-
Characterization of Cu-Al-Ni melt-spun ribbons using a focussed ion beam (FIB) = Karakterizacija hitrostrjenih trakov zlitine Cu-Al-Ni z uporabo fokusiranega ionskega curkaZupanič, Franc ...This work investigates the possibilities for applying a focussed ion beam (FIB) for the metallographic preparation and characterization of Cu-Al-Ni melt-spun ribbons. Two alloys were selected for ... this reason: CuAl13Ni4 and CuAl15Ni4. The microstructure of the first alloy was fully martensitic and the microstructure of the second consisted of two phases: martensite and ▫$\gamma_2$▫. It was discovered that with FIB-etching the microstructures of both alloys can be clearly revealed on polished cross-sections of the melt-spun ribbons, as well as on their wheel-side and air-side surfaces. However, better results were obtained when the etched surface was smoother, and finer details were visible when using smaller ion currents. In addition, a study was made into the influence of platinum deposition on the quality of 3D-cross sections. It was found that Pt-deposition is necessary when the edge of the trench should be straight and sharp, and the surface of the 3D cross-section smooth. However, in this case, the microstructure of the ribbons free surface cannot be seen.Vir: RMZ - Materials and geoenvironment : periodical for mining, metallurgy and geology = RMZ - Materiali in geookolje : revija za rudarstvo, metalurgijo in geologijo. - ISSN 1408-7073 (Letn. 54, št. 3, dec. 2007, str. 319-329)Vrsta gradiva - članek, sestavni delLeto - 2007Jezik - angleškiCOBISS.SI-ID - 12060182
Avtor
Zupanič, Franc |
Unterweger, Elfride |
Kneissl, Albert C. |
Anžel, Ivan, inženir metalurgije in materialov |
Lojen, Gorazd
Teme
zlitine |
baker |
aluminij |
nikelj |
trakovi |
metalografija |
mikrostruktura |
ionski curek |
litje
vir: RMZ - Materials and geoenvironment : periodical for mining, metallurgy and geology = RMZ - Materiali in geookolje : revija za rudarstvo, metalurgijo in geologijo. - ISSN 1408-7073 (Letn. 54, št. 3, dec. 2007, str. 319-329)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Zupanič, Franc | 12295 |
Unterweger, Elfride | |
Kneissl, Albert C. | |
Anžel, Ivan, inženir metalurgije in materialov | 10369 |
Lojen, Gorazd | 11951 |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi