The compliance of soft grippers contributes to their great superiority over rigid grippers in grasping irregularly shaped objects and forming soft contact with environments. Due to a relatively small ...pressure, soft grippers lack the stiffness required for wider applications. Particle jamming has been frequently reported as a means of stiffness control. Unlike previous research using vacuum for particle jamming, this paper proposes a novel passive particle jamming principle that does not need any vacuum power or other control means. The proposed method is by simply patching a silicone rubber soft actuator and a pack (made of strain-limiting membrane) of particles to form an integral gripping finger. The inflation of the soft actuator applies a pressure to the particle pack causing particles inside it to jam. A larger squeezing pressure will result in tighter particle jamming, thus increasing the stiffness of the finger. The stiffness of the finger is controllable as it is proportional to the actuator's air pressure, which has been verified by experiments in this research. The stiffness can increase more than six fold when air pressure changes from 20 to 80 kPa in the experimental studies. The reported discovery may enhance the capabilities of soft robotic grippers so that more robotic picking operations could be performed by soft grippers.
A key challenge in robotics is to create efficient methods for grasping objects with diverse shapes, sizes, poses, and properties. Grasping with hand-like end effectors often requires careful ...selection of hand orientation and finger placement. Here, we present a fingerless soft gripper capable of efficiently generating multiple grasping modes. It is based on a soft, cylindrical accordion structure containing coupled, parallel fluidic channels, which are controlled via pressure supplied from a single fluidic port. Inflation opens the gripper orifice for enveloping an object, while deflation allows it to produce grasping forces. The interior is patterned with a gecko-like skin that increases friction, enabling the gripper to lift objects weighing up to 20 N. Our design ensures that fragile objects, such as eggs, can be safely handled, by virtue of a wall buckling mechanism. In reverse, the gripper can be deflated to reach into an opening or orifice then inflated to grasp objects with handles or cavities. The gripper may also integrate a lip that enables it to form a seal and, upon inflating, to generate suction for lifting objects with flat surfaces. In this article, we describe the design and fabrication of this device and present an analytical model of its behavior when operated from a single fluidic port. In experiments, we demonstrate its ability to grasp diverse objects, and show that its performance is well described by our model. Our findings show how a fingerless soft gripper can efficiently perform a variety of grasping operations. Such devices could improve the ability of robotic systems to meet applications in areas of great economic and societal importance.
Advances in soft robotics, materials science, and stretchable electronics have enabled rapid progress in soft grippers. Here, a critical overview of soft robotic grippers is presented, covering ...different material sets, physical principles, and device architectures. Soft gripping can be categorized into three technologies, enabling grasping by: a) actuation, b) controlled stiffness, and c) controlled adhesion. A comprehensive review of each type is presented. Compared to rigid grippers, end‐effectors fabricated from flexible and soft components can often grasp or manipulate a larger variety of objects. Such grippers are an example of morphological computation, where control complexity is greatly reduced by material softness and mechanical compliance. Advanced materials and soft components, in particular silicone elastomers, shape memory materials, and active polymers and gels, are increasingly investigated for the design of lighter, simpler, and more universal grippers, using the inherent functionality of the materials. Embedding stretchable distributed sensors in or on soft grippers greatly enhances the ways in which the grippers interact with objects. Challenges for soft grippers include miniaturization, robustness, speed, integration of sensing, and control. Improved materials, processing methods, and sensing play an important role in future research.
A comprehensive review of soft robotic grippers is presented, covering device concepts, physical principles, materials, distributed sensing, and application areas. Advanced materials and soft components, in particular silicone elastomers, shape‐memory materials, and active polymers and gels, enable the development of lighter, simpler, and more universal grippers.
Cables are complex, high-dimensional, and dynamic objects. Standard approaches to manipulate them often rely on conservative strategies that involve long series of very slow and incremental ...deformations, or various mechanical fixtures such as clamps, pins, or rings. We are interested in manipulating freely moving cables, in real time, with a pair of robotic grippers, and with no added mechanical constraints. The main contribution of this paper is a perception and control framework that moves in that direction, and uses real-time tactile feedback to accomplish the task of following a dangling cable. The approach relies on a vision-based tactile sensor, GelSight, that estimates the pose of the cable in the grip, and the friction forces during cable sliding. We achieve the behavior by combining two tactile-based controllers: (1) cable grip controller, where a PD controller combined with a leaky integrator regulates the gripping force to maintain the frictional sliding forces close to a suitable value; and (2) cable pose controller, where an linear–quadratic regulator controller based on a learned linear model of the cable sliding dynamics keeps the cable centered and aligned on the fingertips to prevent the cable from falling from the grip. This behavior is possible with the use of reactive gripper fitted with GelSight-based high-resolution tactile sensors. The robot can follow 1 m of cable in random configurations within two to three hand regrasps, adapting to cables of different materials and thicknesses. We demonstrate a robot grasping a headphone cable, sliding the fingers to the jack connector, and inserting it. To the best of the authors’ knowledge, this is the first implementation of real-time cable following without the aid of mechanical fixtures. Videos are available at http://gelsight.csail.mit.edu/cable/
Performing dexterous manipulation of unknown objects with robot grippers without using high-fidelity contact sensors, active/sliding surfaces, or a priori workspace exploration is still an open ...problem in robot manipulation and a necessity for many robotics applications. In this paper we present a two-fingered gripper topology that enables an enhanced predefined in-hand manipulation primitive controlled without knowing the size, shape, or other particulars of the grasped object. The in-hand manipulation behavior, namely, the planar manipulation of the grasped body, is predefined thanks to a simple hybrid low-level control scheme and has an increased range of motion due to the introduction of an elastic pivot joint between the two fingers. Experimental results with a prototype clearly show the advantages and benefits of the proposed concept. Given the generality of the topology and in-hand manipulation principle, researchers and designers working on multiple areas of robotics can benefit from the findings.
Display omitted
•The state-of-the-art development on piezo-driven compliant microgripper is surveyed.•Performance indicators and classification of the microgrippers are introduced.•The design ...optimization and modeling methods are presented.•Position/force sensors and control strategies are discussed.•The review is helpful for reader to know the recent advances and research tendency.
The piezoelectric-actuated compliant microgripper (PEACM) plays an essential role in the application fields such as biomedical engineering, microelectronics, and optical engineering. As compared with other categories of grippers, PEACM exhibits the advantages of high accuracy of displacement, large power to weight ratio, low energy consumption, and fast response speed. This paper reviews the recent advances on performance indices, classification, structural composition, optimization and modeling method, and control of PEACM. First, the gripper's performance indices and classifications are elaborated, which is beneficial to determine the design goal. Then, the compliant mechanisms adopted in the microgripper design are discussed, including the flexible hinge, displacement amplifier, and guiding mechanism. In addition, the optimization and modeling methods of the microgripper are presented. Popular types of position/force sensors and different displacement/force control strategies employed in the microgripper are surveyed. Moreover, the prospect on future development trend of the PEACM is discussed. The paper provides the reader with an overview of the recent advances on PEACM design and also a guideline on further development of the microgripper.
A 3D-Printed Omni-Purpose Soft Gripper Tawk, Charbel; Gillett, Andrew; in het Panhuis, Marc ...
IEEE transactions on robotics,
2019-Oct., 2019-10-00, Volume:
35, Issue:
5
Journal Article
Peer reviewed
Open access
Numerous soft grippers have been developed based on smart materials, pneumatic soft actuators, and underactuated compliant structures. In this article, we present a three-dimensional (3-D) printed ...omni-purpose soft gripper (OPSOG) that can grasp a wide variety of objects with different weights, sizes, shapes, textures, and stiffnesses. The soft gripper has a unique design that incorporates soft fingers and a suction cup that operate either separately or simultaneously to grasp specific objects. A bundle of 3-D-printable linear soft vacuum actuators (LSOVA) that generate a linear stroke upon activation is employed to drive the tendon-driven soft fingers. The support, fingers, suction cup, and actuation unit of the gripper were printed using a low-cost and open-source fused deposition modeling 3-D printer. A single LSOVA has a blocked force of 30.35 N, a rise time of 94 ms, a bandwidth of 2.81 Hz, and a lifetime of 26 120 cycles. The blocked force and stroke of the actuators are accurately predicted using finite element and analytical models. The OPSOG can grasp at least 20 different objects. The gripper has a maximum payload-to-weight ratio of 7.06, a grip force of 31.31 N, and a tip blocked force of 3.72 N.
•A detailed summary about the state-of-the-art robotic grippers were given.•Robotic grasping processes and sensor-based control methods were summarized.•The applications of grippers in robotic ...agricultural tasks were summarized.•Challenges and future trends of grippers in agricultural robots are reported.
Grasping, carrying and placing of objects are the fundamental capabilities and common operations for robots and robotic manipulators. Grippers are the most essential components of robots and play an important role in many manipulation tasks, since they serve as the end-of-arm tools, as well as the mechanical interface between robots and environments/grasped objects. Gripper developments are motivated by the great number of different requirements, diverse workpieces and the desire for well adapted and reliable systems. Grippers provide temporary contact with the grasped objects in manipulations. Secure grasping not only requires contacting the objects, but also avoiding the risk of potential slip and damage while the objects are picked and placed. To offer secure grasping for objects with a wide variety of shapes, sizes and materials, various sensors and control strategies are also needed. With the developments of technologies, labor shortage caused by the population aging, as well as the requirements of high automation degree, agricultural robots will find their increasing applications in agricultural and food industries. As the end-of-arm tools for the robots, grippers can be seen as the hands of robots, almost all automatic manipulations are conducted directly by robotic grippers. This paper gives a detailed summary about the state-of-the-art robotic grippers, grasping and sensor-based control methods, as well as their applications in robotic agricultural tasks and food industries. Different from workpiece in industrial environment, agricultural products are fragile and damageable. The requirement for grasping agricultural products is higher than that of grasping of industrial workpieces, various sensors are needed to be installed to the grippers to make them less aggressive, and more flexible and controllable. Therefore, particular attention has been paid to the sensors that used in the grippers to improve their sensing and grasping capabilities. The advantages and disadvantages of the grippers are discussed and summarized. Finally, the challenges and potential future trends of grippers in agricultural robots are reported.
Compliant and soft hands have gained a lot of attention in the past decade because of their ability to adapt to the shape of the objects, increasing their effectiveness for grasping. However, when it ...comes to grasping highly flexible objects such as textiles, we face the dual problem: it is the object that will adapt to the shape of the hand or gripper. In this context, the classic grasp analysis or grasping taxonomies are not suitable for describing textile objects grasps. This article proposes a novel definition of textile object grasps that abstracts from the robotic embodiment or hand shape and recovers concepts from the early neuroscience literature on hand prehension skills. This framework enables us to identify what grasps have been used in literature until now to perform robotic cloth manipulation, and allows for a precise definition of all the tasks that have been tackled in terms of manipulation primitives based on regrasps. In addition, we also review what grippers have been used. Our analysis shows how the vast majority of cloth manipulations have relied only on one type of grasp, and at the same time we identify several tasks that need more variety of grasp types to be executed successfully. Our framework is generic, provides a classification of cloth manipulation primitives and can inspire gripper design and benchmark construction for cloth manipulation.
A highly versatile soft gripper that can handle an unprecedented range of object types is developed based on a new design of dielectric elastomer actuators employing an interdigitated electrode ...geometry, simultaneously maximizing both electroadhesion and electrostatic actuation while incorporating self‐sensing. The multifunctionality of the actuator leads to a highly integrated, lightweight, fast, soft gripper with simplified structure and control.
PDF
