VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Prediction of total manufacturing costs for stamping toolFicko, Mirko ...For preparation of a proper offer in tool-making industry the most frequently the values of total cost for manufacture are needed. Because of lack of time for making a detailed analysis the total ... costs of tool manufacture are predicted by the expert on the basis of the experience gathered during several years of work in this area. In our work we conceived an intelligent system for predicting of total cost of the tool manufacture. The system is based on the concept of case-based reasoning; on the basis of target and source cases the system prepares the prediction of cost. The target case is the CAD-model in whose certain production costs we are interested, whereas the source cases are the CAD-model of products, for whichthe tools had already been made, and the relevant total costs are known. The system first abstracts from CAD-models the geometrical features, and thenit calculates the similarities between the source cases and target case. Then the most similar cases are used for preparation of prediction by geneticprogramming method. The genetic programming method provides the model connecting the individual geometrical features with total costs searched for.Vir: Proceedings of the 13th International Scientific Conference Achievements in Mechanical & Materials Engineering, AMME'2005, Gliwice-Wisla, Poland, May 16-19, 2005 (Str. 221-224)Vrsta gradiva - prispevek na konferenciLeto - 2005Jezik - angleškiCOBISS.SI-ID - 9665046
Avtor
Ficko, Mirko |
Drstvenšek, Igor |
Brezočnik, Miran |
Balič, Jože
Teme
inteligentni sistemi |
napovedovanje stroškov |
orodjarstvo |
štancanje |
CAD modeli |
stroški |
genetsko programiranje |
intelligent systems |
prediction of costs |
tool-making |
stamping |
CAD model |
costs |
genetic programming
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Ficko, Mirko | 20231 |
Drstvenšek, Igor | 11943 |
Brezočnik, Miran | 12657 |
Balič, Jože | 04011 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: