-
Influence of anode immersion speed on current and power in plasma electrolytic polishing [Elektronski vir]Valentinčič, Joško ...Plasma electrolytic polishing (PeP) is mainly used to improve the surface quality and thus the performance of electrically conductive parts. It is usually used as an anodic process, i.e., the ... workpiece is positively charged. However, the process is susceptible to high current peaks during the formation of the vapour–gaseous envelope, especially when polishing workpieces with a large surface area. In this study, the influence of the anode immersion speed on the current peaks and the average power during the initialisation of the PeP process is investigated for an anode the size of a microreactor mould insert. Through systematic experimentation and analysis, this work provides insights into the control of the initialisation process by modulating the anode immersion speed. The results clarify the relationship between immersion speed, peak current, and average power and provide a novel approach to improve process efficiency in PeP. The highest peak current and average power occur when the electrolyte splashes over the top of the anode and not, as expected, when the anode touches the electrolyte. By immersion of the anode while the voltage is applied to the anode and counterelectrode, the reduction of both parameters is over 80%.Vir: Micromachines [Elektronski vir]. - ISSN 2072-666X (Vol. 15, iss. 6, [article no.] 783, 2024, str. 1-13)Vrsta gradiva - e-članek ; neleposlovje za odrasleLeto - 2024Jezik - angleškiCOBISS.SI-ID - 199241731
Avtor
Valentinčič, Joško |
Zeidler, Henning, strojnik |
Böttger, Toni |
Jerman, Marko, strojnik
Teme
plazemsko elektrolitsko poliranje |
parno-plinska ovojnica |
hitrost potapljanja |
vršni tok |
povprečni tok |
inicializacija procesa |
plasma electrolytic polishing |
vapour–gaseous envelope |
immersion speed |
peak current |
average power |
process initialisation
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Valentinčič, Joško | 18553 |
Zeidler, Henning, strojnik | |
Böttger, Toni | |
Jerman, Marko, strojnik | 33239 |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.