In the past three decades invasive mycoses have globally emerged as a persistent source of healthcare-associated infections. The cell wall surrounding the fungal cell opposes the turgor pressure that ...otherwise could produce cell lysis. Thus, the cell wall is essential for maintaining fungal cell shape and integrity. Given that this structure is absent in host mammalian cells, it stands as an important target when developing selective compounds for the treatment of fungal infections. Consequently, treatment with echinocandins, a family of antifungal agents that specifically inhibits the biosynthesis of cell wall (1-3)β-D-glucan, has been established as an alternative and effective antifungal therapy. However, the existence of many pathogenic fungi resistant to single or multiple antifungal families, together with the limited arsenal of available antifungal compounds, critically affects the effectiveness of treatments against these life-threatening infections. Thus, new antifungal therapies are required. Here we review the fungal cell wall and its relevance in biotechnology as a target for the development of new antifungal compounds, disclosing the most promising cell wall inhibitors that are currently in experimental or clinical development for the treatment of some invasive mycoses.
A mild, efficient synthesis of sulfonyl fluorides from aryl and heteroaryl bromides utilizing palladium catalysis is described. The process involves the initial palladium-catalyzed sulfonylation of ...aryl bromides using DABSO as an SO
source, followed by
treatment of the resultant sulfinate with the electrophilic fluorine source NFSI. This sequence represents the first general method for the sulfonylation of aryl bromides, and offers a practical, one-pot alternative to previously described syntheses of sulfonyl fluorides, allowing rapid access to these biologically important molecules. Excellent functional group tolerance is demonstrated, with the transformation successfully achieved on a number of active pharmaceutical ingredients, and their precursors. The preparation of peptide-derived sulfonyl fluorides is also demonstrated.
Despite its biological and medical relevance, traffic from the Golgi to the plasma membrane (PM) is one of the least understood steps of secretion. Exomer is a protein complex that mediates the ...trafficking of certain cargoes from the trans-Golgi network/early endosomes to the PM in budding yeast. Here, we show that in Schizosaccharomyces pombe the Cfr1 and Bch1 proteins constitute the simplest form of an exomer. Cfr1 co-immunoprecipitates with Assembly Polypeptide adaptor 1 (AP-1), AP-2, and Golgi-localized, gamma-adaptin ear domain homology, ARF-binding (GGA) subunits, and cfr1
interacts genetically with AP-1 and GGA genes. Exomer-defective cells exhibit multiple mild defects, including alterations in the morphology of Golgi stacks and the distribution of the synaptobrevin-like Syb1 protein, carboxypeptidase missorting, and stress sensitivity. S. pombe apm1Δ cells exhibit a defect in trafficking through the early endosomes that is severely aggravated in the absence of exomer. apm1Δ cfr1Δ cells exhibit a dramatic disorganization of intracellular compartments, including massive accumulation of electron-dense tubulovesicular structures. While the trans-Golgi network/early endosomes are severely disorganized in the apm1Δ cfr1Δ strain, gga21Δ gga22Δ cfr1Δ cells exhibit a significant disturbance of the prevacuolar/vacuolar compartments. Our findings show that exomer collaborates with clathrin adaptors in trafficking through diverse cellular compartments, and that this collaboration is important to maintain their integrity. These results indicate that the effect of eliminating exomer is more pervasive than that described to date, and suggest that exomer complexes might participate in diverse steps of vesicle transport in other organisms.
Background: During the last three decades systemic fungal infections associated to immunosuppressive therapies have become a serious healthcare problem. Clinical development of new antifungals is an ...urgent requirement. Since fungal but not mammalian cells are encased in a carbohydrate-containing cell wall, which is required for the growth and viability of fungi, the inhibition of cell wall synthesizing machinery, such as β(1,3)-D-glucan synthases (GS) and chitin synthases (CS) that catalyze the synthesis of β(1-3)-D-glucan and chitin, respectively, represent an ideal mode of action of antifungal agents. Although the echinocandins anidulafungin, caspofungin and micafungin are clinically well-established GS inhibitors for the treatment of invasive fungal infections, much effort must still be made to identify inhibitors of other enzymes and processes involved in the synthesis of the fungal cell wall.
Purpose: Since natural products (NPs) have been the source of several antifungals in clinical use and also have provided important scaffolds for the development of semisynthetic analogues, this review was devoted to investigate the advances made to date in the discovery of NPs from plants that showed capacity of inhibiting cell wall synthesis targets. The chemical characterization, specific target, discovery process, along with the stage of development are provided here.
Methods: An extensive systematic search for NPs against the cell wall was performed considering all the articles published until the end of 2020 through the following scientific databases: NCBI PubMed, Scopus and Google Scholar and using the combination of the terms “natural antifungals” and “plant extracts” with “fungal cell wall”.
Results: The first part of this review introduces the state of the art of the structure and biosynthesis of the fungal cell wall and considers exclusively those naturally produced GS antifungals that have given rise to both existing semisynthetic approved drugs and those derivatives currently in clinical trials. According to their chemical structure, natural GS inhibitors can be classified as 1) cyclic lipopeptides, 2) glycolipids and 3) acidic terpenoids. We also included nikkomycins and polyoxins, NPs that inhibit the CS, which have traditionally been considered good candidates for antifungal drug development but have finally been discarded after enduring unsuccessful clinical trials. Finally, the review focuses in the most recent findings about the growing field of plant-derived molecules and extracts that exhibit activity against the fungal cell wall. Thus, this search yielded sixteen articles, nine of which deal with pure compounds and seven with plant extracts or fractions with proven activity against the fungal cell wall. Regarding the mechanism of action, seven (44%) produced GS inhibition while five (31%) inhibited CS. Some of them (56%) interfered with other components of the cell wall. Most of the analyzed articles refer to tests carried out in vitro and therefore are in early stages of development.
Conclusion: This report delivers an overview about both existing natural antifungals targeting GS and CS activities and their mechanisms of action. It also presents recent discoveries on natural products that may be used as starting points for the development of potential selective and non-toxic antifungal drugs.
In recent years, invasive fungal infections have emerged as a common source of infections in immunosuppressed patients. All fungal cells are surrounded by a cell wall that is essential for cell ...integrity and survival. It prevents cell death and lysis resulting from high internal turgor pressure. Since the cell wall is not present in animal cells, it is an ideal target for selective invasive fungal infection treatments. The antifungal family known as echinocandins, which specifically inhibit the synthesis of the cell wall β(13)glucan, has been established as an alternative treatment for mycoses. To explore the mechanism of action of these antifungals, we analyzed the cell morphology and glucan synthases localization in
cells during the initial times of growth in the presence of the echinocandin drug caspofungin.
are rod-shaped cells that grow at the poles and divide by a central division septum. The cell wall and septum are formed by different glucans, which are synthesized by four essential glucan synthases: Bgs1, Bgs3, Bgs4, and Ags1. Thus,
is not only a perfect model for studying the synthesis of the fungal β(1-3)glucan, but also it is ideal for examining the mechanisms of action and resistance of cell wall antifungals. Herein, we examined the cells in a drug susceptibility test in the presence of either lethal or sublethal concentrations of caspofungin, finding that exposure to the drug for long periods at high concentrations (>10 µg/mL) induced cell growth arrest and the formation of rounded, swollen, and dead cells, whereas low concentrations (<10 µg/mL) permitted cell growth with a mild effect on cell morphology. Interestingly, short-term treatments with either high or low concentrations of the drug induced effects contrary to those observed in the susceptibility tests. Thus, low drug concentrations induced a cell death phenotype that was not observed at high drug concentrations, which caused transient fungistatic cell growth arrest. After 3 h, high concentrations of the drug caused the following: (i) a decrease in the GFP-Bgs1 fluorescence level; (ii) altered locations of Bgs3, Bgs4, and Ags1; and (iii) a simultaneous accumulation of cells with calcofluor-stained incomplete septa, which at longer times resulted in septation uncoupling from plasma membrane ingression. The incomplete septa revealed with calcofluor were found to be complete when observed via the membrane-associated GFP-Bgs or Ags1-GFP. Finally, we found that the accumulation of incomplete septa depended on Pmk1, the last kinase of the cell wall integrity pathway.
Dni1 and Dni2 facilitate cell fusion during mating. Here, we show that these proteins are interdependent for their localization in a plasma membrane subdomain, which we have termed the mating fusion ...domain. Dni1 compartmentation in the domain is required for cell fusion. The contribution of actin, sterol-dependent membrane organization, and Dni2 to this compartmentation was analysed, and the results showed that Dni2 plays the most relevant role in the process. In turn, the Dni2 exit from the endoplasmic reticulum depends on Dni1. These proteins share the presence of a cysteine motif in their first extracellular loop related to the claudin GLWxxC(8–10 aa)C signature motif. Structure–function analyses show that mutating each Dni1 conserved cysteine has mild effects, and that only simultaneous elimination of several cysteines leads to a mating defect. On the contrary, eliminating each single cysteine and the C-terminal tail in Dni2 abrogates Dni1 compartmentation and cell fusion. Sequence alignments show that claudin trans-membrane helixes bear small-XXX-small motifs at conserved positions. The fourth Dni2 trans-membrane helix tends to form homo-oligomers in
Escherichia
plasma membrane, and two concatenated small-XXX-small motifs are required for efficient oligomerization and for Dni2 export from the yeast endoplasmic reticulum. Together, our results strongly suggest that Dni2 is an ancient claudin that blocks Dni1 diffusion from the intercellular region where two plasma membranes are in close proximity, and that this function is required for Dni1 to facilitate cell fusion.
The involvement of Schizosaccharomyces pombe prm1(+) in cell fusion during mating and its relationship with other genes required for this process have been addressed. S. pombe prm1Δ mutant exhibits ...an almost complete blockade in cell fusion and an abnormal distribution of the plasma membrane and cell wall in the area of cell-cell interaction. The distribution of cellular envelopes is similar to that described for mutants devoid of the Fig1-related claudin-like Dni proteins; however, prm1(+) and the dni(+) genes act in different subpathways. Time-lapse analyses show that in the wild-type S. pombe strain, the distribution of phosphatidylserine in the cytoplasmic leaflet of the plasma membrane undergoes some modification before an opening is observed in the cross wall at the cell-cell contact region. In the prm1Δ mutant, this membrane modification does not take place, and the cross wall between the mating partners is not extensively degraded; plasma membrane forms invaginations and fingers that sometimes collapse/retract and that are sometimes strengthened by the synthesis of cell-wall material. Neither prm1Δ nor prm1Δ dniΔ zygotes lyse after cell-cell contact in medium containing and lacking calcium. Response to drugs that inhibit lipid synthesis or interfere with lipids is different in wild-type, prm1Δ, and dni1Δ strains, suggesting that membrane structure/organization/dynamics is different in all these strains and that Prm1p and the Dni proteins exert some functions required to guarantee correct membrane organization that are critical for cell fusion.
The purpose of this work is the morphological.11 characterization of a Voronoi-based biomimetic bone scaffold, developed through an interactive generative design process and obtained by an additive ...manufacturing system. In particular, the assessment of its characteristics was carried out according to the main indices of trabecular bone structures. Therefore, a biomimetic cubic bone scaffold (
10
×
10
×
10
mm) with controlled porosity (
P
% = 80%) and mean pores size (
D
p
=
0.800
mm
) was first designed and then manufactured with Ti6Al4V by means of EOSINT M270, a direct metal laser sintering system. The surface morphology of the scaffold was analyzed by a Scanning Electron Microscopy, equipped with an Energy Dispersive X-ray Spectrometry, while the internal morphology was examined through a high-resolution micro-CT SkyScan 1172. Finally, the morphometric assessment of the scaffold was carried out using ImageJ with BoneJ, a tool for image bone analysis, by measuring the main indices for the characterization of trabecular bone structure. The Ti6Al4V scaffold, even though with smaller porosity (
P
% = 73%) and mean pores size (
D
p
=
0.695
mm
) with respect to the expected values, was successfully fabricated with fully interconnected porous architecture and intact trabecular skeleton. Moreover, the main indices for the characterization of trabecular bone structure were well congruent with the actual natural bone. A viable and reproducible method to fabricate Ti6Al4V biomimetic bone scaffolds, with controlled porosity and mean pores size, was presented. These kind of scaffolds allowed reproducing the actual architecture of the trabecular bone and could be suitable for Bone Tissue Engineering, according to specific surgical requirements.
Abstract
Background
The fungal cell wall is an essential and robust external structure that protects the cell from the environment. It is mainly composed of polysaccharides with different functions, ...some of which are necessary for cell integrity. Thus, the process of fractionation and analysis of cell wall polysaccharides is useful for studying the function and relevance of each polysaccharide, as well as for developing a variety of practical and commercial applications. This method can be used to study the mechanisms that regulate cell morphogenesis and integrity, giving rise to information that could be applied in the design of new antifungal drugs. Nonetheless, for this method to be reliable, the availability of trustworthy commercial recombinant cell wall degrading enzymes with non-contaminating activities is vital.
Results
Here we examined the efficiency and reproducibility of 12 recombinant endo-β(1,3)-
d
-glucanases for specifically degrading the cell wall β(1,3)-
d
-glucan by using a fast and reliable protocol of fractionation and analysis of the fission yeast cell wall. This protocol combines enzymatic and chemical degradation to fractionate the cell wall into the four main polymers: galactomannoproteins, α-glucan, β(1,3)-
d
-glucan and β(1,6)-
d
-glucan. We found that the GH16 endo-β(1,3)-
d
-glucanase PfLam16A from
Pyrococcus furiosus
was able to completely and reproducibly degrade β(1,3)-
d
-glucan without causing the release of other polymers. The cell wall degradation caused by PfLam16A was similar to that of Quantazyme, a recombinant endo-β(1,3)-
d
-glucanase no longer commercially available. Moreover, other recombinant β(1,3)-
d
-glucanases caused either incomplete or excessive degradation, suggesting deficient access to the substrate or release of other polysaccharides.
Conclusions
The discovery of a reliable and efficient recombinant endo-β(1,3)-
d
-glucanase, capable of replacing the previously mentioned enzyme, will be useful for carrying out studies requiring the digestion of the fungal cell wall β(1,3)-
d
-glucan. This new commercial endo-β(1,3)-
d
-glucanase will allow the study of the cell wall composition under different conditions, along the cell cycle, in response to environmental changes or in cell wall mutants. Furthermore, this enzyme will also be greatly valuable for other practical and commercial applications such as genome research, chromosomes extraction, cell transformation, protoplast formation, cell fusion, cell disruption, industrial processes and studies of new antifungals that specifically target cell wall synthesis.
In regenerative medicine, 3D scaffolds are used to sustain the regeneration of tissues in removed or damaged parts of the human body. As such practices are being widely experimented in clinical ...applications, the design, the materials and the manufacturing process to obtain efficient 3D biocompatible lattices are being significantly investigated. Nevertheless, most of the proposed designs are based on regular 3D shapes obtained from the repetition of unit cells disposed in a three-dimensional array. This approach does not exploit the whole potential of computer-aided design tools coupled with manufacturing capabilities for freeform shapes. In this paper, we propose a method to model biomimetic lattices controlling the porosity and the pores size of scaffolds to be integrated with the anatomical shape of the defect. The method has been implemented in bone tissue case study and implements a generative design approach based on Voronoi diagrams.