Fakulteta za strojništvo, Ljubljana (FSLJ)
-
The effect of sliding distance and temperature on the initiation and formation of the aluminium alloy transfer to the uncoated and coated tool steel [Elektronski vir]Jerina, Jure ; Kalin, MitjanIn processes of forming aluminium alloys, there are several difficulties in controlling process parameters and product quality due to the unfavourable contact conditions and tribological properties ... of the contact surfaces. Because of the lower required forming forces and higher material formability, most of the aluminium bulkmetal forming (i.e. forging, extrusion) is performed at elevated temperatures, which causes substantial thermal and mechanical stresses and die surface wear due to the abrasion and adhesion. Adhesion and in particular formation of the aluminium alloys transfer on the surface of die bearing surface is one of the predominant reasons for tool failure and inadequate surface quality of products. The present work was focused on the aluminium alloy (EN AW6060) transfer initiation and evolution onto the coated (CrN) and uncoated nitrided hot work tool steel (AISI H13) in a temperature range from 20 °C to 500 °C. All tests were performed on the new Load scanner tribo test rig in a dry sliding contact conditions. The contact has been investigated in terms of the surface area and volume of the transferred aluminium alloy to the uncoated and coated tool steel surface, the topography of the wear trace and corresponding change in the coefficient of friction.Vir: Nordtrib 2014 [Elektronski vir] (Datoteka Nordtrib2014_FinalPaper_25 (6 f.))Vrsta gradiva - prispevek na konferenciLeto - 2014Jezik - angleškiCOBISS.SI-ID - 13532443
Avtor
Jerina, Jure |
Kalin, Mitjan
Teme
prevleke |
aluminijeve zlitine |
trenje |
elevated temperatures |
friction |
galling |
aluminium alloys |
coatings
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Jerina, Jure | 33243 |
Kalin, Mitjan | 14556 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: