Magnesium-doped zinc oxide "ZnO:Mg" nanocrystals (NCs) were fabricated using a sol gel method. The Mg concentration impact on the structural, morphological, electrical, and dielectric characteristics ...of ZnO:Mg NCs were inspected. X-ray diffraction (XRD) patterns display the hexagonal wurtzite structure without any additional phase. TEM images revealed the nanometric size of the particles with a spherical-like shape. The electrical conductivity of the ZnO NCs, thermally activated, was found to be dependent on the Mg content. The impedance spectra were represented via a corresponding circuit formed by a resistor and constant phase element (CPE). A non-Debye type relaxation was located through the analyses of the complex impedance. The conductivity diminished with the incorporation of the Mg element. The AC conductivity is reduced by raising the temperature. Its plot obeys the Arrhenius law demonstrating a single activation energy during the conduction process. The complex impedance highlighted the existence of a Debye-type dielectric dispersion. The various ZnO:Mg samples demonstrate high values of dielectric constant with small dielectric losses for both medium and high-frequency regions. Interestingly, the Mg doping with 3% content exhibits colossal dielectric constant (more than 2 × 10
) over wide temperature and frequency ranges, with Debye-like relaxation. The study of the electrical modulus versus the frequency and at different temperatures confirms the non-Debye relaxation. The obtained results reveal the importance of the ZnO:Mg NCs for device applications. This encourages their application in energy storage.
Graphitic carbon nitride (G-C3N4) and NiS-NiO/G-C3N4 nanocomposite have been synthesized via combustion and hydrothermal techniques, respectively. The chemical and morphological properties of these ...materials were confirmed using different analytical methods. SEM confirms the formation of G-C3N4 sheets containing additional petal-like shapes of NiS-NiO nanoparticles. The electrochemical testing of NiS-NiO/G-C3N4 symmetric supercapacitors is carried out from 0.6 M HCl electrolyte. Such testing includes charge/discharge, cyclic voltammetry, impedance, and supercapacitor stability. The charge/discharge time reaches 790 s at 0.3 A/g, while the cyclic voltammetry curve forms under a high surface area. The produced specific capacitance (C
) and energy density values are 766 F/g and 23.55 W.h.kg
, correspondingly.
In this research, we studied the performance analysis of inductively coupled radiofrequency plasma “RF-ICP” torch used in multi-material processing. A 2D numerical model built with COMSOL ...Multiphysics was used to study the discharge behavior and evaluate the overall efficiency transmitted into the plasma system. The temperature and velocity flow of the plasma were investigated. The numerical results are consistent with previous experimental studies. The temperature and velocity profiles are represented under a wide range of RF power and for different sheath gas flow rates. With increasing power, the radial peak temperature typically shifts towards the wall. The resistance of the torch rises whereas the inductance diminishes with increasing RF power. The overall dependency of the coupling efficiency to the RF power is also estimated. The stabilization of the plasma flow dependency to the sheath swirl flow was investigated. The incorporation of Helium (0.02%) into an Argon gas was established to minimize the energy lost in the sidewall. The number and spacing of induction coil numbers affects the temperature and flow field distribution. A valuable approach to designing and optimizing the induction plasma system is presented in the proposed study. The obtained results are fundamental to specify ICP torch design criteria needed for multi-material processing.
Chromium (Cr)-doped zinc oxide (ZnO) nanorods with wurtzite hexagonal structure were prepared through a thermal decomposition technique. The concentration effect of the Cr doping on the structural, ...morphological, and optical properties of the ZnO nanorods was established by correlating various measurements: transmission electron microscopy (TEM), photoluminescence (PL), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and several UV-visible studies. The obtained nanorods were investigated as photocatalysts for the photodegradation process of methyl orange (MO), under UV-vis light illumination. Different weights and time intervals were studied. A 99.8% photodegradation of MO was obtained after 100 min in the presence of 1 wt.% Cr III acetate hydroxide and zinc acetate dehydrate “ZnO-Cr1”. The kinetic rate constant of the reaction was found to be equal to 4.451 × 10−2 min−1 via a pseudo-first order rate model. Scavenger radicals demonstrated the domination of OH• radicals by those of O2•− superoxide species during the photodegradation. The interstitial oxygen site Oi is proposed to play a key role in the generation of holes in the valence band under visible irradiation. The ZnO-Cr1 photocatalyst displayed good cycling stability and reusability.
Graphitic carbon nitride (G-C3N4) was synthesized through the direct combustion of urea in the air. The CoS-Co2O3/G-C3N4 composite was synthesized via the hydrothermal method of G-C3N4 using cobalt ...salts. The morphological and chemical structures were determined through XRD, XPS, SEM, and TEM. XRD and XPS analyses confirmed the chemical structure, function groups, and elements percentage of the prepared nanocomposite. SEM measurements illustrated the formation of G-C3N4 sheets, as well as the flower shape of the CoS-Co2O3/G-C3N4 composite, evidenced through the formation of nano appendages over G-C3N4 sheets. TEM confirmed the 2D nanosheets of G-C3N4 with an average width and length of 80 nm and 170 nm, respectively. Two symmetric electrodes for the supercapacitor from the CoS-Co2O3/G-C3N4 composite. Electrochemical measurements were carried out to determine the charge/discharge, cyclic voltammetry, stability, and impedance of the prepared supercapacitor. The measurements were carried out under acid (0.5 M HCL) and basic (6.0 M NaOH) mediums. The charge and discharge lifetime values in the acid and base medium were 85 and 456 s, respectively. The cyclic voltammetry behavior was rectangular in a base medium for the pseudocapacitance feature. The supercapacitor had 100% stability retention up to 600 cycles; then, the stability decreased to 98.5% after 1000 cycles. The supercapacitor displayed a specific capacitance (CS) of 361 and 92 F/g, and an energy density equal to 28.7 and 30.2 W h kg−1 in the basic and acidic mediums, respectively. Our findings demonstrate the capabilities of supercapacitors to become an alternative solution to batteries, owing to their easy and low-cost manufacturing technique.
The melt-quenching technique was used to synthesize tellurite glasses of the chemical composition 80TeO2-(20-x) ZnO-xV2O5. X-ray diffraction (XRD) patterns indicate the amorphous nature of the ...prepared glasses. Raman and FTIR measurements demonstrate a progressive substitution of the Te-O-Te linkages by the Te-O-V bridges and the formation of VO4 and VO5 units by a change of the vanadium coordination due to the higher number of oxygens incorporated by further addition of V2O5. The AC conductivity was investigated in the frequency range of 40 Hz to 107 Hz between 473 K to 573 K. A good coherence of the AC conductivity was found using a model correlating the barrier hopping (CPH) and the dominant conduction process changes from ionic to polaronic with the addition of V2O5. The dielectric constant exhibits high values in the range of lower and medium frequencies. Both variations of the electric modulus and the dielectric loss parameters with frequency and temperature showed a relaxation character mainly assigned to the vanadate phases. The electric modulus displays a non-Debye dielectric dispersion and a relaxation process. The present results open the door to future zinc-tellurite glasses-doped vanadium exploitation as a potential electrolyte-based material for solid-state batteries.
A quantum dot (QD) thin film of arsenic (III) oxide-hydroxide/polypyrrole (As2S3-As2O3/Ppy) with a supernova-like shape has been developed for optoelectronic applications across a wide optical range, ...spanning from ultraviolet (UV) to infrared (IR). The fabrication process involves the polymerization of pyrrole to form Ppy in the presence of NaAsO2 and K2S2O8. The resulting QD exhibits a remarkable morphology characterized by a supernova-like structure and a porous nature with a particle size of 4 nm. The unique morphology of the QD contributes to its optical properties. The material demonstrates a maximum optical absorbance that extends up to 600 nm. The chemical structure of the composite has been proved using various characterization techniques. The As2S3-As2O3/Ppy QD thin film holds significant potential for optoelectronic applications, particularly in light detection across multiple optical regions. Its sensitivity has been evaluated through the measurement of photoresponsivity (R), yielding a high value of 0.31 mA/W. This indicates a substantial current density (Jph) of 0.031 mA/cm2 at a wavelength of 340 nm. Additionally, the detectivity (D) of the photodetector has been calculated based on these values, resulting in a detection capability of 6.9 × 107 Jones. This indicates the ability to detect low levels of photons using this photodetector. The highly reproducible nature of this photodetector enables its application in various optoelectronic systems. The As2S3-As2O3/Ppy QD thin film offers great promise as a versatile optoelectronic application with its wide optical range, excellent sensitivity, and detectivity.
In this work, we report the results of the compositional analysis of an aluminum gallium arsenide (AlGaAs) sample using the calibration-free laser-induced breakdown spectroscopy (CF-LIBS) technique. ...The AlGaAs sample was doped with three various concentrations of gallium (Ga), arsenic (As), and aluminum (Al), as reported by the manufacturer, and the CF-LIBS technique was employed to identify the doping concentration. A pulsed Q-switched Nd: YAG laser capable of delivering 200 and 400 mJ energy at 532 and 1064 nm, respectively, was focused on the target sample for ablation, and the resulting emission spectra were captured using a LIBS 2000+ spectrometer covering the spectral range from 200 to 720 nm. The emission spectra of the AlGaAs sample yielded spectral lines of Ga, As, and Al. These lines were further used to calculate the plasma parameters, including electron temperature and electron number density. The Boltzmann plot method was used to calculate the electron temperature, and the average electron temperature was found to be 5744 ± 500 K. Furthermore, the electron number density was calculated from the Stark-broadened line profile method, and the average number density was calculated to be 6.5 × 1017 cm−3. It is further observed that the plasma parameters including electron temperature and electron number density have an increasing trend with laser irradiance and a decreasing trend along the plume length up to 2 mm. Finally, the elemental concentrations in terms of weight percentage using the CF-LIBS method were calculated to be Ga: 94%, Al: 4.77% and As: 1.23% for sample-1; Ga: 95.63%, Al: 1.15% and As: 3.22% for sample-2; and Ga: 97.32%, Al: 0.69% and As: 1.99% for sample-3. The certified concentrations were Ga: 95%, Al: 3% and As: 2% for sample-1; Ga: 96.05%, Al: 1% and As: 2.95% for sample-2; and Ga: 97.32%, Al: 0.69% and As: 1.99% for sample-3. The concentrations measured by CF-LIBS showed good agreement with the certified values reported by the manufacturer. These findings suggest that the CF-LIBS technique opens up an avenue for the industrial application of LIBS, where quantitative/qualitative analysis of the material is highly desirable.
A novel, highly efficient Mo(VI) oxide-iodide/polypyrrole (MoO
2
I
3
−
/Ppy) cup coral-like structure has been developed. This composite is synthesized using an economical oxidative polymerization ...method. The significant enhancement observed in the material’s morphology of the prepared nanocomposite preserves its optical properties, presenting a promising bandgap of 2.8 eV. This flexible MoO
2
I
3
−
/Ppy composite demonstrates exceptional optical properties under various conditions, including exposure to light, monochromatic wavelengths, and darkness. The measured current density (Jph) values indicate the device’s potential, which reflects its sensitivity. Specifically, the recorded
J
ph
values are 0.6 mA/cm
2
under general illumination, 0.46 mA/cm
2
at a 340 nm monochromatic wavelength, and 0.3 mA/cm
2
in dark conditions. The efficiency and detectivity of the flexible MoO
2
I
3
−
/Ppy photodetector have been meticulously assessed. The photoresponsivity (R), measured at 2.34 mA/W, highlights its high capability to convert incident light into discernible electrical signals. The detectivity (D) value of 5.22 × 10
8
Jones demonstrates the photodetector’s ability to detect weak light signals with remarkable precision. Its high performance, flexibility, and cost-effective production methods make the prepared photodetector an asset in optoelectronics, particularly to sectors seeking reliable and efficient solutions for light detection.