates a simple yet reliable approach to support water managers in identifying the optimum monitoring strategies based on the existing monitoring data, when there is a need to reduce the monitoring costs.
Urban pluvial flooding occurs when the capacity of sewer networks is surcharged due to large amounts runoff produced during intense rain events. Rapid urbanization processes and changes in climate ...increase these events frequency. Effective and sustainable approaches for the reduction in urban floods are necessary. Although several gray, green and hybrid measures have been studied, the influence of network structure on flood occurrence has not yet been systematically evaluated. This study focuses on evaluating how different structures of a single urban drainage network affect flood volumes and their associated damages. Furthermore, a cost–benefit analysis is used to determine the best network structure. As a case study, a sewer subnetwork in Dresden, Germany was selected. Scenarios corresponding to different layouts are developed and evaluated using event-wise hydrodynamic simulation. The results indicate that more meshed structures are associated with lower flood volumes and damage. Moreover, all analyzed scenarios were identified as cost-effective, i.e., the benefits in terms of flood damage reduction outweighed the costs related to pipe installation, operation and maintenance. However, a predominantly branched structure was identified as the best scenario. The present approach may provide a new cost-effective solution that can be integrated into the development of different mitigation strategies for flood management.