We report development of ytterbium doped silica fiber with nanostructured core for laser applications. We study influence of non-continuous distributed Yb dopants on gain, beam quality, and fiber ...laser performance. The fiber core is composed of over 43 thousand nanorods with a central part doped with Yb. The diameter of each nanorod is 72 nm. With this method we obtained a flat refractive index profile with uniformity of 1.3 × 10
refractive index unit (RIU) despite the non-uniformity of 1.2 × 10
RIU in Yb doped preform rods used for the fiber development. We demonstrate a nanostructured core single-mode fiber laser with 61.8% of slope efficiency, and extremely low numerical aperture 0.027 of generated mode.
A user‐friendly, fiber‐coupled, single‐photon source operating at telecom wavelengths is a key component of photonic quantum networks providing long‐haul, ultra‐secure data exchange. To take full ...advantage of quantum‐mechanical data protection and to maximize the transmission rate and distance, a true quantum source providing single photons on demand is highly desirable. This great challenge is tackled by developing a ready‐to‐use semiconductor quantum‐dot‐based device that launches single photons at a wavelength of 1.3 µm directly into a single‐mode optical fiber. In the proposed approach, the quantum dot is deterministically integrated into a nanophotonic structure to ensure efficient on‐chip coupling into a fiber. The whole arrangement is integrated into a 19ʺ compatible housing to enable stand‐alone operation by cooling via a compact Stirling cryocooler. The realized source delivers single photons with a multiphoton events probability as low as 0.15 and a single‐photon emission rate of up to 73 kHz into a standard telecom single‐mode fiber.
A user‐friendly, compact, and portable triggered single‐photon source operating in the telecom O‐band is demonstrated. The device provides single photons with g(2)(0) = 0.15 and a flux of up to 73 kHz at a standard physical‐contact single‐mode fiber connector output. A fully deterministic fabrication technology makes it the first application‐ready quantum‐dot‐based source to enable ultra‐secure data exchange in future fiber‐based quantum communication networks.
The cover image presents the first stand‐alone telecom quantum light source launching single photons directly into a single‐mode optical fiber. It includes a semiconductor quantum dot (QD) which is ...excited by an integrated laser and cooled by compact Stirling cooler at 40 K. The advanced quantum device includes all filter elements to suppress intensive laser light and to direct single photons at a wavelength of 1.3 µm to the output. For further details see article number 2000018 by Stephan Reitzenstein and co‐workers.
This paper investigates the evolution of kurtosis of the input Gaussian amplified spontaneous emission (ASE) noise in a nonlinear fiber with negligible dispersion. The nonlinear Schrodinger equation ...(NLSE) describing propagation in optical fibers is simplified such that the fiber represents a zero memory nonlinear (ZMNL) system, and this approximation allows the development of analytical formulas for the statistical moments of the output noise. It is possible to calculate moments of all integer orders and the explicit expressions for the first four moments are given. The investigations show that the ASE noise does not preserve its Gaussian character when Kerr nonlinearity is significant. This observation proves that the common assumption of the Gaussian output ASE is not necessarily valid. Numerical simulations are provided to support the derivation. Kurtosis deviating significantly from the value typical for Gaussian noise is also an indicator that BER calculation in the coherent systems based on the assumption that ASE is Gaussian is likely to be inaccurate.
A new and straightforward optical signal quality metric, which is based on the approximation of the analytical probability density function by its Laguerre expansion, is proposed. This expansion uses ...statistical moments to approximate the true statistics, but, unlike the well-known Gaussian approximation, higher order moments can be used as well. The quality of the proposed metric is discussed and the metric is compared with the Gaussian approximation. It is shown that the new metric provides not only a good estimation of the bit error rate in the range of practical interest but, contrary to the Gaussian approximation, correctly estimates optimum decision threshold and accurately pictures the shape of the noise distribution.
We experimentally studied axial stress distribution in recently developed optical all-solid fibers with nanostructured cores. In this type of fiber, the core is composed of thousands of low and high ...refractive index glass rods with individual diameters of a few hundred nanometers. A distribution of nanorods determines the effective distribution of the refractive index in the core. A structure of nanorods may introduce unrevealed axial stress distribution after fiber drawing, which may induce change of the expected refractive index value. We studied stress in a custom made nanostructured silica fiber with parabolic refractive index distribution in the core and compared it with the reference SMF-28 fiber. For nanostructured fibers we proved that the axial stress is purely thermal with negligible contribution of mechanical stress. This results in the presence of tensile stress in the fiber core, which is in contrary to a standard telecom fiber, where a compressive stress in the core exists. We showed that measured axial stress has negligible impact on refractive index distribution of nanostructured fibers, thus it does not affect its performance.
A user-friendly fibre-coupled single-photon source operating at telecom wavelengths is a key component of photonic quantum networks providing long-haul ultra-secure data exchange. To take full ...advantage of quantum-mechanical data protection and to maximize the transmission rate and distance, a true quantum source providing single-photons on demand is highly desirable. We tackle this great challenge by developing a ready to use semiconductor quantum dot (QD)-based device that launches single photons at a wavelength of 1.3 um directly into a single-mode optical fibre. In our approach the QD is deterministically integrated into a nanophotonic structure to ensure efficient on-chip coupling into a fibre. The whole arrangement is integrated into a 19" compatible housing to enable stand-alone operation by cooling via a compact Stirling cryocooler. The realized source delivers single photons with multiphoton events probability as low as 0.15 and single-photon emission rate up to 73 kHz into a standard telecom single-mode fibre.
PDF
