Lipid-polymer hybrid nanoparticles (LPHNP) are delivery systems for controlled drug delivery at tumor sites. The superior biocompatible properties of lipids and structural advantages of polymers can ...be obtained using this system for controlled drug delivery. In this study, cisplatin-loaded lipid-chitosan hybrid nanoparticles were formulated by the single step ionic gelation method based on ionic interaction of positively charged chitosan and negatively charged lipid. Formulations with various chitosan to lipid ratios were investigated to obtain the optimal particle size, encapsulation efficiency, and controlled release pattern. Transmission electron microscope and dynamic light scattering analysis demonstrated a size range of 181-245 nm and a zeta potential range of 20-30 mV. The stability of the formulation was demonstrated by thermal studies. Cytotoxicity and cellular interaction of cisplatin-loaded LPHNP were investigated using in vitro cell-based assays using the A2780 ovarian carcinoma cell line. The pharmacokinetics study in rabbits supported a controlled delivery of cisplatin with enhanced mean residence time and half-life. These studies suggest that cisplatin loaded LPHNP have promise as a platform for controlled delivery of cisplatin in cancer therapy.
Lipid polymer hybrid nanoparticles (LPHNPs) for the controlled delivery of hydrophilic doxorubicin hydrochloride (DOX.HCl) and lipophilic DOX base have been fabricated by the single step modified ...nanoprecipitation method.
Poly (D, L-lactide-co-glicolide) (PLGA), lecithin, and 1,2-distearoyl-Sn-glycero-3-phosphoethanolamine-N-methoxy (polyethylene glycol)-2000 (DSPE-PEG 2000) were selected as structural components.
The mean particle size was 173-208 nm, with an encapsulation efficiency of 17.8±1.9 to 43.8±4.4% and 40.3±0.6 to 59. 8±1.4% for DOX.HCl and DOX base, respectively. The drug release profile was in the range 33-57% in 24 hours and followed the Higuchi model (R
=0.9867-0.9450) and Fickian diffusion (n<0.5). However, the release of DOX base was slower than DOX.HCl. The in vitro cytotoxicity studies and confocal imaging showed safety, good biocompatibility, and a higher degree of particle internalization. The higher internalization of DOX base was attributed to higher permeability of lipophilic component and better hydrophobic interaction of particles with cell membranes. Compared to the free DOX, the DOX.HCl and DOX base loaded LPHNPs showed higher antiproliferation effects in MDA-MB231 and PC3 cells.
Therefore, LPHNPs have provided a potential drug delivery strategy for safe, controlled delivery of both hydrophilic and lipophilic form of DOX in cancer cells.
The tumor-specific targeting of chemotherapeutic agents for specific necrosis of cancer cells without affecting the normal cells poses a great challenge for researchers and scientists. Though ...extensive research has been carried out to investigate chemotherapy-based targeted drug delivery, the identification of the most promising strategy capable of bypassing non-specific cytotoxicity is still a major concern. Recent advancements in the arena of onco-targeted therapies have enabled safe and effective tumor-specific localization through stimuli-responsive drug delivery systems. Owing to their promising characteristic features, stimuli-responsive drug delivery platforms have revolutionized the chemotherapy-based treatments with added benefits of enhanced bioavailability and selective cytotoxicity of cancer cells compared to the conventional modalities. The insensitivity of stimuli-responsive drug delivery platforms when exposed to normal cells prevents the release of cytotoxic drugs into the normal cells and therefore alleviates the off-target events associated with chemotherapy. Contrastingly, they showed amplified sensitivity and triggered release of chemotherapeutic payload when internalized into the tumor microenvironment causing maximum cytotoxic responses and the induction of cancer cell necrosis. This review focuses on the physical stimuli-responsive drug delivery systems and chemical stimuli-responsive drug delivery systems for triggered cancer chemotherapy through active and/or passive targeting. Moreover, the review also provided a brief insight into the molecular dynamic simulations associated with stimuli-based tumor targeting.
Liposomes are lipid based vesicular systems that offer novel platform for versatile drug delivery to target cell. Liposomes were first reported by Bangham and his co-workers in 1964 (1). Since then, ...liposomes have undergone extensive research with the prime aim to optimize encapsulation, stability, circulation time and target specific drug delivery. Manipulation of a liposome's lipid bilayer and surface decoration with selective ligands has transformed conventional liposomes into adaptable and multifunctional liposomes. Development of liposomes with target specificity provide the prospect of safe and effective therapy for challenging clinical applications. Bioresponsive liposomes offer the opportunity to release payload in response to tissue specific microenvironment. Incorporation of novel natural and synthetic materials has extended their application from stable formulations to controlled release targeted drug delivery systems. Integration and optimization of multiple features into one system revolutionized research in the field of cancer, gene therapy, immunotherapy and infectious diseases. After 50 years since the first publication, this review is aimed to highlight next generation of liposomes, their preparation methods and progress in clinical applications.
Summary
In late December 2019, a group of patients was observed with pneumonia‐like symptoms that were linked with a wet market in Wuhan, China. The patients were found to have a novel coronavirus ...genetically related to a bat coronavirus that was termed SARS‐CoV‐2. The virus gradually spread worldwide and was declared a pandemic by WHO. Scientists have started trials on potential preventive and treatment options. Currently, there is no specific approved treatment for SARS‐CoV‐2, and various clinical trials are underway to explore better treatments. Some previously approved antiviral and other drugs have shown some in vitro activity. Here we summarize the fight against this novel coronavirus with particular focus on the different treatment options and clinical trials exploring treatment as well as work done toward development of vaccines.
The present study is associated with the development of proliposomes and liposomal derived gel for enhanced solubility and permeability of diacerein. Proliposomes were developed by thin film ...hydration method and converted into the liposomal derived gel using carbopol-934 as a gelling agent. Formulations with varied lecithin to cholesterol ratios were investigated to obtain the optimal size, entrapment efficiency, and enhanced in vitro dissolution. Dynamic light scattering analysis revealed the particle size and zeta potential in the range of 385.1±2.45-762.8±2.05 nm and -22.4±0.55-31.2±0.96mV respectively. Fourier transform infrared (FTIR) spectroscopic analysis depicted the physicochemical compatibility, powdered x-ray diffraction (PXRD) analysis predicted the crystalline nature of pure drug and its transition into amorphous form within formulation. The differential scanning calorimetry (DSC) demonstrated the thermal stability of the formulation. The in vitro drug release study using dialysis membrane displayed the enhanced dissolution of diacerein due to the presence of hydrophilic carrier (Maltodextrin) followed by sustained drug release due to the presence of lipid mixture (lecithin and cholesterol). Ex vivo permeation studies depicted 3.50±0.27 and 3.21±0.22 folds enhanced flux of liposomal gels as compared to control. The acute oral toxicity study showed safety and biocompatibility of the system as no histopathological changes in vital organs were observed. These results suggests that proliposomes and liposomal derived gel are promising candidates for the solubility and permeability enhancement of diacerein in the management of osteoarthritis.
In this article, formulation studies for terbinafine hydrochloride nanoemulsions, prepared by high-energy ultrasonication technique, are described. Pseudo-ternary phase diagram was constructed in ...order to find out the optimal ratios of oil and surfactant/co-solvent mixture for nanoemulsion production. Clove and olive oils were selected as oil phase. Based on the droplet size evaluation, maximum nanoemulsion region were determined for formulation development. Further characterization included polydispersity index (PDI), zeta potential, Fourier transform infrared (FT-IR) spectroscopy, morphology, pH, viscosity, refractive index, ex vivo skin permeation, skin irritation, and histopathological examination. Droplet sizes of optimized formulations were in colloidal range. PDI values below 0.35 indicated considerably homogeneous nanoemulsions. Zeta potential values were from 13.2 to 18.1 mV indicating good stability, which was also confirmed by dispersion stability studies. Ex vivo permeation studies revealed almost total skin permeation of terbinafine hydrochloride from the nanoemulsions (96-98%) in 6 hours whereas commercial product reached only 57% permeation at the same time. Maximum drug amounts were seen in epidermis and dermis layers. Skin irritation and histopathological examination demonstrated dermatologically safe formulations. In conclusion, olive oil and clove oil-based nanoemulsion systems have potential to serve as promising carriers for topical terbinafine hydrochloride delivery.
The present study aimed to prepare solid lipid-based nanoparticles (SLNs) using Precirol® ATO 5 as solid lipid and Poloxamer 188 and Tween 80 as surfactant and co-surfactant respectively, and ...SLNs-derived gel for sustained delivery, enhanced in-vitro cytotoxicity, enhanced cellular uptake of 5-FU and enhanced permeation of 5-FU across the skin. The 5-FU-loaded SLNs were prepared by the hot melt encapsulation method and converted into SLN-derived gel using a gelling agent (Carbopol 940). The 5-FU-loaded SLNs had a particle size in the range of 76.82±1.48 to 327±4.46 nm, zeta potential between -11.3±2.11 and -28.4±2.40 mV, and entrapment efficiency (%) in range of 63.46±1.13 and 76.08±2.42. The FTIR analysis depicted that there was no chemical interaction between 5-FU and formulation components. Differential scanning calorimetric analysis showed thermal stability of 5-FU in the nanoparticles and powdered X-ray diffraction analysis revealed successful incorporation of 5-FU in nanoparticles. The in-vitro release study of 5-FU-loaded SLNs showed biphasic release behavior with initial burst release followed by sustained release over 48 hr. The 5-FU-loaded SLNs showed a greater cytotoxic effect on skin melanoma (B16F10 cells) and squamous cell carcinoma (A-431 cells) as compared to free 5-FU drug solution after 48 hr. Flow cytometry and fluorescence microscopy displayed enhanced quantitative and qualitative cellular uptake of SLNs. The SLNs formulation showed acceptable safety and biocompatible profile after an acute toxicity study in Wistar rats. Moreover, ex-vivo permeation studies depicted 2.13±0.076 folds enhanced flux of 5-FU-loaded SLN derived gel compared to 5-FU plain gel, and skin retention studies revealed target efficiency (%) 2.54±0.03 of 5-FU-loaded SLN derived gel compared to 5-FU plain gel.
Desvenlafaxine (DES) and Alprazolam (ALP) are the drugs commonly prescribed together for the treatment of Major Depressive Disorders (MDD). A literature survey revealed, there is no method for the ...simultaneous determination of these two drugs. The purpose of this research was to develop and validate a simple, accurate, precise, robust, and isocratic RP-HPLC method for simultaneous determination of DES and ALP in human spiked plasma using UV-detector in short analysis time. The method utilized Hypersil BDS C18 (250 mmx4.6 mm, 5 mum) through an isocratic mode of elution using HPLC grade acetonitrile and 0.02M KH.sub.2 PO.sub.4 buffer (65:35) and 0.1% Tri Fluoro Acetic acid (TFA) with pH 4.00 adjusted with 1M KOH. The flow rate was 1.00 mLmin.sup.-1 and elution of the drugs was monitored at 230nm. The elution time of DES and ALP was 4.011 and 5.182 minutes respectively. The method was linear for the concentration range 10-150 mugmL.sup.-1 for DES and 5.0-75.0 mugmL.sup.-1 for ALP. According to the validation results, the method is sensitive with Limit of Detection (LOD) 4.740 mugmL.sup.-1 and Limit of Quantification (LOQ) of 14.365 mugmL.sup.-1 for DES and LOD 1.891 mugmL.sup.-1 LOQ 5.730 mugmL.sup.-1 for ALP. The reproducibility of results with minute deliberate variations in method parameters has proven that the method is robust. The data from stability studies show a non-significant change in drugs solutions for 2 months. The optimized method was validated as per International Conference for Harmonisation (ICH) Q2(R1) guidelines. This method can be used for the estimation of DES and ALP in plasma and can evaluate pharmacokinetic parameters of both drugs simultaneously.
Nanotechnology has opened a new horizon of research in various fields including applied physics, chemistry, electronics, optics, robotics, biotechnology and medicine. In the biomedical field, ...nanomaterials have shown remarkable potential as theranostic agents. Materials which are considered inert are often used in nanomedicine owning to their nontoxic profile. At nanoscale, these inert materials have shown unique properties that differ from bulk and dissolved counterparts. In the case of metals, this unique behavior not only imparts paramount advantages but also confers toxicity due to their unwanted interaction with different cellular processes. In the literature, the toxicity of nanoparticles made from inert materials has been investigated and many of these have revealed toxic potential under specific conditions. The surge to understand underlying mechanism of toxicity has increased and different means have been employed to overcome toxicity problems associated with these agents. In this review, we have focused nanoparticles of three inert metallic materials i.e. gold, silver and iron as these are regarded as biologically inert in the bulk and dissolved form. These materials have gained wider research interest and studies indicating the toxicity of these materials are also emerging. Oxidative stress, physical binding and interference with intracellular signaling are the major role player in nanotoxicity and their predominance is highly dependent upon size, surface coating and administered dose of nanoparticles. Current strategies to overcome toxicity have also been reviewed in the light of recent literature. The authors also suggested that uniform testing standards and well-designed studies are needed to evaluate nanotoxicity of these materials that are otherwise considered as inert. This article is open to POST-PUBLICATION REVIEW. Registered readers (see "For Readers") may comment by clicking on ABSTRACT on the issue's contents page.