VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Thickness of zero-strength layer in timber beam exposed to fuel-controlled parametric firesHuč, Sabina, gradbeništvo ; Hozjan, Tomaž, gradbeništvo ; Pečenko, RobertFire resistance is one of the essential requirements to be fulflled in the design of timber structures. For this purpose, a reduced cross-section method is given in the European standards, Eurocodes. ... The method is based on the assumption that an initial, rectangular timber cross-section exposed to fre conditions reduces to an efective cross-section, which has material properties as at a room temperature. The reduced part of the cross-section with no resistance is determined by a sum of two parameters, namely a charring depth and a thickness of zero-strength layer. Eurocodes give a value of the latter only for the standard fre exposure, which is only one of the fre curves proposed in the same standards. Therefore, the present paper examines the thickness of zero-strength layer in case of 46 diferent fuel-controlled parametric fre exposures applied to a timber beam from three sides. A four-phase numerical analysis is applied for this purpose that includes the use of a hygrothermal model and a mechanical model to determine temperatures of timber over the cross-section and the mechanical resistance of timber beam in fre conditions, respectively. The results show that the thickness of zero-strength layer takes the values between 7.9 and 18.4 mm for the fuel-controlled parametric fre exposures. Since it is clearly dependent on the parameters describing the parametric fre curve, fve equations are proposed that can be used for determination of the thickness of zero-strength layer in case of parametric fre exposures.Vir: Wood Science and Technology. - ISSN 0043-7719 (Vol. 57, iss. jul., 2023, str. 929-944)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2023Jezik - angleškiCOBISS.SI-ID - 160140291
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Huč, Sabina, gradbeništvo | 37293 |
Hozjan, Tomaž, gradbeništvo | 25423 |
Pečenko, Robert | 34368 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: