The generation of a two-octave supercontinuum from the visible to mid-infrared (700-2800 nm) in a non-silica graded-index multimode fiber is reported. The fiber design is based on a nanostructured ...core comprised of two types of drawn lead-bismuth-gallate glass rods with different refractive indices. This yields an effective parabolic index profile and ten times increased nonlinearity when compared to silica fibers. Using femtosecond pulse pumping at wavelengths in both normal and anomalous dispersion regimes, a detailed study is carried out into the supercontinuum generating mechanisms and instabilities seeded by periodic self-imaging. Significantly, suitable injection conditions in the high power regime are found to result in the output beam profile showing clear signatures of beam self-cleaning from nonlinear mode mixing. Experimental observations are interpreted using spatio-temporal 3+1D numerical simulations of the generalized nonlinear Schrödinger equation, and simulated spectra are in excellent agreement with experiment over the full two-octave spectral bandwidth. Experimental comparison with the generation of supercontinuum in a silica graded-index multimode fiber shows that the enhanced nonlinear refractive index of the lead-bismuth-gallate fiber yields a spectrum with a significantly larger bandwidth. These results demonstrate a new pathway towards the generation of bright, ultrabroadband light sources in the mid-infrared.
We demonstrate that commercially available poly(D,L-lactic acid) (PDLLA) is a suitable material for the fabrication of biodegradable optical fibers with a standard heat drawing process. To do so we ...report on the chemical and optical characterization of the material. We address the influence of the polymer processing on the molecular weight and thermal properties of the polymer following the preparation of the polymer preforms and the fiber optic drawing process. We show that cutback measurements of the first optical fibers drawn from PDLLA return an attenuation coefficient as low as 0.11 dB/cm at 772 nm, which is the lowest loss reported this far for optical fibers drawn from bio-resorbable material. We also report on the dispersion characteristics of PDLLA, and we find that the thermo-optic coefficient is in the range of -10 -4 °C -1 . Finally, we studied the degradation of PDLLA fibers in vitro, revealing that fibers with the largest diameter of 600 μm degrade faster than those with smaller diameters of 300 and 200 μm and feature more than 84% molecular weight loss over a period of 3 months. The evolution of the optical loss of the fibers as a function of time during immersion in phosphate-buffered saline indicates that these devices are potential candidates for use in photodynamic therapy-like application scenarios.
Abstract
We developed a new kind of compact flat-surface nanostructured gradient index vortex phase mask, for the effective generation of optical vortex beams in broadband infrared wavelength range. ...A low-cost nanotechnological material method was employed for this work. The binary structure component consists of 17,557 nano-sized rods made of two lead–bismuth–gallium silicate glasses which were developed in-house. Those small rods are spatially arranged in such a way that, according to effective medium theory, the refractive index of this internal structure is constant in the radial direction and linearly changes following azimuthal angle. Numerical results demonstrated that a nanostructured vortex phase mask with a thickness of 19 μm can convert Gaussian beams into fundamental optical vortices over 290 nm wavelength bandwidth from 1275 to 1565 nm. This has been confirmed in experiments using three diode laser sources operating at 1310, 1550, and 1565 nm. The generation of vortex beams is verified through their uniform doughnut-like intensity distributions, clear astigmatic transformation patterns, and spiral as well as fork-like interferograms. This new flat-surface component can be directly mounted to an optical fiber tip for simplifying vortex generator systems as well as easier manipulation of the generated OVB in three-dimensional space.
We present a novel method for the development of a micro lenslets hexagonal array. We use gradient index (GRIN) micro lenses where the variation of the refraction index is achieved with a structure ...of nanorods made of 2 types of glasses. To develop the GRIN micro lens array, we used a modified stack-and-draw technology which was originally applied for the fabrication of photonic crystal fibers. This approach results in a completely flat element that is easy to integrate with other optical components and can be effectively used in high refractive index medium as liquids. As a proof-of-concept of the method we present a hexagonal array of 469 GRIN micro lenses with a diameter of 20 µm each and 100% fill factor. The GRIN lens array is further used to build a Shack-Hartmann detector for measuring wavefront distortion. A 50 lens/mm sampling density is achieved.
We study an optical device designed for converting the polarized Gaussian beam into an optical vortex of tunable polarization. The proposed device comprised a set of three specially prepared nematic ...liquid crystal cells and a nano-spherical phase plate fabricated from two types of glass nanotubes. This device generates a high-quality optical vortex possessing one of the multiple polarization states from the uniformly polarized input Gaussian beam. Its small size, simplicity of operation, and electrical steering can be easily integrated into the laboratory and industrial systems, making it a promising alternative to passive vortex retarders and spatial light modulators.
The advances in fluorescent diamond-based magnetic field sensors have led this technology into the field of fiber optics. Recently, devices employing diamond nanobeams or diamond chips embedded on an ...optical fiber tip enabled achieving fT-level sensitivities. Nevertheless, these demonstrations were still confined to operation over localized magnetic field sources. A new approach of volumetric incorporation of nanodiamonds into the optical fiber core enables optical fibers sensitive to magnetic field at any point along the fiber length. We show that information on the perturbed spin state of a diamond nitrogen-vacancy color center can be transmitted over a macroscopic length in an optical fiber, in presence of noise from large concentration of the color centers along the fiber. This is exploited in optical readout at the fiber output not only of the magnetic field value, but also spatially variable information on the field, which enables the localization of its source.
This research investigates the visible upconversion luminescence which is induced by multiphoton absorption of soft glass fiber defects. The study of this phenomenon has thus far been restricted to ...standard silica fibers. We observed the emission of green and cyan light as a consequence of fiber material ionization. We investigate both the commercial ZBLAN step index and in-house-made tellurite nanostructured graded-index fibers. For the latter, the analysis of the luminescence signal permits us to determine the core and cladding refractive index difference. Upconversion luminescence is a powerful tool for characterizing soft glass fibers and a promising platform for innovative photonic technologies and mid-IR applications.
We report on successful refractive index profiling of commercially available step-index and in-house made graded-index multimode specialty optical fibers by means of X-ray computed microtomography. ...Our results demonstrate that the latter is an advantageous technique for characterizing large core optical fibers, which allows for retrieving information about the refractive index at optical frequencies by exploiting the absorption coefficient of X-rays.
We report on near-infrared supercontinuum generation in a submeter-long single-mode, nanostructured core fiber. The fiber core is composed of few thousand pure silica and germanium-doped silica glass ...nanorods with diameter of 200 nm each. The nanorods’ distribution is calculated based on the Maxwell–Garnett effective medium approach to mimic effective parabolic refractive index distribution in the fiber core. The standard stack-and-draw method was used to scale down the fiber structure and obtain subwavelength nanorods in the core. Size and distribution of individual nanorods are essential to determine modal and dispersion properties of the fiber without assistance of air holes in the fiber cladding. We study supercontinuum generation performance in this nanostructured core fiber pumping with low-cost microchip laser operating at 1550 nm with 1 ns pulse length and pulse energy of 0.4 µJ. A modulation instability-driven supercontinuum is generated in the fiber, covering a wavelength span of 1400–2300 nm. Due to possibility of dispersion engineering and all-solid structure the nanostructured fibers offer new possibilities for development of low-cost all-fiber supercontinuum light sources for the near-infrared range and cascaded ultrabroadband supercontinuum all-fiber systems.
Multimodal interference is frequently pointed out as one of the main limiting factors in gas sensing setups which utilize hollow-core optical fibers as gas cells. In this paper we demonstrate ...suppression of optical fringes that originate from propagation of higher order modes in an anti-resonant hollow-core fiber by controlled fiber bending. Near-infrared broadband absorption spectroscopy is used to characterize the fringe patterns observed when higher order modes are excited and suppressed. A tunable laser diode emitting near 1687 nm is used to present positive impact of bending the hollow-core fiber on signals recorded with both direct absorption spectroscopy and wavelength modulation spectroscopy of methane. Bending radius of 30 mm was found optimal for the setup presented in this work, leading to sub-ppm-level detection limit at 1687 nm with 7.35-m-long fiber.