UP - logo
Narodna in univerzitetna knjižnica, Ljubljana (NUK)
Naročanje gradiva za izposojo na dom
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi
PDF
  • Injection-moulding compounding of PP polymer nanocomposites
    Battisti, Markus Gottfried ; Friesenbichler, Walter
    The objective of this study is the comparison of different compounding techniques and their influence on the Youngs modulus. Both, conventional processing of polymer nanocomposites and processing in ... the worldwide unique Injection Molding Compounder (PNC-IMC) were evaluated. Additionally the effects of nanofillers on the thermal conductivity of polymer nanocomposites were investigated at various pressures.In comparison to the conventional compounding process, where the compound has to be pelletized and fed into the injection molding machine for the second plasticizing process, the injection molding compounding combines these two processing steps. The material compounding and the subsequent injection molding are done directly by only one plasticizing process by the use of a heated melt line and a melt accumulator. In this study, both of these techniques were used for the production of polymer nanocomposites. This paper shows the different effects of processing techniques, screw speed, counter-pressure and different extruder length on the Youngs modulus and demonstrates that for the improvements a compromise between shear energy input and residence time is essential. The increase of thermal conductivity by using nanofillers compared to the virgin polypropylene is shown. The investigated increase in thermal conductivity should be very interesting for the industry in terms of cycle time reduction in the injection molding process. These very first results give a good overview on both the possibilities and the limitations of the innovative concept of the PNC-IMC. Further studies on the detailed understanding concerning exfoliation and intercalation of layered silicates in polymer melt will be done.
    Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 59, no. 11, Nov. 2013, str. 662-668, SI 135)
    Vrsta gradiva - članek, sestavni del
    Leto - 2013
    Jezik - angleški
    COBISS.SI-ID - 13219355

    Povezava(-e):

    Digitalna knjižnica Slovenije - dLib.si
    DOI

vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 59, no. 11, Nov. 2013, str. 662-668, SI 135)

loading ...
loading ...
loading ...

Vnos na polico