In this paper, a dual half-bridge LLC resonant converter with magnetic control is proposed for the battery charger application. The primary switches are shared by two LLC resonant networks, and their ...outputs are connected in series. One of the LLC resonant converters is designed to operate at the series resonant frequency, which is also the highest efficiency operating point, and the constant output voltage characteristic is achieved at this operating point. The second LLC resonant converter adopts magnetic control to regulate the total output current and voltage during both constant current charge mode and constant voltage charge mode. Meanwhile, the function decoupling idea is adopted to further improve the system efficiency. The significant amount of the power is handled by the LLC resonant converter operating at the series resonant frequency, whereas the second LLC resonant converter fulfills the responsibility to achieve closed-loop control. By carefully designing the resonant networks, the zero-voltage switching for primary switches and zero-current switching for secondary diodes can be achieved for whole operation range. A 320-W experimental prototype is built to verify the theoretical analysis, and the maximum efficiency is measured about 95.5%.
The treatment gap between the number of people with mental disorders and the number treated represents a major public health challenge. We examine this gap by socio-economic status (SES; indicated by ...family income and respondent education) and service sector in a cross-national analysis of community epidemiological survey data.
Data come from 16 753 respondents with 12-month DSM-IV disorders from community surveys in 25 countries in the WHO World Mental Health Survey Initiative. DSM-IV anxiety, mood, or substance disorders and treatment of these disorders were assessed with the WHO Composite International Diagnostic Interview (CIDI).
Only 13.7% of 12-month DSM-IV/CIDI cases in lower-middle-income countries, 22.0% in upper-middle-income countries, and 36.8% in high-income countries received treatment. Highest-SES respondents were somewhat more likely to receive treatment, but this was true mostly for specialty mental health treatment, where the association was positive with education (highest treatment among respondents with the highest education and a weak association of education with treatment among other respondents) but non-monotonic with income (somewhat lower treatment rates among middle-income respondents and equivalent among those with high and low incomes).
The modest, but nonetheless stronger, an association of education than income with treatment raises questions about a financial barriers interpretation of the inverse association of SES with treatment, although future within-country analyses that consider contextual factors might document other important specifications. While beyond the scope of this report, such an expanded analysis could have important implications for designing interventions aimed at increasing mental disorder treatment among socio-economically disadvantaged people.
To examine barriers to initiation and continuation of mental health treatment among individuals with common mental disorders.
Data were from the World Health Organization (WHO) World Mental Health ...(WMH) surveys. Representative household samples were interviewed face to face in 24 countries. Reasons to initiate and continue treatment were examined in a subsample (n = 63,678) and analyzed at different levels of clinical severity.
Among those with a DSM-IV disorder in the past 12 months, low perceived need was the most common reason for not initiating treatment and more common among moderate and mild than severe cases. Women and younger people with disorders were more likely to recognize a need for treatment. A desire to handle the problem on one's own was the most common barrier among respondents with a disorder who perceived a need for treatment (63.8%). Attitudinal barriers were much more important than structural barriers to both initiating and continuing treatment. However, attitudinal barriers dominated for mild-moderate cases and structural barriers for severe cases. Perceived ineffectiveness of treatment was the most commonly reported reason for treatment drop-out (39.3%), followed by negative experiences with treatment providers (26.9% of respondents with severe disorders).
Low perceived need and attitudinal barriers are the major barriers to seeking and staying in treatment among individuals with common mental disorders worldwide. Apart from targeting structural barriers, mainly in countries with poor resources, increasing population mental health literacy is an important endeavor worldwide.
Highlights • Diffraction and cryo-EM provide a detailed picture of TMV in various states, even during assembly. • TMV is surprisingly resilient against many polar organic solvents, and against ...protonation. • A large range of macro- and nanoscale spectroscopic methods can be used to discover more physical properties. • Technological uses are mainly based on inorganic material on TMV, hence on inorganic tubes of >20 nm diameter.
We present an expedient and economical route to a new spiroketal-based C
-symmetric chiral scaffold, termed SPIROL. Based on this spirocyclic scaffold, several chiral ligands were generated. These ...ligands were successfully employed in an array of stereoselective transformations, including in iridium-catalyzed hydroarylations (up to 95 % ee), palladium-catalyzed allylic alkylations (up to 97 % ee), intermolecular palladium-catalyzed Heck couplings (up to 94 % ee), and rhodium-catalyzed dehydroalanine hydrogenation (up to 93 % ee).
An equation has been derived to predict unit cell volume of high entropy alloys, HEA's, by two different methods. In the first method, a HEA is considered as a mixture of solid solutions. Based on an ...equation previously reported to calculate unit cell volume of intermetallic compounds, an expression to calculate unit cell volume of HEA's was obtained. In the second method, a HEA is modeled as a mixture of solute element atoms surrounded by different environments. Using the effective volume of solute atoms in these environments, the unit cell volume of a HEA was derived. Both treatments led to the same equation. For cubic HEA's lattice parameters were calculated. The predicted lattice parameters were compared with those reported for 79 HEA's. Lattice parameters were also calculated using the equivalent of Vegard's law for these alloys. Average errors were 0.64%, and 0.53% when Vegard's law, and the equation derived in this work were used, respectively. Although these average errors seem acceptable, they were as high as 4.27%, and 4.70% when Vegard's law, and the equation proposed are applied, respectively. The roles on error, of method to determine chemical composition, method to measure lattice parameter, and type of elements present on the alloy were examined.
•An equation to predict unit cell volume of HEA's (as a mixture of solid solutions).•An equation to predict unit cell volume of HEA's (solute different environments).•Both treatments led to the same equation.•Lattice parameter of cubic HEA's can be predicted.
Scores on an outcome measurement instrument depend on the type and settings of the instrument used, how instructions are given to patients, how professionals administer and score the instrument, etc. ...The impact of all these sources of variation on scores can be assessed in studies on reliability and measurement error, if properly designed and analyzed. The aim of this study was to develop standards to assess the quality of studies on reliability and measurement error of clinician-reported outcome measurement instruments, performance-based outcome measurement instrument, and laboratory values.
We conducted a 3-round Delphi study involving 52 panelists.
Consensus was reached on how a comprehensive research question can be deduced from the design of a reliability study to determine how the results of a study inform us about the quality of the outcome measurement instrument at issue. Consensus was reached on components of outcome measurement instruments, i.e. the potential sources of variation. Next, we reached consensus on standards on design requirements (n = 5), standards on preferred statistical methods for reliability (n = 3) and measurement error (n = 2), and their ratings on a four-point scale. There was one term for a component and one rating of one standard on which no consensus was reached, and therefore required a decision by the steering committee.
We developed a tool that enables researchers with and without thorough knowledge on measurement properties to assess the quality of a study on reliability and measurement error of outcome measurement instruments.
Fluorescence excitation emission matrix (FEEM) spectroscopy was used to evaluate its applicability as a tool to track dissolved organic matter (DOM) in a drinking water treatment plant (DWTP) that ...incorporates a conventional line (consisting in ozonation and GAC filtration) and a membrane-based line (consisting in ultrafiltration, reverse osmosis and mineralization) working in parallel. Seven sampling points within the different process stages were characterized monthly during 2014. A global Parallel Factor Analysis (PARAFAC) was used to pull out underlying organic fractions from the fluorescence spectra. Accordingly a five components model was selected to describe the system and the pros and cons of the model were discussed by analysis of the residuals. Among the five fluorescent components, those associated to humic-like matter (C1, C3 and C4) showed a similar season variability in the river water feeding the DWTP (which resembled that of UV254 and TOC), whereas the two components associated to protein-like matter (C2 and C5) exhibited a different behavior. The maximum fluorescence intensity values (Fmax) were used to quantify DOM removals across the plant. Compared to the conventional line, water from the UF/RO membrane-based line showed between 6 and 14 times lower fluorescence intensity signal for the humic-like components and between 1 and 3 for the protein-like components as compared to the conventional line. The differences in DOM composition due to seasonal variations and along the treatment trains point out the suitability of using fluorescence measurements over other parameters such as UV254 as a monitoring tool to help optimize operation conditions of each treatment stage and improve produced water quality in a DWTP.
Display omitted
•Water quality from a Drinking Water Treatment Plant was characterized using FEEM-PARAFAC.•The time-lapse measurements identified two different trends in organic intake.•The position-lapse measurements showed selectivity in removing the organic fractions.•The performance of a full-scale membrane-line and a conventional-line were compared.
PDF
