Display omitted
► We describe a new EGOFET capable to sense dopamine. ► Interface engineering of gate electrode merged with EGOFET transduction provide a powerful sensing approach. ► EGOFET ...sensitivity is effective down to pico-molar concentration of dopamine.
We describe a potentiometric sensor based on Electrolyte-Gated Organic Field-Effect Transistor (EGOFET) for “in vitro” detection of dopamine. The sensing element of this device resides at the Au gate–aqueous solution interface by means of a self-assembled monolayer (SAM) composed by cysteamine and 4-formylphenyl boronic acid. The covalent and selective adsorption of dopamine induces a surface dipole potential which shifts the electrode work function and modulates the double layer capacitance. As a result, our device is capable to detect dopamine up to pico-molar concentration showing higher sensitivity with respect to other approaches. For this reason the interface engineering of our EGOFET gate is a promising route for diagnostic applications.
This protocol describes how to perform lithographically controlled wetting (LCW). LCW enables large-area patterning of microstructures and nanostructures of soluble materials, either organic or ...inorganic, including biological compounds in buffer solutions or compounds for cell guidance. LCW exploits the capillary forces of menisci established under the protrusions of a stamp placed in contact with a liquid film. In the space confined by each meniscus, the self-organization of the deposited solute yields highly ordered structures that replicate the motif of the stamp protrusions. The method does not require any particular infrastructure and can be accomplished by using simple tools such as compact discs or microscopy grids. Compared with other printing methods, LCW is universal for soluble materials, as it does not require chemical binding or other specific interactions between the solute and the surface. A process cycle takes from 2 to 36 h to be completed, depending on the choice of materials.
Molecular multifunctional materials have potential applications in many fields of technology, such as electronics, optics and optoelectronics, information storage, sensing, and energy conversion and ...storage. These materials are designed exhibit enhanced properties, and at the same time are endowed with functional groups that control their interactions, and hence self‐organization, into a variety of supramolecular architectures. Since most of the multifunctional materials are soluble, lithographic methods suitable for solutions are attracting increasing interest for the manufacturing of the new materials and their applications. The aim of this paper is to highlight some of the recent advances of solution‐based fabrication of multifunctional materials. We explain and examine the principles, processes, materials, and limitations of this class of patterning techniques, which we term unconventional wet lithographies (UWLs). We describe their ability to yield patterns and structures whose feature sizes range from nanometers to micrometers. In the following sections, we focus our attention on micromolding in capillaries, lithographically controlled wetting, and grid‐assisted deposition, the most used methods demonstrated to lead to fully operating devices.
The use of unconventional wet lithographies in the fabrication of small and regularly spaced nanostructures of soluble functional materials, including molecules oligomers, macromolecules, polymers, nanoparticles, clusters, and more generally, soft matter, is reviewed. This is important because most of the functional materials are synthesized in solution or are soluble.
Antibody-antigen (Ab-Ag) recognition is the primary event at the basis of many biosensing platforms. In label-free biosensors, these events occurring at solid-liquid interfaces are complex and often ...difficult to control technologically across the smallest length scales down to the molecular scale. Here a molecular-scale technique, such as single-molecule force spectroscopy, is performed across areas of a real electrode functionalized for the immunodetection of an inflammatory cytokine, viz. interleukin-4 (IL4). The statistical analysis of force-distance curves allows us to quantify the probability, the characteristic length scales, the adhesion energy, and the time scales of specific recognition. These results enable us to rationalize the response of an electrolyte-gated organic field-effect transistor (EGOFET) operated as an IL4 immunosensor. Two different strategies for the immobilization of IL4 antibodies on the Au gate electrode have been compared: antibodies are bound to (i) a smooth film of His-tagged protein G (PG)/Au; (ii) a 6-aminohexanethiol (HSC6NH2) self-assembled monolayer on Au through glutaraldehyde. The most sensitive EGOFET (concentration minimum detection level down to 5 nM of IL4) is obtained with the first functionalization strategy. This result is correlated to the highest probability (30%) of specific binding events detected by force spectroscopy on Ab/PG/Au electrodes, compared to 10% probability on electrodes with the second functionalization. Specifically, this demonstrates that Ab/PG/Au yields the largest areal density of oriented antibodies available for recognition. More in general, this work shows that specific recognition events in multiscale biosensors can be assessed, quantified, and optimized by means of a nanoscale technique.
Microelectrode arrays (MEA) record extracellular local field potentials of cells adhered to the electrodes. A disadvantage is the limited signal-to-noise ratio. The state-of-the-art background noise ...level is about 10 μVpp. Furthermore, in MEAs low frequency events are filtered out. Here, we quantitatively analyze Au electrode/electrolyte interfaces with impedance spectroscopy and noise measurements. The equivalent circuit is the charge transfer resistance in parallel with a constant phase element that describes the double layer capacitance, in series with a spreading resistance. This equivalent circuit leads to a Maxwell-Wagner relaxation frequency, the value of which is determined as a function of electrode area and molarity of an aqueous KCl electrolyte solution. The electrochemical voltage and current noise is measured as a function of electrode area and frequency and follow unambiguously from the measured impedance. By using large area electrodes the noise floor can be as low as 0.3 μVpp. The resulting high sensitivity is demonstrated by the extracellular detection of C6 glioma cell populations. Their minute electrical activity can be clearly detected at a frequency below about 10 Hz, which shows that the methodology can be used to monitor slow cooperative biological signals in cell populations.
Next‐generation neural interfaces for bidirectional communication with the central nervous system aim to achieve the intimate integration with the neural tissue with minimal neuroinflammatory ...response, high spatio‐temporal resolution, very high sensitivity, and readout stability. The design and manufacturing of devices for low power/low noise neural recording and safe and energy‐efficient stimulation that are, at the same time, conformable to the brain, with matched mechanical properties and biocompatibility, is a convergence area of research where neuroscientists, materials scientists, and nanotechnologists operate synergically. The biotic–abiotic neural interface, however, remains a formidable challenge that prompts for new materials platforms and innovation in device layouts. Conductive polymers (CP) are attractive materials to be interfaced with the neural tissue and to be used as sensing/stimulating electrodes because of their mixed ionic‐electronic conductivity, their low contact impedance, high charge storage capacitance, chemical versatility, and biocompatibility. This manuscript reviews the state‐of‐the‐art of poly(3,4‐ethylenedioxythiophene)‐based neural interfaces for extracellular recording and stimulation, focusing on those technological approaches that are successfully demonstrated in vivo. The aim is to highlight the most reliable and ready‐for‐clinical‐use solutions, in terms of materials technology and recording performance, other than spot major limitations and identify future trends in this field.
A comprehensive review of the latest advances in the field of implantable neural interfaces based on poly(3,4‐ethylenedioxythiophene) and its derivates. The aim is to highlight the most reliable, translatable (or ready) solutions, in terms of material technology and recording/stimulation performances, as well as, to identify current bottlenecks and future trends of this rapidly evolving field.
Poly (3,4-ethylendioxythiophene) polystyrene sulphonate (PEDOT:PSS) is the workhorse of organic bioelectronics and is steadily gaining interest also in tissue engineering due to the opportunity to ...endow traditional biomaterials for scaffolds with conductive properties. Biomaterials capable of promoting neural stem cell differentiation by application of suitable electrical stimulation protocols are highly desirable in neural tissue engineering. In this study, we evaluated the adhesion, proliferation, maintenance of neural crest stemness markers and neurogenic commitment of neural crest-derived human dental pulp stem cells (hDPSCs) cultured on PEDOT:PSS nanostructured thin films deposited either by spin coating (SC-PEDOT) or by electropolymerization (ED-PEDOT). In addition, we evaluated the immunomodulatory properties of hDPSCs on PEDOT:PSS by investigating the expression and maintenance of the Fas ligand (FasL). We found that both SC-PEDOT and ED-PEDOT thin films supported hDPSCs adhesion and proliferation; however, the number of cells on the ED-PEDOT after 1 week of culture was significantly higher than that on SC-PEDOT. To be noted, both PEDOT:PSS films did not affect the stemness phenotype of hDPSCs, as indicated by the maintenance of the neural crest markers Nestin and SOX10. Interestingly, neurogenic induction was clearly promoted on ED-PEDOT, as indicated by the strong expression of MAP-2 and
β
—Tubulin-III as well as evident cytoskeletal reorganisation and appreciable morphology shift towards a neuronal-like shape. In addition, strong FasL expression was detected on both undifferentiated or undergoing neurogenic commitment hDPSCs, suggesting that ED-PEDOT supports the expression and maintenance of FasL under both expansion and differentiation conditions.
The next generation of brain–machine interfaces are envisioned to couple signal transduction, filtering, and sorting on board with minimum power consumption and maximum bio‐integrability. These ...functional needs shall be mandatorily met in order to design efficient closed‐loop brain–machine interfaces aimed at treating and monitoring various disorders of the central and peripheral nervous system. Here, the pivotal role is highlighted that organic bioelectronics may have in the contextual development of all these three desiderata, by demonstrating a modular organic‐electronics circuit toward real‐time signal filtering. The inherent filtering capabilities of electrolyte‐gated organic transistor are tuned via adjustment of operational conditions and benchmarked in an electromyography experiment. Additionally, a whole‐organic signal processing circuitry is presented, coupling such transistors with ad hoc designed organic passive components. This provides the possibility to sort complex signals into their constitutive frequency components in real time, thereby delineating innovative strategies to devise organic‐based functional building‐blocks for brain–machine interfaces.
An organic electronic platform for in situ real‐time signal processing is benchmarked against complex signals. Low‐, high‐ and band‐pass filters are achieved with organic analogs of passive circuit components and coupled to first‐stage amplifiers based on electrolyte‐gated organic transistors, fostering organic bio‐electronics integration in brain–machine interfaces, aiming at on board signal processing with lowered time and power consumption.
Neurofilaments are structural scaffolding proteins of the neuronal cytoskeleton. Upon axonal injury, the neurofilament light chain (NF‐L) is released into the interstitial fluid and eventually ...reaches the cerebrospinal fluid and blood. Therefore, NF‐L is emerging as a biomarker of neurological disorders, including neurodegenerative dementia, Parkinson's disease, and multiple sclerosis. It is challenging to quantify NF‐L in bodily fluids due to its low levels. This work reports the detection of NF‐L in aqueous solutions with an organic electronic device. The biosensor is based on the electrolyte‐gated organic field‐effect transistor (EGOFET) architecture and can quantify NF‐L down to sub‐pM levels; thanks to modification of the device gate with anti‐NF‐L antibodies imparted with potentially controlled orientation. The response is fitted to the Guggenheim–Anderson–De Boer adsorption model to describe NF‐L adsorption at the gate/electrolyte interface, to consider the formation of a strongly adsorbed protein layer bound to the antibody and the formation of weakly bound NF‐L multilayers, an interpretation which is also backed up by morphological characterization via atomic force microscopy. The label‐free, selective, and rapid response makes this EGOFET biosensor a promising tool for the diagnosis and monitoring of neuronal damages through the detection of NF‐L in physio‐pathological ranges.
The detection of neurofilaments light chain (NF‐L) in aqueous solutions with an electrolyte‐gated organic field‐effect transistor sensor down to sub‐pm levels is reported. The response is fitted to the Guggenheim–Anderson–De Boer adsorption model to describe NF‐L adsorption at the gate/electrolyte interface and the formation of NF‐L multilayers.
PDF
