The Compact Muon Solenoid (CMS) is a general purpose detector designed to run at the highest luminosity at the CERN Large Hadron Collider (LHC). Its distinctive features include a 4-T superconducting ...solenoid with 6-m-diameter by a 12.5-m-length free bore, enclosed inside a 10,000-ton return yoke made of construction steel. The return yoke consists of five dodecagonal three-layered barrel wheels and four end-cap disks at each end comprised of steel blocks up to 620 mm thick, which serve as the absorber plates of the muon detection system. To measure the field in and around the steel, a system of 22 flux loops and 82 3-D Hall sensors is installed on the return yoke blocks. A 3-D model of the CMS magnet is developed to describe the magnetic field everywhere outside the tracking volume measured with the field-mapping machine. The first attempt is made to measure the magnetic flux density in the steel blocks of the CMS magnet yoke using the standard magnet discharge with the current ramp down speed of 1.5 A/s.
Characterisation of scCVD diamond detectors with γ sources Caiffi, B.; Amapane, N.; Argirò, S. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
08/2014, Letnik:
754
Journal Article
Recenzirano
Odprti dostop
A single-crystal CVD (Chemical Vapor Deposition) diamond detector was used to measure γ rays in order to assess its performance in terms of energy resolution and linearity. For this purpose, 57Co, ...133Ba, 22Na, 207Bi and 137Cs γ sources were used. Electrons scattered by the backward Compton process were detected in the diamond, in coincidence with (backscattered) γs measured in a NaI detector, placed at 180° from the CVD diamond detector with respect to the source. The resulting calibration shows a linear dependence of the charge deposited in the diamond and a resolution of about 24keV FWHM for the energy of the incident γs between 40keV (57Co) and 477keV (137Cs), comparable with the resolution of our electronic chain.
Combined measurements of the production and decay rates of the Higgs boson, as well as its couplings to vector bosons and fermions, are presented. The analysis uses the LHC proton–proton collision ...data set recorded with the CMS detector in 2016 at
s
=
13
Te
, corresponding to an integrated luminosity of 35.9
fb
-
1
. The combination is based on analyses targeting the five main Higgs boson production mechanisms (gluon fusion, vector boson fusion, and associated production with a
W
or
Z
boson, or a top quark-antiquark pair) and the following decay modes:
H
→
γ
γ
,
Z
Z
,
W
W
,
τ
τ
,
b
b
, and
μ
μ
. Searches for invisible Higgs boson decays are also considered. The best-fit ratio of the signal yield to the standard model expectation is measured to be
μ
=
1.17
±
0.10
, assuming a Higgs boson mass of
125.09
Ge
. Additional results are given for various assumptions on the scaling behavior of the production and decay modes, including generic parametrizations based on ratios of cross sections and branching fractions or couplings. The results are compatible with the standard model predictions in all parametrizations considered. In addition, constraints are placed on various two Higgs doublet models.
A search for invisible decays of a Higgs boson is performed using proton-proton collision data collected with the CMS detector at the LHC in 2016 at a center-of-mass energy s=13TeV, corresponding to ...an integrated luminosity of 35.9fb−1. The search targets the production of a Higgs boson via vector boson fusion. The data are found to be in agreement with the background contributions from standard model processes. An observed (expected) upper limit of 0.33(0.25), at 95% confidence level, is placed on the branching fraction of the Higgs boson decay to invisible particles, assuming standard model production rates and a Higgs boson mass of 125.09 GeV. Results from a combination of this analysis and other direct searches for invisible decays of the Higgs boson, performed using data collected at s=7, 8, and 13 TeV, are presented. An observed (expected) upper limit of 0.19(0.15), at 95% confidence level, is set on the branching fraction of invisible decays of the Higgs boson. The combined limit represents the most stringent bound on the invisible branching fraction of the Higgs boson reported to date. This result is also interpreted in the context of Higgs-portal dark matter models, in which upper bounds are placed on the spin-independent dark-matter-nucleon scattering cross section.
Validation of the CMS Magnetic Field Map Klyukhin, V. I.; Amapane, N.; Ball, A. ...
Journal of superconductivity and novel magnetism,
02/2015, Letnik:
28, Številka:
2
Journal Article
Recenzirano
Odprti dostop
The Compact Muon Solenoid (CMS) is a general purpose detector, designed to run at the highest luminosity at the CERN Large Hadron Collider (LHC). Its distinctive features include a 4-T ...superconducting solenoid with 6-m-diameter by 12.5-m-length free bore, enclosed inside a 10,000-ton return yoke made of construction steel. The return yoke consists of five dodecagonal three-layered barrel wheels and four end-cap disks at each end comprised of steel blocks up to 620 mm thick, which serve as the absorber plates of the muon detection system. To measure the field in and around the steel, a system of 22 flux loops and 82 three-dimensional (3-D) Hall sensors is installed on the return yoke blocks. A TOSCA 3-D model of the CMS magnet is developed to describe the magnetic field everywhere outside the tracking volume measured with the field-mapping machine. The magnetic field description is compared with the measurements and discussed.
Measurements of the production of the standard model Higgs boson decaying to a W boson pair are reported. The W+W− candidates are selected in events with an oppositely charged lepton pair, large ...missing transverse momentum, and various numbers of jets. To select Higgs bosons produced via vector boson fusion and associated production with a W or Z boson, events with two jets or three or four leptons are also selected. The event sample corresponds to an integrated luminosity of 35.9fb−1, collected in pp collisions at s=13TeV by the CMS detector at the LHC during 2016. Combining all channels, the observed cross section times branching fraction is 1.28−0.17+0.18 times the standard model prediction for the Higgs boson with a mass of 125.09GeV. This is the first observation of the Higgs boson decay to W boson pairs by the CMS experiment.
The cross sections for ϒ(1S), ϒ(2S), and ϒ(3S) production in lead–lead (PbPb) and proton–proton (pp) collisions at sNN=5.02 TeV have been measured using the CMS detector at the LHC. The nuclear ...modification factors, RAA, derived from the PbPb-to-pp ratio of yields for each state, are studied as functions of meson rapidity and transverse momentum, as well as PbPb collision centrality. The yields of all three states are found to be significantly suppressed, and compatible with a sequential ordering of the suppression, RAA(ϒ(1S))>RAA(ϒ(2S))>RAA(ϒ(3S)). The suppression of ϒ(1S) is larger than that seen at sNN=2.76TeV, although the two are compatible within uncertainties. The upper limit on the RAA of ϒ(3S) integrated over pT, rapidity and centrality is 0.096 at 95% confidence level, which is the strongest suppression observed for a quarkonium state in heavy ion collisions to date.
PDF
