Fakulteta za strojništvo, Ljubljana (FSLJ)
-
The wetting of steel, DLC coatings, ceramics and polymers with oilsand water : the importance and correlations of surface energy, surfacetension, contact angle and spreadingKalin, Mitjan ; Polajnar, MarkoThe importance of wetting is becoming increasingly obvious and its control is inevitable in many engi-neering applications, including tribology and interface nanotechnology. However, the relations ... between the key parameters affecting surface liquid wetting behaviour under realistic conditions are not very well understood, especially for typical engineering materials and lubricants (oils), often leading to exceptions and contradictions, which impede their use in engineering models and theories, and so the possible opti-misation of the interfaces of engineering systems. In this paper we present the correlations between the contact angle, the spreading, the surface tension and the surface energy of fourteen frequently used engineering materials belonging to four different classes of materials (steel, DLC coatings, ceramics, andpolymers) wetted with four different liquids: three oils (a non-polar synthetic oil of two different vis-cosities and a polar natural-based oil) and water. The results represent systematically and consistentlyobtained data about the wetting-relevant parameters of the selected materials and lubricants and numer-ous correlations between them. However, the most striking result suggests that the spreading parametercorrelates very linearly with the surface energy for all the materials and liquids studied, in both theadhesion-wetting and spreading-wetting regimes. The experimentally determined spreading vs. surfaceenergy correlation functions that appear generally valid for a broad range of properties of the materials and oils can thus be applied as an engineering tool to tailor and design the required/desired wetting performance and nature of the solid liquid interfaces. The spreading parameter SP in contrast to the contact angle was found to be a reliable and relevant parameter for describing the wetting of oils with selected engineering materials.Vir: Applied Surface Science. - ISSN 0169-4332 (Vol. 293, Feb. 2014, str. 97-108)Vrsta gradiva - članek, sestavni delLeto - 2014Jezik - angleškiCOBISS.SI-ID - 13355803
Avtor
Kalin, Mitjan |
Polajnar, Marko
Teme
wetting |
surface energy |
surface tension |
contact angle |
spreading |
omočljivost |
površinska energija |
površinska napetost |
kot omočljivosti |
razširjanje
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Kalin, Mitjan | 14556 |
Polajnar, Marko | 33657 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: