Narodna in univerzitetna knjižnica, Ljubljana (NUK)
-
Evaluation of shape complexity based on STL dataValentan, Bogdan ...The objective of this paper is to present the complexity of a part, based on basic information of the STL data. A few methods for the evaluation of shape complexity are presented. Methods vary from ... very simple ones based on the number of triangles in the STL file and the parts volume to more complex mathematical determination based on the relations of the basic STL data. We discovered that the evaluation of shape complexity based only on basic STL data gives us some basic view on part complexity. For parts with large block volume/part volume ratio and thinner parts with free form surfaces only the first method is suitable and gives us suitable results. The complexity of the shape of a part is an important factor for all manufacturing procedures. When using conventional machining, the parts complexity presents the key factor in determining the optimal way of manufacturing. Also, when using rapis tooling, the complexity of the part determines the parting plane laypout and eventual tool construction. Even when using certain rapid prototyping procedures, the support material consumption depends highly on the complexity of the part and together with the problem of optimal orientation and position of the part, significantly influences the manufacturing costs. A few test methods that try to determine the complexity with respect to the manufacturing procedure used for the part are presented. Choosing the maximum efficient manufacturing process on the basis of part complexity is a new perspective in manufacturing, which may cause a revolution in manufacturing optimization, especially in hybrid manufacturing processes.Vir: Journal of achievements in materials and manufacturing engineering : JAMME. - ISSN 1734-8412 (Vol. 17, iss. 1/2, Jul.-Aug. 2006, str. 293-296)Vrsta gradiva - članek, sestavni delLeto - 2006Jezik - angleškiCOBISS.SI-ID - 10528534
Avtor
Valentan, Bogdan |
Brajlih, Tomaž |
Drstvenšek, Igor |
Balič, Jože
Teme
proizvodni sistemi |
obdelovalni procesi |
optimiranje |
načrtovanje |
STL datoteke
vir: Journal of achievements in materials and manufacturing engineering : JAMME. - ISSN 1734-8412 (Vol. 17, iss. 1/2, Jul.-Aug. 2006, str. 293-296)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Valentan, Bogdan | 27555 |
Brajlih, Tomaž | 26248 |
Drstvenšek, Igor | 11943 |
Balič, Jože | 04011 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema:
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi