Fakulteta za gradbeništvo in geodezijo, Ljubljana (FGGLJ)
-
The impact of point cloud density on building outline extraction [Elektronski vir]Drešček, Urška ...Recently, building outline extraction from point cloud has gained momentum in particular in the context of 3D building modelling based on a data-driven approach, which has also been our motivation. ... For an accurate building outline extraction from a point cloud, various factors affecting the quality should be considered. In this research, we analysed the influence of point cloud density on the quality of the extracted building outlines. The input data was a classified photogrammetric point cloud, obtained from the dense image matching of images acquired by an optical sensor mounted on the unmanned aerial vehicle (UAV). For outline extraction, we selected two procedures, namely the direct approach and the raster approach. In the direct approach, building outlines are extracted directly from the points that have been classified as buildings. First, a convex hull with the alpha algorithm is estimated, which is further generalised with the Douglas-Peucker algorithm. This is followed by the shape regularisation to ensure perpendicular angles of the outline. In the raster approach, we first rasterised the building points and then extracted the building outlines using the Hough transform. In both approaches, the result is a roof outline in a 2D plane representing the maximum extent of the building above the surface. The building outlines were extracted from point clouds with five different densities. For both approaches, the quality assessment has shown that point cloud density has an impact on the building outline extraction, especially on the completeness of the outlines.Vir: XXIV ISPRS Congress, 31 Aug - 2 Sep on-line, Nice, France [Elektronski vir] : Commission II (Volume XLIII-B2-2020) (Str. 407-413)Vrsta gradiva - prispevek na konferenciLeto - 2020Jezik - angleškiCOBISS.SI-ID - 33093379
Avtor
Drešček, Urška |
Kosmatin Fras, Mojca |
Lisec, Anka |
Grigillo, Dejan
Teme
geodezija |
UAV |
oblak točk |
gostota |
prepoznavanje obrisov stavb |
analiza kakovosti |
geodesy |
UAV |
point cloud |
density |
building outline extraction |
quality analysis
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Drešček, Urška | 39205 |
Kosmatin Fras, Mojca | 06120 |
Lisec, Anka | 24340 |
Grigillo, Dejan | 17882 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: