Interfacial bond behavior of adhesively-bonded timber/cast in situ concrete (wet bond process) [Elektronski vir]
Giv, Ali Nemati ...
The goal of this research was to study the strength of the interfacial bond between cast-in-situ concrete and engineered timber (cross-laminated timber (CLT)). Double lap specimens were manufactured ...using fresh concrete that was cast between two CLT blocks. Polyurethane and epoxy adhesives were used to bond the wet concrete with the CLT blocks. The shear strength of wet-bond specimens was compared with the specimens prepared under dry conditions (prefabricated concrete cube glued to CLT blocks). The statistical analysis (T-test) of bond strength showed that the shear strengths of wet- and dry-bond specimens using epoxy and polyutrthane adhesives were no significantly different for the tested C25 plain concrete and the CLT. The failure mode of dry-bond specimens were concrete failure near the interface, however, debonding at interface was the dominant failure for the wet-bond specimens.
It was not necessary to add the material to the shelf.
Bibliographic material was successfully added on shelf.
Adding bibliographical material on shelf was not successful.
Material is already on the shelf.
Permalink
URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year
Impact factor
Edition
Category
Classification
JCR
SNIP
JCR
SNIP
JCR
SNIP
JCR
SNIP
Select the library membership card:
DRS,
in which the journal is indexed
Database name
Field
Year
Links to authors' personal bibliographies
Links to information on researchers in the SICRIS system
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
