VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Investigation of laser surface remelting supported by acoustic emission analysis and machine learningRavnikar, Dunja ; Mojškerc, Bor ; Šturm, Roman, 1965-In the present work, laser surface remelting (LSR) was carried out on C45 carbon steel using an Nd:YAG pulse laser. The effect of process parameters, such as different laser pulse durations and the ... absence or presence of a graphite absorber, on the microstructure, remelting depth, and microhardness was examined. In most cases, the graphite coating enhanced the laser energy absorption into the surface, resulting in greater depths of the remelted zone (RZ). RZ depth increased ranging from 8 to 350 pct, depending on the laser pulse duration. An increase in the surface microhardness by a factor of 2.6 was achieved in comparison with the substrate material microhardness, namely 559 HV 0.05 versus 211 HV 0.05. Concurrently, the LSR treatment parameters were also investigated using the in process generated acoustic emission (AE) signals. AE characteristics, such as AE peak amplitude, signal duration, count, and energy, were evaluated. A correlation of the AE characteristics was established for the various LSR treatment parameters. The LSR treatment classification results confirm the feasibility of using AE in combination with machine learning (ML) for monitoring LSR and the resulting surface properties of the hardened material.Vir: Metallurgical and materials transactions. A, Physical metallurgy and materials science. - ISSN 1073-5623 (Vol. 53, 2022, str. 837-849)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2022Jezik - angleškiCOBISS.SI-ID - 96993283
vir: Metallurgical and materials transactions. A, Physical metallurgy and materials science. - ISSN 1073-5623 (Vol. 53, 2022, str. 837-849)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Ravnikar, Dunja | 32078 |
Mojškerc, Bor | 37988 |
Šturm, Roman, 1965- | 13026 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: