Fakulteta za strojništvo, Ljubljana (FSLJ)
-
Improving the performance of a proportional 4/3 waterhydraulic valve by using a diamond-like-carbon coatingMajdič, Franc ; Velkavrh, Igor ; Kalin, MitjanToday, there are several waterhydraulic, power-control systems already available on the market. Their components are usually made of stainless steel, which ensures satisfactory performance under ... mild, conventional operating conditions. However, for more demanding operating conditions and long-term, low-friction and low-wear performance, they do not provide the required performance. One of the possible ways to improve the performance of stainless-steel components in waterhydraulic systems is to coat them with diamond-like carbon (DLC), since this material is well known for its excellent low-friction and low-wear characteristics and also provides very good performance under water-lubrication conditions. In this study, real-scale lifetime tests with 2.3 million cycles were performed on a hydraulic test rig with a proportional 4/3 directional control waterhydraulic valve. Two types of contacts in the valve were tested: the steel-spool/steel-sleeve and the DLC-spool/steel-sleeve. The wear behaviour of the valve was evaluated with a scanning electron microscope (SEM) and internal leakage measurements. In the real-scale lifetime tests the wear and the damage on the DLC-coated spool were significantly lower than on the steel spool. Furthermore, in agreement with this, the internal leakage in the DLC-spool/steel-sleeve valve was almost constant throughout the tests, while in the steel-spool/steel-sleeve valve the leakage slowly, but steadily, increased. The steel/steel and DLC/steel contacts were also separately evaluated in pin-on-disc model tribological tests under water-lubricated conditions for a comparison and for a better understanding of the tribological mechanisms. In agreement with the real-scale tests, the DLC/steel contact showed improved friction and wear performance in comparison with the steel/steel contact.Vir: Wear. - ISSN 0043-1648 (Vol. 297, iss. 1/2, Jan. 2013, str. 1016-1024)Vrsta gradiva - članek, sestavni delLeto - 2013Jezik - angleškiCOBISS.SI-ID - 12595995
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Majdič, Franc | 24749 |
Velkavrh, Igor | 28613 |
Kalin, Mitjan | 14556 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: