•There is a major environmental issue about the printed circuit boards throughout the world.•Different physical and chemical recycling techniques have been reviewed.•Nonmetallic fraction of PCBs is ...the unwanted face of this waste stream.•Several applications of the nonmetallic fraction of waste PCBs have been introduced.
E-waste, in particular waste PCBs, represents a rapidly growing disposal problem worldwide. The vast diversity of highly toxic materials for landfill disposal and the potential of heavy metal vapors and brominated dioxin emissions in the case of incineration render these two waste management technologies inappropriate. Also, the shipment of these toxic wastes to certain areas of the world for eco-unfriendly “recycling” has recently generated a major public outcry. Consequently, waste PCB recycling should be adopted by the environmental communities as an ultimate goal.
This article reviews the recent trends and developments in PCB waste recycling techniques, including both physical and chemical recycling. It is concluded that the physical recycling techniques, which efficiently separate the metallic and nonmetallic fractions of waste PCBs, offer the most promising gateways for the environmentally-benign recycling of this waste. Moreover, although the reclaimed metallic fraction has gained more attention due to its high value, the application of the nonmetallic fraction has been neglected in most cases. Hence, several proposed applications of this fraction have been comprehensively examined.
Polyhydroxyalkanoates (PHA), especially poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is considered as the most suitable candidate to replace petrochemical plastics. However, the high ...production cost and the composition of the monomers in the copolymer are the major constraints in production. The 3-hydroxyvalerate (3HV) rich copolymers are ideal for various applications due to their lower melting points, improved elasticity, and ductility. Haloferax mediterranei is a suitable microorganism for the production of biopolymer PHBV from biowaste. Nevertheless, the potential of H. mediterranei cultivated on food waste as sustainable substrate and levulinic acid as an inducer has not been explored for PHBV production. This study aims at the valorization of food waste as low-cost substrate and evaluation of effect of levulinic acid in the production and composition of PHBV using H. mediterranei. Shake-flask fermentations using different concentrations of salt, glucose and levulinic acid were first performed to optimize the cultivation conditions. The highest growth of the halophile was observed at salt concentration of 15% and glucose of concentration 10 g/L. Under optimized growth conditions, H. mediterranei was cultivated for PHBV production in fed-batch bioreactor with pulse fed levulinic acid. The maximum biomass of 3.19 ± 0.66 g/L was achieved after 140 h of cultivation with 3 g/L of levulinic acid. A decrease in H. mediterranei growth was noticed with the increase in levulinic acid concentration in the range of 3–10 g/L. The overall yield of PHBV at 3, 5, 7 and 10 g/L of levulinic acid were 18.23%, 56.70%, 31.54%, 21.29%, respectively. The optimum concentration of 5 g/L of levulinic acid was found to produce the maximum yield of 56.70% PHBV with 18.55 mol% 3HV content. A correlation between levulinic acid concentrations and PHBV production established in this study can serve as an important reference for future large-scale production.
•PHA production from food waste hydrolysate by Haloferax mediterranei.•Levulinic acid influences PHBV content, composition and biomass in fed-batch mode.•The maximum of 56.70% PHBV and 18.55 mol% 3HV were obtained at 5 g/L levulinic acid.•Levulinic acid at 10 g/L suppressed the bacterial growth to 2.31 g/L in bioreactor.•Correlation between levulinic acid concentration and PHA production was established.
•Environmental impacts of electronic waste and specifically waste printed circuit boards.•Review of the recycling techniques of waste printed circuit boards.•Advantages of physico-mechanical ...recycling techniques over chemical methods.•Utilization of nonmetallic fraction of waste printed circuit boards as modifier/filler.•Recent advances in the use of nonmetallic fraction of waste printed circuit boards as precursor.
Electronic waste, including printed circuit boards, is growing at an alarming rate due to the accelerated technological progress and the shorter lifespan of the electronic equipment. In the past decades, due to the lack of proper economic and environmentally-benign recycling technologies, a major fraction of e-waste generated was either destined to landfills or incinerated with the sole intention of its disposal disregarding the toxic nature of this waste. Recently, with the increasing public awareness over their environment and health issues and with the enaction of more stringent regulations, environmentally-benign recycling has been driven to be an alternative option partially replacing the traditional eco-unfriendly disposal methods. One of the most favorable green technologies has been the mechanical separation of the metallic and nonmetallic fraction of the waste printed circuit boards. Although metallic fraction, as the most profitable component, is used to generate the revenue of the separation process, the nonmetallic fraction (NMF) has been left isolated. Herein, the recent developments in the application of NMF have been comprehensively reviewed and an eco-friendly emerging usage of NMF as a value-added material for sustainable remediation has been introduced.
► We report a microwave-assisted methodology for agar extraction from Gracilaria gracilis. ► The biopolymer could be transformed into a novel family of mesoporous materials. ► They could be used as ...templates for the production of nanocrystals of metal oxides.
Porous agar materials have been prepared from marine macroalgae species using a simple microwave-assisted extraction/drying methodology, providing a new family of polysaccharide derived porous solids. The microwave-assisted extraction allows a more efficient and less time-consuming extraction of the polysaccharide compared to conventional extraction protocols based on conventional heating. DRIFT and 13C NMR results indicated that the internal agar structure (based on d-galactose and 3,6-anhydro-l-galactose linked units) was preserved after the extraction methodology, which opens a wide range of future possibilities and applications for this new family of porous polysaccharides. The extracted agar materials, which have already applications per se due to their high purities, could be subsequently transformed into a novel family of attractive mesoporous agar materials that could be used as natural templates for the production of nanocrystals of metal oxides.
During the COVID-19 pandemic, WHO and CDC suggest people stay 1 m and 1.8 m away from others, respectively. Keeping social distance can avoid close contact and mitigate infection spread. Many ...researchers suspect that suggested distances are not enough because aerosols can spread up to 7–8 m away. Despite the debate on social distance, these social distances rely on unobstructed respiratory activities such as coughing and sneezing. Differently, in this work, we focused on the most common but less studied aerosol spread from an obstructed cough. The flow dynamics of a cough jet blocked by the backrest and gasper jet in a cabin environment was characterized by the particle image velocimetry (PIV) technique. It was proved that the backrest and the gasper jet can prevent the front passenger from droplet spray in public transportation where maintaining social distance was difficult. A model was developed to describe the cough jet trajectory due to the gasper jet, which matched well with PIV results. It was found that buoyancy and inside droplets almost do not affect the short-range cough jet trajectory. Infection control measures were suggested for public transportation, including using backrest/gasper jet, installing localized exhaust, and surface cleaning of the backrest.
•Keeping social distance in public transportation is difficult, meaning high risk.•Flow dynamics of cough jet in a cabin environment is studied by PIV technique.•Backrest and gasper jet can be compensation for not keeping social distance.•Localized exhaust under each seat is suggested to timely remove bulk aerosols.•A universal model is proposed to predict the obstructed cough jet trajectory.
Returning biochar to fields: A review Tan, Zhongxin; Lin, Carol S.K.; Ji, Xiaoyan ...
Applied soil ecology : a section of Agriculture, ecosystems & environment,
08/2017, Volume:
116
Journal Article
Peer reviewed
•There is a disconnect between biochar preparation and its returning.•Return biochar from directional function for soil to directional preparation.•Returning biochar can improve the soil physical and ...chemical properties.•Returning biochar can improve the activity of soil microbes.•Returning biochar can reduce the emission of greenhouse gas.
Biochar generated from thermochemical conversion of biomass reduces greenhouse gas emissions and is useful for improving ecological systems in agriculture. However, certain biochars function well in improving soil, and other biochars do not. Why? Because it is not clear how to prepare the best biochar for soil. There is a disconnect between biochar preparation and returning the biochar to the soil. To elucidate this relationship, this paper reviews (i) technologies for preparing biochar, (ii) how preparation conditions affect biochar properties, and (iii) the effects on soil physical and chemical properties. In addition to reducing greenhouse gas emissions, biochar improves the physicochemical and microbial properties of soil and absorbs poisonous and pernicious substances. Therefore, as biochar is produced by pyrolysis, optimizing processing conditions to improve its properties for agricultural use is a key issue explored in this article.
Display omitted
•Low productivity caused expensive production cost of biobased succinic acid (SA).•High productivity contributes to reduction in process cost.•Increasing glycerol uptake rate and SA ...productivity by overexpression of gene GUT1.•The process duration to yield the highest concentration of SA was reduced by 9%.•Overexpression strain developed cost effective and efficient SA production process.
Development of cost effective and highly efficient process for bio-based succinic acid (SA) production is a main concern for industry. The metabolically engineered Y. lipolytica strain PGC01003 was successfully used for SA production with high titre. However, this strain possesses as main drawback with a low growth rate when glycerol is used as a feedstock. Herein, gene GUT1, encoding glycerol kinase, was overexpressed in strain PGC01003 with the aim to improve glycerol uptake capacity. In the resulting strain RIY420, glycerol uptake was 13.5% higher than for the parental strain. GUT1 gene overexpression also positively influences SA production. In batch bioreactor, SA titre, yield and productivity were 32%, 39% and 143% higher, respectively, than for the parental strain PGC01003. Using a glycerol feeding strategy, SA titre, yield and productivity were further improved by 11%, 5% and 10%, respectively. Moreover, the process duration to yield the highest concentration of SA in the culture supernatant was reduced by 9%. This demonstrated the contribution of metabolically engineered strain RIY420 to lower SA process cost and increase the efficiency of bio-based SA production.
Sugar alcohols and organic acids that derive from the metabolism of certain microorganisms have a panoply of applications in agro-food, chemical and pharmaceutical industries. The main challenge in ...their production is to reach a productivity threshold that allow the process to be profitable. This relies on the construction of efficient cell factories by metabolic engineering and on the development of low-cost production processes by using industrial wastes or cheap and widely available raw materials as feedstock. The non-conventional yeast
has emerged recently as a potential producer of such metabolites owing its low nutritive requirements, its ability to grow at high cell densities in a bioreactor and ease of genome edition. This review will focus on current knowledge on the synthesis of the most important sugar alcohols and organic acids in
.