VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Numerical and experimental study on the correlation between wear and transmission error of carbon fiber-reinforced polymer gears cured in autoclave [Elektronski vir]Černe, Borut, 1989- ...This study presents a comprehensive investigation of the wear properties of carbon fiber reinforced polymer (CFRP) gears manufactured by an autoclave curing process. The composite gears were mated ... with a 42CrMo4 steel pinion and subjected to nominal tooth bending stresses between 60-150 MPa. Infrared cameras were used to monitor temperature in real time while wear rates were measured at regular intervals. Finite element analysis was performed to investigate the in- mesh contact and root stress behavior of the gears at various loads and running times. The results showed a significant deviation from the ideal meshing and stress conditions with increasing wear. In addition, the influence of the measured wear level on the path of contact and transmission error of the gear pair was studied in detail. Since the transmission error is a critical factor affecting the NVH performance of the gear pair, it is crucial to understand the potential influence of the deviations from the ideal gear meshing conditions caused by the gear wear on this phenomenon. The study has shown that while even small levels of wear have a significant impact on transmission error, the correlation between these two characteristics is generally not linearly proportional. Similarly, wear was found to influence the actual path of meshing contact very substantially.Vir: 2023 International Power Transmission and Gearing Conference (PTG) [Elektronski vir] : August 20-23, 2023, Boston, Massachusetts (Str. 1-12)Vrsta gradiva - prispevek na konferenci ; neleposlovje za odrasleLeto - 2023Jezik - angleškiCOBISS.SI-ID - 176530947
Povezava(-e):
https://asmedigitalcollection.asme.org/IDETC-CIE/proceedings-abstract/IDETC-CIE2023/87394/V011T11A007/1170823Dostopno z geslom
Avtor
Černe, Borut, 1989- |
Vukašinović, Nikola, strojnik |
Bergant, Zoran |
Zorko, Damijan
Teme
zobniki |
polimeri |
kompoziti |
obraba |
gears |
polymers |
composites |
wear
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Černe, Borut, 1989- | 37664 |
Vukašinović, Nikola, strojnik | 25450 |
Bergant, Zoran | 26556 |
Zorko, Damijan | 36764 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: