-
The benefits of combining 1D and 3D nanofillers in a piezocomposite nanogenerator for biomechanical energy harvesting [Elektronski vir]Hanani, Zouhair ...Mechanical energy harvesting using piezoelectric nanogenerators (PNGs) offers an attractive solution for driving low-power portable devices and self-powered electronic systems. Here, we designed an ... eco-friendly and flexible piezocomposite nanogenerator (c-PNG) based on H2(Zr0.1Ti0.9)3O7 nanowires (HZTO-nw) and Ba0.85Ca0.15Zr0.10Ti0.90O3 multipods (BCZT-mp) as fillers and polylactic acid (PLA) as a biodegradable polymer matrix. The effects of the applied stress amplitude, frequency and pressing duration on the electric outputs in the piezocomposite nanogenerator (c-PNG) device were investigated by simultaneous recording of the mechanical input and the electrical outputs. The fabricated c-PNG shows a maximum output voltage, current and volumetric power density of 11.5 V, 0.6 μA and 9.2 mW cm−3, respectively, under cyclic finger imparting. A high-pressure sensitivity of 0.86 V kPa−1 (equivalent to 3.6 V N−1) and fast response time of 45 ms were obtained in the dynamic pressure sensing. Besides this, the c-PNG demonstrates high-stability and durability of the electrical outputs for around three months, and can drive commercial electronics (charging capacitor, glowing light-emitting diodes and powering a calculator). Multi-physics simulations indicate that the presence of BCZT-mp is crucial in enhancing the piezoelectric response of the c-PNG. Accordingly, this work reveals that combining 1D and 3D fillers in a polymer composite-based PNG could be beneficial in improving the mechanical energy harvesting performances in flexible piezoelectric nanogenerators for application in electronic skin and wearable devices.Vir: Nanoscale advances [Elektronski vir]. - ISSN 2516-0230 (Vol. 4, iss. 21, Nov. 2022, str. 4658-4668)Vrsta gradiva - e-članek ; neleposlovje za odrasleLeto - 2022Jezik - angleškiCOBISS.SI-ID - 131004163
Avtor
Hanani, Zouhair |
Izanzar, Ilyasse |
Merselmiz, Soukaina |
Amjoud, M'barek |
Mezzane, Daoud |
Ghanbaja, Jaafar |
Saadoune, Ismael |
Lahcini, Mohammed |
Spreitzer, Matjaž, 1979- |
Vengust, Damjan |
El Marssi, Mimoun |
Kutnjak, Zdravko |
Luk'yanchuk, Igor A. |
Gouné, Mohamed
Teme
piezoelectric |
nanogenerator |
nanocomposite |
piezoelektrik |
nanogenerator |
nanokompozit
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Hanani, Zouhair | 56293 |
Izanzar, Ilyasse | |
Merselmiz, Soukaina | 57193 |
Amjoud, M'barek | |
Mezzane, Daoud | |
Ghanbaja, Jaafar | |
Saadoune, Ismael | |
Lahcini, Mohammed | |
Spreitzer, Matjaž, 1979- | 24273 |
Vengust, Damjan | 25379 |
El Marssi, Mimoun | |
Kutnjak, Zdravko | 10124 |
Luk'yanchuk, Igor A. | |
Gouné, Mohamed |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.