A new and generic strategy to construct interwoven carbon nanotube (CNT) branches on various metal oxide nanostructure arrays (exemplified by V2O3 nanoflakes, Co3O4 nanowires, Co3O4–CoTiO3 composite ...nanotubes, and ZnO microrods), in order to enhance their electrochemical performance, is demonstrated for the first time. In the second part, the V2O3/CNTs core/branch composite arrays as the host for Na+ storage are investigated in detail. This V2O3/CNTs hybrid electrode achieves a reversible charge storage capacity of 612 mAh g−1 at 0.1 A g−1 and outstanding high‐rate cycling stability (a capacity retention of 100% after 6000 cycles at 2 A g−1, and 70% after 10 000 cycles at 10 A g−1). Kinetics analysis reveals that the Na+ storage is a pseudocapacitive dominating process and the CNTs improve the levels of pseudocapacitive energy by providing a conductive network.
Chemical vapor deposition synthesis of carbon nanotube (CNT) branches is demonstrated on four types of metal oxide arrays. High‐performance Na ion storage is proven in the V2O3/CNTs system long cycle stability and high rates.
All-solid-state lithium batteries (ASSLIBs) employing sulfide solid electrolyte hold high promise to replace traditional liquid-electrolyte LIBs due to their high safety and energy density. However, ...Li dendritic growth in sulfide electrolyte limits the realization of the high energy of ASSLIBs. In this work, we use LiF (or LiI) layer at the interface between Li and sulfide electrolyte and penetrated HFE (or I solution) inside of sulfide electrolyte to suppress the Li dendrite growth. Due to the higher interface energy of LiF/Li than that of LiI/Li, LiF interlayer show much higher capability than LiI in suppressing the Li dendrite. Even if the Li dendrite breaks through LiF (or LiI) interlayer, the Li dendrites will be consumed by coated/penetrated HEF (or I) forming LiF (or LiI) thus preventing Li dendrite growth. A LiNbO3 @LiCoO2/Li7P3S11/Li ASSLIB employing HFE coated/infiltrated Li7P3S11 glass-ceramic as electrolyte, and LiF coated Li metal as anode shows a high reversible discharge capacity of 118.9 mAh g−1 at 0.1 mA cm−2 and retains 96.8 mAh g−1 after 100 cycles. The designed solid electrolyte interphase between Li and solid electrolyte that has a high interface energy to Li provides new opportunity to commercialize the Li metal batteries.
We demonstrate that a uniform the LiF (or LiI) interfacial layer at Li/Li7P3S11 interface and infiltration of HFE (or I solution) into sulfide electrolyte can suppress the Li dendrite growth. Due to the modification, the assembled Li@LiF/Li7P3S11/LiF@Li symmetrical cell can stably plating/stripping at 0.5 mA cm−2 and 0.1 mAh cm−2 at 25 °C for over 200 cycles. Coupled with the LNO-LCO cathode, the all-solid-state Li@LiF/Li7P3S11/LNO@LCO full cell exhibits a high initial reversible capacity of 118.9 mAh g−1 with excellent cycling stability and high rate performances at room temperature. Display omitted
•Rational coating of LiF (or LiI) on Li enables stable interface.•Infiltrating HFE (or I) into electrolytes suppresses the growth of Li dendrites.•High interface energy of LiF/Li promotes a uniform Li deposition.•High electrochemical performance was achieved for the cell with Li@LiF and HFE.
Scrupulous design and smart hybridization of bespoke electrode materials are of great importance for the advancement of sodium ion batteries (SIBs). Graphene‐based nanocomposites are regarded as one ...of the most promising electrode materials for SIBs due to the outstanding physicochemical properties of graphene and positive synergetic effects between graphene and the introduced active phase. In this review, the recent progress in graphene‐based electrode materials for SIBs with an emphasis on the electrode design principle, different preparation methods, and mechanism, characterization, synergistic effects, and their detailed electrochemical performance is summarized. General design rules for fabrication of advanced SIB materials are also proposed. Additionally, the merits and drawbacks of different fabrication methods for graphene‐based materials are briefly discussed and summarized. Furthermore, multiscale forms of graphene are evaluated to optimize electrochemical performance of SIBs, ranging from 0D graphene quantum dots, 2D vertical graphene and reduced graphene oxide sheets, to 3D graphene aerogel and graphene foam networks. To conclude, the challenges and future perspectives on the development of graphene‐based materials for SIBs are also presented.
The recent progress of multiscale graphene‐based electrode materials for application in sodium ion batteries in respect of electrode design principle, preparation methods, characterization, synergistic effects, and electrochemical performance is reviewed, and future challenges and prospects of the field are presented.
Exploring advanced battery materials with fast charging/discharging capability is of great significance to the development of modern electric transportation. Herein we report a powerful synergistic ...engineering of carbon and deficiency to construct high-quality three/two-dimensional cross-linked Ti
Nb
O
@C composites at primary grain level with conformal and thickness-adjustable boundary carbon. Such exquisite boundary architecture is demonstrated to be capable of regulating the mechanical stress and concentration of oxygen deficiency for desired performance. Consequently, significantly improved electronic conductivity and enlarged lithium ion diffusion path, shortened activation process and better structural stability are realized in the designed Ti
Nb
O
@C composites. The optimized Ti
Nb
O
@C composite electrode shows fast charging/discharging capability with a high capacity of 197 mA h g
at 20 C (∼3 min) and excellent long-term durability with 98.7% electron and Li capacity retention over 500 cycles. Most importantly, the greatest applicability of our approach has been demonstrated by various other metal oxides, with tunable morphology, structure and composition.
In carbonate electrolytes, the organic–inorganic solid electrolyte interphase (SEI) formed on the Li‐metal anode surface is strongly bonded to Li and experiences the same volume change as Li, thus it ...undergoes continuous cracking/reformation during plating/stripping cycles. Here, an inorganic‐rich SEI is designed on a Li‐metal surface to reduce its bonding energy with Li metal by dissolving 4m concentrated LiNO3 in dimethyl sulfoxide (DMSO) as an additive for a fluoroethylene‐carbonate (FEC)‐based electrolyte. Due to the aggregate structure of NO3− ions and their participation in the primary Li+ solvation sheath, abundant Li2O, Li3N, and LiNxOy grains are formed in the resulting SEI, in addition to the uniform LiF distribution from the reduction of PF6− ions. The weak bonding of the SEI (high interface energy) to Li can effectively promote Li diffusion along the SEI/Li interface and prevent Li dendrite penetration into the SEI. As a result, our designed carbonate electrolyte enables a Li anode to achieve a high Li plating/stripping Coulombic efficiency of 99.55 % (1 mA cm−2, 1.0 mAh cm−2) and the electrolyte also enables a Li||LiNi0.8Co0.1Mn0.1O2 (NMC811) full cell (2.5 mAh cm−2) to retain 75 % of its initial capacity after 200 cycles with an outstanding CE of 99.83 %.
An inorganic‐rich solid electrolyte interphase (SEI) has been constructed on Li metal to promote dense Li growth with a Coulombic efficiency of 99.55 % in the carbonate electrolyte. It was synthesized on the surface of the Li‐metal anode using concentrated LiNO3 in dimethyl sulfoxide (DMSO) as an additive in the FEC‐based electrolyte, which participates in the primary Li+ solvation shell and promotes the reduction of NO3− ions to form the inorganic‐rich SEI.
The high performance of a pseudocapacitor electrode relies largely on a scrupulous design of nanoarchitectures and smart hybridization of bespoke active materials. We present a powerful two-step ...solution-based method for the fabrication of transition metal oxide core/shell nanostructure arrays on various conductive substrates. Demonstrated examples include Co(3)O(4) or ZnO nanowire core and NiO nanoflake shells with a hierarchical and porous morphology. The "oriented attachment" and "self-assembly" crystal growth mechanisms are proposed to explain the formation of the NiO nanoflake shell. Supercapacitor electrodes based on the Co(3)O(4)/NiO nanowire arrays on 3D macroporous nickel foam are thoroughly characterized. The electrodes exhibit a high specific capacitance of 853 F/g at 2 A/g after 6000 cycles and an excellent cycling stability, owing to the unique porous core/shell nanowire array architecture, and a rational combination of two electrochemically active materials. Our growth approach offers a new technique for the design and synthesis of transition metal oxide or hydroxide hierarchical nanoarrays that are promising for electrochemical energy storage, catalysis, and gas sensing applications.
We report a procedure to fabricate nanostructured Ni films via programmed electrochemical deposition from a choline-chloride-based ionic liquid at a high temperature of 90 °C. Three electrodeposition ...modes using constant voltage, pulse voltage, and reverse pulse voltage produce a variety of nanostructured Ni films with micro/nanobinary surface architectures, such as nanosheets, aligned nanostrips, and hierarchical flowers. The nanostructured Ni films possess face-centered cubic crystal structure. Amazingly, it is found that the electrodeposited Ni films deliver the superhydrophobic surfaces without any further modifications by low surface-energy materials, which might be attributed to the vigorous micro/nanobinary architectures and the surface chemical composition. The electrochemical measurements reveal that the superhydrophobic Ni film exhibit an obvious passivation phenomenon, which could provide enhanced corrosion resistance for the substrate in the aqueous solutions.
Defect engineering (doping and vacancy) has emerged as a positive strategy to boost the intrinsic electrochemical reactivity and structural stability of MnO2‐based cathodes of rechargeable aqueous ...zinc ion batteries (RAZIBs). Currently, there is no report on the nonmetal element doped MnO2 cathode with concomitant oxygen vacancies, because of its low thermal stability with easy phase transformation from MnO2 to Mn3O4 (≥300 °C). Herein, for the first time, novel N‐doped MnO2–x (N‐MnO2–x) branch arrays with abundant oxygen vacancies fabricated by a facile low‐temperature (200 °C) NH3 treatment technology are reported. Meanwhile, to further enhance the high‐rate capability, highly conductive TiC/C nanorods are used as the core support for a N‐MnO2–x branch, forming high‐quality N‐MnO2–x@TiC/C core/branch arrays. The introduced N dopants and oxygen vacancies in MnO2 are demonstrated by synchrotron radiation technology. By virtue of an integrated conductive framework, enhanced electron density, and increased surface capacitive contribution, the designed N‐MnO2–x@TiC/C arrays are endowed with faster reaction kinetics, higher capacity (285 mAh g−1 at 0.2 A g−1) and better long‐term cycles (85.7% retention after 1000 cycles at 1 A g−1) than other MnO2‐based counterparts (55.6%). The low‐temperature defect engineering sheds light on construction of advanced cathodes for aqueous RAZIBs.
With a facile hydrothermal process and subsequent low‐temperature (200 °C) NH3 treatment, N‐doped MnO2–x (N‐MnO2–x) branch arrays with concomitant oxygen vacancies are fabricated on conductive TiC/C backbones to form N‐MnO2–x@TiC/C core/branch arrays. By virtue of an integrated conductive framework, enhanced electron density, and increased surface capacitive contribution, the designed N‐MnO2–x@TiC/C arrays cathode exhibits excellent electrochemical performance in zinc ion batteries.
We have provided a brief review about biomass derived carbon materials and their applications for electrochemical energy storage.
Display omitted
•Provide a brief review about biomass derived carbon ...materials.•Address the pore formation mechanism on carbon materials.•Hierarchical porous carbon show high capacity and good cycles.•Demonstrate two effective pore formation methods on carbon.
Natural biomass-derived carbons have attracted great attention due to their interesting characteristics of naturally porous or hierarchical structured and heteroatom doping. In this review, the recent progress in the synthesis of naturally-derived carbon and their composite electrodes is summarized in detail. Advantages and disadvantages of different methods (e.g., chemical and physical activations) are discussed. In addition, we further address the pore formation mechanism on biomass-derived carbons. Furthermore, their applications for electrochemical energy storage in lithium ion batteries and sodium ion batteries are briefly reviewed and highlighted associated with their structural merits such as hierarchical porous structure, high conductivity as well as large surface area. Outlook of research trends on next-generation high-performance electrodes based on biomass-derived carbons is provided at the end.